• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.583-592
• /
• 2005

This experiment was conducted to determine the effects of dietary copper levels on performance, carcass characteristics, and economical analysis in Hanwoo steers. Fifteen Hanwoo steers weighing about 300kg were randomly allotted into one of three treatments. The three treatments consisted of Control(7mg Cu/kg feed), TI(12mg Cu/kg feed) and TII(17mg Cu/kg feed). Copper was formulated with concentrate from copper sulfate($CuSO_4$) and animals were fed the diets supplemented with copper from 300kg untill about 630 kg of body weight. Dietary copper levels did not affect daily weight gain, feed intake and feed efficiency during the whole feeding period. Dressing percentage, rib eye area and backfat thickness were not different between animals fed the diets supplemented with copper. Animals fed the diets supplemented with copper received the same B grade in yield grade. Animals fed the diets supplemented with copper received same marbling score. Beef color, fat color, texture and maturity were not affected by Cu supplementation in diet. Animals received the same first grade between treatments in quality grade. Animals fed the diet supplemented with 12mg of copper per kg diet was higher in profit by 13.3% than animals fed the control diet. According to these results, it may be concluded that performance, yield and quality grade were not affected by the Cu levels of 7 to 17mg per kg feed but crude income was enhanced when Hanwoo steers were fed the diet containing 12mg Cu/kg feed.

• Childhood Kidney Diseases
• /
• v.11 no.2
• /
• pp.255-263
• /
• 2007

Purpose : A single center cross sectional retrospective study was performed to compare the outcomes of different peritoneal dialysis(PD) modalities in Korean children. Methods : Among children dialyzed with PD between the year 2004 and 2007, 35 children had reliable data on PD adequacy after 3 to 15 months of dialysis. Subjects were grouped by their modalities; 17, 13 and 5 children were on continuous ambulatory PD(CAPD), continuous cyclic PD(CCPD) and nightly intermittent PD(NIPD), respectively. Body weight and height, number of patients taking anti-hypertensives and laboratory data including biochemical and hemoglobin levels were compared. Dialysis adequacy including weekly Kt/Vurea, creatinine clearance (Ccr) and daily water removal were also compared. Patients were sub-grouped by their peritoneal permeability characteristics. Results : The percentage of patients taking anti-hypertensives, monthly change in Z-scores of body weight and height and laboratory data did not differ among the groups. Patients on CAPD and CCPD showed similar dialysis adequacies. Weekly dialytic Ccr was significantly lower in the NIPD group compared to the others. But total Ccr was not different when residual renal function was added. Weekly dialytic Ccr by CAPD was significantly higher than that of CCPD in low and low-average transporters. Conclusion : We propose that modality can be selected flexibly according to the patients' preferences. And peritoneal permeability characteristics provide valuable information for adjusting PD prescriptions in ultrafiltration failure or in inadequate dialysis. Further study of other clinical performance measures should be performed to clarify the comparable outcomes in different PD modalities.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Journal of the Korean association of regional geographers
• /
• v.5 no.2
• /
• pp.133-142
• /
• 1999

The wetland is very important ecologically as a habitat of diverse organisms. The purpose of this paper is to elucidate the morphogenetic environment of Jilmoe Bog found in the Odae Mountain National Park Jilmoe Bog is located in the high etchplain(1,060m) where Daebo Granite which had intruded in Jura epoch of Mesozoic era has weathered deeply and has uplifted in the Tertiary. The annual mean temperature of study area is $5.3^{\circ}C$, the annual precipitation is 2,888mm. The minimun temperature of the coldest month(january) is below $-30^{\circ}C$ and the depth of frozen soil is over 1.6m. Jilmoe bog consists of a large bog and a small bog. The length of the large bog is 63m and its width is 42m. The basal surface of Jilmoe bog is uneven. Jilmoe bog is a string bog fanned due to frost actions. In String bog, its surface is wavy with stepped dry hills and net-like troughs crossing hill slope. It seems that string bog is related to the permofrost or seasonal permofrost of cold conifer forest(taiga) zone(where the depth of frozen soil is very deep in the least in winters). String bog is a kind of thermokarst that frozen soil thaws differentially locally in declining permofrost and ground surface becomes irregular. There is turf-banked terracette of width $30{\sim}40cm$ in the headwall of small cirque-type nivation hollow formed at footslope of Maebong mountain around Jilmoe bog. This turf-banked terracette is formed by the frost growth of soil water below grass mat in periglacial climate environment. Where water is plentiful such as a nivation follow${\sim}$valley corridor and a headwall of valley, turf patterned grounds of width $30{\sim}50cm$ are found. This turf patterned ground is 'unclassified patterned ground', earth hummock. In conclusion, Jilmoe bog is a string bog of thermokarst that the relief of ground surface is irregular according to locally differentially thawing of permofrost(frozen soil). Jilmoe bog is high moor, its surroundings belongs to periglacial environment that turf-banked terracette and turf patterned ground are fanned actively.

