• 한국해양공학회지
• /
• 제23권6호
• /
• pp.124-130
• /
• 2009

This study presents a finite element simulation of elastic waves for detecting anti-symmetric damages in an adhesively-bonded single lap joint. Plane strain elements were used for modeling adherents (aluminum) and adhesives (epoxy). Three types of damage were introduced: thickness reduction, elasticity deterioration, and voids in the adhesive layers, and two excitation and reception arrangements (ER1 and ER2) were used to investigate the detectability of the damage. The simulation showed that symmetrically located damage, such as a thickness reduction, can be detected by one excitation and one reception arrangement (ER1) and anti-symmetric damages, such as elasticity deterioration and voids, can be detected by modified two-point elastic wave excitation (ER2). Compared with the ER1 arrangement, the ER2 arrangement does not require a baseline signal for damage detection; hence, an efficient method of anti-symmetric damage detection in an adhesively-bonded single lap joint is proposed.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.172-177
• /
• 2010

This study presents an explicit dynamic analysis of an adhesively bonded single-lap joint under an impact load. The finite element software, ANSYS LS-DYNA, was used for the analysis and Von Mises stresses were obtained from the analysis. To model the adherents, solid elements were used and a rigid body was assumed for impactor modeling. Three impact heights (1 m, 5 m, and 10 m) were applied to consider different impact conditions and infinite boundary conditions were applied to the end-area of each adherent to save computational time in the analysis. In addition to investigating the stresses in the normal state, we also investigated the stresses in a damaged state (elasticity deterioration), simulated by a change in Young's modulus for 36 of the 3600 elements in the upper layer of the adhesive. The results showed that the location of damage is critical to the stress state of each layer (upper, middle, and lower).

• Composites Research
• /
• 제31권1호
• /
• pp.17-22
• /
• 2018

장섬유 복합재료(Long Fiber Prepreg Sheet; LFPS)는 기존 연속섬유로 구성된 섬유 강화 복합재료에 비해 우수한 생산 효율과 성형성을 가지고 있다. 섬유 강화 복합재료가 타 재료와 혼성으로 사용이 되는 경우 이종 재료의 체결을 위해 접착 방법을 사용하게 되며, 접착부의 강도는 혼성 구조물의 강도를 결정하기 때문에 복합재료 접합부의 설계는 중요하다. 본 연구에서는 동시에 경화된 LFPS와 알루미늄의 접합부를 다양한 표면처리 조건과 온도 및 수분 환경조건에 따른 접착 특성을 평가하였다. 표면처리 기법으로는 기계적인 방법인 연마와 플라즈마 표면처리를 대상으로 하였다. 다양한 표면처리가 적용된 접착 조인트는 단면 겹치기 접착 조인트를 사용하여 실험하였다. 여러 조건들에서 접착 강도가 평가되었고 가장 적절한 조건이 도출되었다.