• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.287-294
• /
• 1994

PAN-based carbon fiber roving and fabric were heat treated at the temperature of $2170^{\circ}C$. Using non-heat treated and heat treated fabric, greenbodies of CFRP and GFRP were manufactured in the Autoclave. After the analysis of heat treated and non-heat treated carbon fiber roving and two types of greenbodies, the variations of physical and mechanical properties of carbon fibers and greenbodies with heat treatment were studied. Observing the cross-section of carbon fiber with SEM, we knew the diameter of carbon fiber was decreased from 6.8gm to 6.4p1. The results of TGA showed that the oxidation resistence was enhanced after heat treatment. The tensile strength of carbon fiber was decreased from (3.11$\pm 0.32)\times 10^3$ MPa to (1.87$\pm 0.26)\times 10^3$MPa, but tensile modulus was increased from (1.94$\pm 0.06)\times 10^5$ MPa to (2.02$\pm 0.11)\times 10^5$MPa after heat treatment. The interlaminar shear strengths of CFRP and GFRP were 148.8$\pm$1.6Mpa and 82.2$\pm$1.1Mpa, respectively. Torch test showed that CFRP was abraded smoothly but GFRP was delaminated.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2002

This study was conducted to reveal the effects of local climatic conditions on the early growth of Korean white pine progeny test stands. For this, stand variables such as mean DBH, mean height, basal area per hectare, and volume per hectare by stand age and locality were first measured and summarized for each stand. Based on these statistics, annual increments for 10 years from stand age 10 to 20 were calculated for each of stand variables. The effects of local climatic conditions as one of environmental factors on the growth were then analyzed by both a topoclimatological method and a spatial statistical technique. From yearly climatic estimates,30 climatic indices which affect the tree growth were computed for each of the progeny test stand. The annual increments were then correlated with and regressed on the climatic indices to examine effects of local climatic conditions on the growth. Gapyung area provided the best conditions for the early growth of Korean white pine and Kwangju area ranked second. On the other hand, the growth pattern in Youngdong ranked last overall as expected. It is also found that the local growth patterns of Korean white pine in juvenile stage were affected by typical weather conditions. The conditions such as low temperature and high relative humidity provide favor environment for the early growth of Korean white pine. Especially, it was concluded that the low temperature is a main factor influencing the early growth of Korean white pine based on the results of correlation analysis and regression equations developed far the prediction of annual increments of stand variables.

• Korean Journal of Food Science and Technology
• /
• v.46 no.6
• /
• pp.710-715
• /
• 2014

To date, the quality and safety of frozen bokbunja have not been clearly assessed. To produce high-quality frozen bokbunja, the optimal freeze-thaw conditions need to be explored. The most popular cultivar (Rubus occidentalis) in Korea was selected for this study. To determine the changes in the quality of frozen R. occidentalis berries, different freezing temperatures were used. The berries were frozen at -20, -45, and $-70^{\circ}C$ immediately after harvest. The drip ratio, hardness, pH, sugar content, color, and anthocyanidin content of the frozen and thawed samples were analyzed. The drip ratio, sugar content, and hardness of the berries correlated significantly with the freezing temperatures. The color and pH of the berries were not significantly affected by the freezing conditions. Frozen leaks between cells reduced significantly with decreasing temperatures. The freeze-thawing process significantly reduced the total aerobic bacteria and inhibited the growth of yeast/mold in the berries to about 2 log scales.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.325-331
• /
• 2016

Computational fluid numerical analysis using the commercial code CFX was performed to develop a Pelton turbine for a pico hydro power generator using the circulating water of a cooling tower in a large building. The performance of the Pelton turbine was examined for different design factors, such as the bucket shape, in which the Pelton wheel was connected in an appropriate manner to the pipe section, and the number of buckets in order to find the optimal design of Pelton turbine for a pico hydro power using surplus water. A benchmark test was carried out on the manufactured small scale Pelton turbine to validate the design method of the Pelton turbine by numerical analysis. The results obtained by comparing the flow characteristics and power output measured using the ultrasonic flowmeter, the pressure transducer and the oscilloscope with the numerical results confirmed the validity of the analytical design method. The possibility of developing Pelton turbines for kW class pico hydro power generators using surplus water with an average circulation velocity of 1.2 m/s for the chosen bucket shape and number of buckets in a 30 m high building was confirmed.

• Explosives and Blasting
• /
• v.38 no.1
• /
• pp.30-37
• /
• 2020

In this study the split ring (SR) test was investigated for its applicability to the measurement of the tensile strength of rock specimen of NX size. The concept of the SR test is the same as the half ring (HR) test (Choi et al., 2019) except that the expected fracture plane is perpendicular to the loading direction. Because of this perpendicularity, however, it was believed that the SR test could be more accurate than the HR test. Like the HR specimen, the SR specimen is a curved prismatic bar with a uniform section. Appealing to a basic bending theory in strength of materials, the tensile strength for the special bar can be calculated analytically. Numerical simulations using LS-DYNA revealed, as expected, that the strength errors were 1% and 5% for the tensional and compressional SR tests, respectively, which were much lower than that (12%) of the HR test. To identify the performance of the two SR tests, laboratory experiments were conducted. The HR and Brazilian tests were also performed for comparison. The experiments showed that the ratios of the tensional and compressional SR to Brazilian strengths were 1.2~1.4 and 1.1~1.2, respectively, which are too small compared to empirical values in ordinary bend tests. Consequently, it is concluded that the SR test is not appropriate for use in tensile strength test of rock specimen of NX size. But the ratio of the HR to Brazilian strengths was within 1.7~2.0 for both the previous and present studies, showing a good consistency in their test results.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.471-475
• /
• 2006