• Korean Journal of Environment and Ecology
• /
• v.19 no.2
• /
• pp.99-105
• /
• 2005

The Mansugol valley forest in Woraksan National Park was studied to investigate forest structure in relation to altitude and part of the slope. Forty eight quadrats were set up in the valley forest along altitude of 380m to 915m and part of the slope, and vegetation analysis for the woody species in the tree and subtree layers were carried out. With increasing elevation belt, tree density and basal area of the tree layer decreased while basal area of the subtree layer increased. As elevation increased, the importance percentages of Quercus mongolica, Fraxinus rhynchophylla, Lindera obtusiloba and Acer mono increased while those of Pinus densiflora, Quercus variablias Quercus serrata and Styrax obassia decreased. Species diversities of the elevation belts including the top of the valley ranged from 0.351 to 0.903, and those of the parts of the slope ranged from 0.780 to 1.064. The range of similarity indices between elevation belts were $36.0\~67.3\%$, and the range of similarity indices between parts of the slope were $66.8\~75.1\%$. According to importance percentage and cluster analysis, the studied valley forest was classified into three forest communities of Pinus densiflora-Quecus species community in the low elevation belt and the middle part of the slope at the middle elevation belt, Quercus mongolica-broad-leaved tree species community in the high elevation belt and the lower and upper parts at the middle elevation belt, and Quercus mongolica community in the top area of the valley. The importace percentage of Quercus mongolica was significantly and negatively correlated with those of Pinus desiflora and Quercus serrata. There were significantly positive correlation among Pinus densiflora, Quercuss serata and Rhus trichocarpa.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.761-778
• /
• 2017

The need of the underground space for the infrastructures in urban area is increasing, and especially the demand for shallow tunnels increased drastically. It is very important that the shallow tunnel in the urban area should fulfill not only its own safety conditions but also the safety condition for the adjacent structures and the surrounding sub-structure. Most of the studies on the behavior of shallow tunnels concentrated only on their behaviors due to the local deformation of the tunnel, such as tunnel crown or tunnel sidewall. However, few studies have been performed for the behavior of the shallow tunnel due to the deformation of the entire tunnel. Therefore, in this study the behavior of the surrounding ground and the stability caused by deformation of the whole tunnel were studied. For that purpose, model tests were performed for the various ground surface slopes and the cover depth of the tunnel. The model tunnel (width 300 mm, height 200 mm) could be simulationally deformed in the vertical and horizontal direction. The model ground was built by using carbon rods of three types (4 mm, 6 mm, 8 mm), in various surface slopes and cover depth of the tunnel. The subsidence of ground surface, the load on the tunnel crown and the sidewall, and the transferred load near tunnel were measured. As results, the ground surface subsided above the tunnel, and its amount decreased as the distance from the tunnel increased. The influence of a tunnel ceased in a certain distance from the tunnel. At the inclined ground surface, the wider subsidence has been occurred. The loads on the crown and the sidewall were clearly visible, but there was no effect of the surface slope at a certain depth. The load transfer on the adjacent ground was larger when the cover depth (on the horizontal surface) was lager. The higher the level (on the inclined surface), the wider and smaller it appeared. On the shallow tunnel under inclined surface, the transfer of the ambient load on the tunnel sidewall (low side) was clearly visible.

• Journal of agricultural medicine and community health
• /
• v.38 no.1
• /
• pp.1-13
• /
• 2013

Objectives: This study is to investigate the prevalence and related factors of metabolic syndrome among Korean adults aged 20 years and above. Methods: From the database of the $5^{th}$ Korea National Health and Nutrition Examination Survey (KNHANES V) conducted in 2010, data of 5,670 adults who responded to all the questionnaires of health interview and had metabolic syndrome in the health examination were included in this analysis. SAS 9.2 was used for statistical analysis with complex sample survey modules and commands. Results: The prevalence rate of metabolic syndrome based on the criteria proposed by International Diabetes Federation (IDF) was 18.8%. The prevalence of metabolic syndrome in each group was: 20.7% of women, 43.1% among elderly over 70 years old, 40.6% of the divorced or the separated, 27.6% of recipients of economic support from the government, 23.6% of people who had alcohol dependency problem, and 43.7% of overweight or obese adults. Independent risk factors based on the multiple logistic regression analysis revealed that prevalence of metabolic syndrome was associated with female (odds ratio 1.59 [95% confidence interval 1.20-2.11]), age (50s 3.95 [2.11-7.37], 60s 5.62 [2.98-10.61], 70s 10.56 [5.25-21.25]), high school education (0.52 [0.37-0.74]), clerk occupation (2.14 [1.27-3.60]), divorced marital status (1.72 [1.15-2.59]), alcohol dependency (1.86 [1.16-2.98]), higher BMI (14.08 [10.60-18.70]). Conclusions: The metabolic syndrome is prevalent among Korean adult population according to IDF criteria. Several demographic characteristics and potentially modifiable factors are associated with metabolic syndrome. Identification of this high-risk group and management of these modifiable factors are warranted to reduce the prevalence of metabolic syndrome.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.113-118
• /
• 2010

