• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1447-1453
• /
• 2010

In this paper, the design and the fabrication of dual-band bandpass filter using two dual-mode resonators is presented. Dual-mode resonator using a short stub is miniaturized by inter-digital capacitor and stepped impedance. Two dual mode resonators are designed to have different resonant frequencies, one for the lower passband and the other for the upper passband. Transmission zero is positioned at low or high rejection bands with a sharp skirt characteristic. Dual-band operation can be achieved using dual feeding structure. For WLAN, the proposed filter at 2.45/5.25 GHz is designed and fabricated. The size of the filter is as compact as 1$10.83\;mm{\times}5.3\;mm$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1123-1133
• /
• 1999

In this paper, we applied mode matching and generalized scattering matrix methods to three plane mode matching method for analyzing T-junctions. We calculated all scattering matrix elements by only three times and considered several incident modes. By proposed analysis method, we could analyze various waveguide discontinuity structures more conveniently and accurately. Using the stepped T-junction, we would be able to reduce the reflection coefficient at an input port and use it over wider band. Simulated and HFSS data of T-junctions are compared, showing good agreement for scattering matrix elements. Considering step numbers, height, length and position, we extracted for optimum dimensions and equivalent circuit parameters.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.5
• /
• pp.39-45
• /
• 1978

This paper described on the varactor tuning Gunn oscillator for X band. Analyzed the coplanar 2 post case using the dyadic Green's function then derived the obstacle network for the incident TE10 mode. For the electronical tuning, used the tuning varactor diode which has a high speed dynamic response characteristic and high Q. Oscillation frequency, switching mode, and stable oscillation point were calculated by the computer simulation. In the expriments, switching mode was occurred at 18 mm, 32.5 mm of the short tcircuit position, respectively. The general characteristics of the varactor tuning Gunn oscillator were abruptly changed by the moving of the short circuit and the variation of the bias voltage.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.85-91
• /
• 2009

This paper proposes a simulation method of the internal winding fault to calculate the short-circuit current, electromagnetic force and vibration mode in a distribution power transformer by using FEM program(FLUX2D) and analytic algorithm. A usage of the Transfer matrix method is also presented for the vibration mode analysis of the cable-type winding of power transformer. The equations of the winding are approximated by the series expansions of the distributed mass mode and Timoshenko's beam theory. The simulation examples are provided for the cable type winding of the transformer(22.9[kV]/220[V], 1,000[kVA]) to verify the method. The proposed Transfer Matrix Method is also verified by the ANSYS program for the vibration mode of the transformer winding. The method presented may serve as one of the useful tools in the electromagnetic force and vibration analysis of the transformer winding under the short circuit condition.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.57-62
• /
• 2023

This paper proposes a tri-band bandpass filter using dual-mode stepped-impedance resonators (SIRs) with parallel coupled structures. The proposed filter adopts U-shaped SIRs with open stubs and parallel coupled lines (PCLs) that have inter-digital and comb-line shorted ends. Two U-shaped SIRs with open stubs build the first and third passband, and the central PCL resonators build the second passband. Five resonators and coupling structures are theoretically analyzed to derive the scattering parameters of the proposed filter. A novel tri-band bandpass filter is designed and fabricated using the induced scattering parameters. The measured result of the fabricated tri-band bandpass filter shows a good agreement with the simulated one.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.227-227
• /
• 2003

캐패시터, 인덕터 등의 전자부품들은 적층기술 및 표면 실장 기술 등을 이용하여 적층형 칩형태로 제작되고 있다. 적층형 칩형태의 전자부품들은 전자기적 특성을 부여하는 세라믹스와 전극역할을 하는 금속으로 구성되어 있으며, 전극 부분은 크게 내부전극과 외부전극으로 구분된다. 고장이 발생하게 되면 고장의 형태를 의미하는 고장모드(failure mode)와 제품을 고장에 이르게하는 물리, 화학적, 기계적 과정을 의미하는 고장기구(failure mechanism)을 조사하게 된다. 전자부품에서 고장이 발생하였을 경우, 1차적인 분석대상은 전극재인데 전극재에 기인한 고장으로는 세라믹스와 전극재 사이의 열팽창계수 차이에 기인한 박리현상(Delamination), 인쇄불량에 의한 단락 및 두께 불량, 세라믹스와 전극재 사이의 반응, 산화에 의한 부식 등이 있다. 이러한 고장은 급격한 주위 환경의 변화에 의한 것보다는 일정수준의 스트레스가 축적되어 발생하며, 수명을 예측하기 위해서는 고장의 원인을 규명하고 그 원인에 의한 가속 시험을 수행하는 것이 일반적인 방법이다. 본 연구에서는 Ag 외부 전극재의 수명을 예측하고자 가속시험을 수행하였고, 고장 분석 통하여 Ag외부 전극재의 특성 및 문제점 등을 정확히 파악하기 위한 연구를 하였다.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.83-85
• /
• 2008

본 논문은 변압기의 대부분 고장원인이 되는 권선 간의 단자 시 발생하는 진동을 수치적으로 계산하고 전자력 계산을 위한 방법으로 Pseudospectral Method을 적용하여 단락권선사이의 강제진동해석을 수행하였다. 나선형권선의 방정식은 Chebyshev다항식 시리즈의 확장과 Gauss-Lobatto collocation 과정을 수행되어진다. 알고리즘 검증을 위하여 22.9kV/220V, 1000kVA 용량의 케이블 타입의 변압기의 FEM 시물레이션 결과와 이론적 수치적계산과 함께 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.91-92
• /
• 2007

본 연구에서는 전력계통에서 발생되는 surge나 고장전류에 의해서 변압기의 고압측 코일에 유도되는 전자력의 크기를 유한요소 전자계해석 프로그램(FLUX2D)의 축대칭FEM을 이용하여 해석하였다. 1MVA, 22900/220(V) 단상 외철형 Cable형 변압기의 권선의 각방향의 전자력을 분석하고, 변압기 권선의 고유진동mode를 Transfer Matrix Method를 이용하여 Cable형권선의 고유진동주파수를 파악하고 ANSYS와 비교하였다. 변압기 권선의 전자력과 진동mode 분석결과는 변압기의 절연설계 및 단락기계력에 대한 프레임 구조 설계를 위한 자료로 활용될 수 있다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1186-1192
• /
• 2016

This paper proposes techniques to diagnose short-circuit faults of both the diodes and power FET in switching mode power supply (SMPS) by using a simple analog tester. The diodes in full-bridge rectifier, power FET, switching transformer, and some sensors are modelled with resistor. The total resistance value measured at the input terminal of a SMPS is analyzed when the short-circuit faults of diodes in a full bridge rectifier or power FET are occurred. The short-circuit faults of one or two diodes in a full bridge rectifier, power FET, and both the diodes in a full bridge rectifier and power FET can be detected by a range of total resistance, which is measured by the analog tester. Through experiments, the theoretical analysis for total resistance under short-circuit faults can be verified.

• Journal of Welding and Joining
• /
• v.9 no.2
• /
• pp.20-28
• /
• 1991

The main subject of this study is the construction of an automatic welding system that has the capability to trace the weld seam in GMA welding of lap joints. The system was composed of a vision sensor, moving torch, and personal computer(IBM-PC). In the developed vision sensor, an image was captured by the frame grabber at the time of short circuit during welding. The threshold method was adopted for determining the structured light and the central difference method for detecting the weld joint. And the seam tracing of the torch was performed by using the data regeneration algorithm. In this system using the image at the time of short circuit, weld seam tracking was performed without any relations to arc light and spatters.