$VO_x$ thin films with the thickness of 450 nm were prepared on a $Pt/Ti/SiO_{2}/Si$ substrate at room temperature by a reactive radio frequency (rf) magnetron sputtering method. The deposition rates of $VO_x$ thin films were investigated as a function of $O_{2}$ concentration and rf power. As the $O_{2}$ concentration in a $O_{2}/Ar$ mixture increased, the deposition rate decreased. However, the deposition rate increased with increasing rf power. The deposited $VO_x$ thin films were annealed at $450^{\circ}C$ for 2, 4, and 6 h in $O_{2}$ and $N_{2}$ ambient. After annealing, the phase changes of $VO_x$ thin films were investigated using X-ray diffraction analysis. The plane and cross-sectional views of $VO_x$ thin films before and after annealing were observed by field emission scanning electron microscopy. The metal-insulator transition (MIT) properties of $VO_x$ thin films were measured using current-voltage measurement. The excellent MIT properties were observed in $VO_x$ thin films annealed in $O_{2}$ ambient.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.28-32
• /
• 2006

This study investigated the variation of flow rates in microchannels that consisted of polydimethyl siloxane (PDMS) and glass using various external voltages. Three different microchannel widths and two different depths. PDMS and negative photoresist (SU-8) were used to make the microchannels by the soft lithographic method. For each depth of microchannel ($50{\mu}m$ and $100{\mu}m$), three different widths ($100{\mu}m$, $200{\mu}m$ and $300{\mu}m$) were made. In each case, several different external voltages were applied (0.3 kV, 0.35 kV, 0.4 kV and 0.45 kV) to examine the flow rates. Our results indicated that flow rate increased with an increase of the external voltage at the same microchannel width. This was because the electrical field was increased as the external voltage increased. For the same external voltage, the flow rate increased as the microchannel's width increased. These results showed that the resistance in the microchannel decreased as the microchannel's width increased. Also, to investigate the effect of microchannel's depth and width, the cross-sectional area of the microchannel was increased to the double in area. As a result, the effect of the microchannel's depth was higher at a low external voltage, and the effect of the microchannel's width was higher at a high external voltage.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.604-609
• /
• 2008

Analyses were conducted to estimate carcass component of yield grade factors by sex and live weight class and to develop the prediction equation of retail product weight by sex in Korean native cattle (Hanwoo). Data from 42,113 Hanwoo carcasses were used to estimate the traits of yield grade factor and an additional 1,066 carcasses were used to develop the prediction equation of retail meat weight. The average of fasting weight of cow, bull and steer were 529 kg, 596 kg, and 634 kg respectively. Carcass weight (CW), backfat thickness (BFT), loineye area (REA), Index score of wholesale meat and yield grade were significantly (p<0.01) affected by sex and live weight. The lean meat percentage, fat percentage and bone percentage based on the weight of cold carcasses were significantly different (p<0.05) between sex groups. The equation of predicting the retail meat product from this study could be expressed as a multiple regression $Y=-4.18+0.63{\times}CW\;(kg)-0.17{\times}BFT\;(cm)+0.16{\times}REA\;(cm^2)$, $R^2=0.93$. Among the independent factors, the BFT was the highest contributor to the prediction equation. Using the equation from this study should allow for rapid, precise and cost-effective assessment of the retail product in Hanwoo beef carcasses.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.5
• /
• pp.11-18
• /
• 2016

The objective of this study was to develop the simple method to estimate ungauged river section for flood stage analysis. Damage prediction should be prioritized using hydrological modeling to reduce flood risk. Mostly, the geographical data using hydrological modeling depends on national river cross-section survey. However because of the lack of measured data, it is difficult to apply to many local streams or small watersheds. For this reason, this study suggest the method to estimate unguaged river cross-section. Simple regression equations were derived and used to estimate river cross-section by analyzing the correlation between the river cross-sectional characteristics (width, height and area). The estimated cross-sections were used to simulate flood level by HEC-RAS (Hydrologic Engineering Center's River Analysis System). The applicability of this method was verified by comparing simulated flood level between measured and estimated cross-section. The water surface elevation of the flood stage analysis was 6.56-7.24 m, 5.33-5.95 m and 6.12-6.75 m for measured cross section, for estimated cross section and for estimated cross section based on DEM elevation, respectively. Further study should consider other factors for more accurate flood stage analysis. This study might be used one of the guidelines to estimate ungauged river section for flood stage analysis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.27-35
• /
• 2007

Stainless steel crowns are invaluable restorative material for the treatment of badly broken down primary teeth in pediatric dentistry. But it is difficult to fit margin because selection of size is not easy and they are not adjusted for Korean children. The purpose of this study was to examine and analyze the marginal adaptation of stainless steel crown of posterior primary tooth. Marginal surface was taken by Fine Pix S602 digital camera and measurements of crown were recorded at 20 points that were randomly selected for marginal gap evaluation by Kappa image base program. 1. Mean marginal gap were large upper 2nd primary molar, lower 1st primary molar, lower 2nd primary molar, upper 1st primary molar in order(p<0.05). 2. Mean marginal surface dimension ratio was more than 20% irrespective of tooth. 3. Largest amount of marginal gap was shown at mesial surface in upper 1st, 2nd primary molar and distolingual surface in lower 1st primary molar, buccal surface in lower 2nd primary molar.