Due to diverse soil-forming environments and different purposes of the soil classification, numerous soil classification systems have been developed worldwide. The World Reference Base for Soil Resources (WRB) and the Soil Taxonomy of the United States are well-known in Korea. However, the German Soil Systematics based on somewhat different principles from the two former systems is little-known. The objective of this paper is therefore to give a short overview of the principles of the German Soil Systematics. The German Soil Systematics consists of a six-level hierarchical structure which comprises soil divisions, soil classes, soil types, soil subtypes, soil varieties, and soil subvarieties. Soils in Germany are firstly classified into one of four soil divisions according to the soil moist regime: terrestrial soils, semi-terrestrial soils, semi-subhydric/subhydric soils, and peats. Terrestrial soils are subdivided into 13 soil classes based on the stage of soil formation and the horizon differentiation. Semi-terrestrial soils are differentiated into four classes regarding the source of soil moist: groundwater, freshwater, saltwater, and seaside. Semi-subhydric/subhydric soils are subdivided into two classes: semi-subhydric and subhydric soils. Peats are classified into two classes of natural and anthropogenic origins. Classes can be compared to orders of the U.S. Taxonomy. Classes are subdivided into 29 soil types with regard to soil forming-processes for terrestrial soils, into 17 types with regard to the soil formation for semi-terrestrial soils, into five types with regard to the content of organic matter for semi-subhydric/subhydric soils, and also into five types with regard to peat-forming processes for peats. The soil mapping units in Germany are types, which can be additionally subdivided into ca. 220 subtypes, several thousands of varieties and subvarieties using detailed nuances of morphologic features of soil profile. Soil types can be compared to great groups of the U.S. Taxonomy.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.4
• /
• pp.392-398
• /
• 2005

Background : The last national tuberculosis survey was carried out in 1995. In 2000, the KTBS(Korean Tuberculosis Surveillance System) replaced a previous national survey. However, the KTBS does not show some of the important epidemiological indexes such as the prevalence of positive tuberculosis or the drug resistance rate. The aim of this study was to compare the clinical features of pulmonary tuberculosis patients admitted to a national tuberculosis hospital in 1995 and 2002. From this study, the authors expect to estimate the trend of the clinical features of tuberculosis in Korea even though it can not represent the Korean tuberculosis situation as a whole. Method : A cross sectional analysis of the clinical features for 331 pulmonary tuberculosis in-patients admitted to the National Masan Tuberculosis Hospital as of Dec. 2002, was carried out and these results were compared with those reported in 1995. Results : In comparison with the data reported in 1995, the mean age was increased by 3.6 years ($44.1{\pm}14.6$ vs $47.7{\pm}16.4$, p<0.01). The number of past tuberculosis history and used anti-tuberculous drugs prior to admission decreased from $2.0{\pm}1.7$ and $6.1{\pm}2.3$ to $1.7{\pm}1.8$ and $4.6{\pm}3.6$(p<0.05, p<0.001), respectively. While the resistance rate for anti-tuberculous drugs was similar (81.0% vs 77.6%), the initial resistance rate(10.5% vs 21.4%) and initial MDR rate(2.4% vs 16.5%) increased significantly(p=0.012, p=0.001, respectively). In 1995, the public health communities were in charge of approximately 65% of newly diagnosed tuberculosis cases, but this reduced to 40.5% in 2002(p<0.001). Conclusion : The existing national TB program (NTP) needs to be revised and strengthened in order to cope with the unfavorably changing situation of the domestic TB problem because the number of TB patients has not decreased and the initial resistance rate has increased greatly. Furthermore, the public and private sectors should cooperate each other to control the TB problem effectively because the private sector is now managing more than half of the TB patients.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.509-516
• /
• 2005

For the purpose of comparing the bond strengths of compomers to composite resin, composite Z250, and two polyacid modified composite resin, Dyract AP and F2000, were selected and investigated using universal testing machine for measuring the shear bond strengths. Additionally, the failure modes were examined by observing the fractured surfaces of each specimen. The following results were obtained. 1. The shear bond strength of Dyract AP to Z250 were higher than those of F2000, but there was no statistically significant difference between group 1 and group 3(p>0.05), and groups using fresh compomers showed higher bond strength than those using aged compomers(p<0.05). 2. After measuring the shear bond strength of each group, it was highest in group 5 and was lowest in group 9(p<0.05). 3. Although there was no statistically significant difference, groups treated with thermocycling showed lower bond strengths than those of non-thermocycling groups. 4. Overall compomer/composite resin failures were adhesive. Cohesive failures occurred mainly in groups using bonding agent. Based on these results, the application of a bonding agent on fresh polyacid-modified resin composite increases the bond strength between polyacid-modified resin composite and composite resin. Additionally, the surface of aged polyacid-modified resin composite has to be roughened mechanically and a bonding agent has to be used in combination with composite resin.