• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.385-389
• /
• 1998

In this paper, we propose an optical correlator system using volume holograms for database of matched filters. Optical correlator has high speed and parallel processing characteristics of optics. Matched filters are recorded into a volume hologram that can store data with high density, transfer them with high speed, and select a randomly chosen data element. The multiple reference images of database are prerecorded in a photorefractive crystal in the form of Fourier transform images, simply by passing the image displayed in a spatial light modulator through a Fourier transform lens. The angular multiplexing method for multiple holograms of database can be achieved by rotating the crystal by use of a step motor. Experimental results show that the proposed system can be used for the fingerprint recognition.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.142-151
• /
• 1993

An intelligent mulitiple monitoring system to monitor tool/machining states synthetically was proposed and developed. It consists of 2 fundamental subsystems : the multiple sensor detection unit and the intellignet integrated diagnosis unit. Three signals, that is, spindle motor current, Z-axis motor current, and machining sound were adopted to detect tool/machining states more reliably. Based on the multiple sensor information, the diagnosis unit judges either tool breakage or degree of tool wear state using fuzzy reasoning. Tool breakage is diagnosed by the level of spindle/z-axis motor current. Tool wear is diagnosed by both the result of fuzzy pattern recognition for motor currents and the result of pattern matching for machining sound. Fuzzy c-means algorithm was used for fuzzy pattern recognition. Experiments carried out for drill operation in the machining center have shown that the developed system monitors abnormal drill/states drilling very reliably.

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.204-210
• /
• 1999

We propose an optical fingerprint identification system using volume hologram for database of matched filter. Matched filters in VanderLugt correlator are recorded into a volume hologram that can store data with high density, transfer them with high speed, and select a randomly chosen data element. The multiple reference fingerprint photographs of database are prerecorded in a photorefractive material in the form of Fourier transform images, simply by passing the image displayed in a spatial light modulator through a Fourier transform lens. The angular multiplexing method for multiple holograms of database is achieved by controlling the reference directions with a step motor. Experimental results show that the proposed system can be used for secure entry systems to identify individuals for access to a restricted area, security verification of credit cards, passports, and other IDs.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.200-202
• /
• 2004

This paper deals with the real-time monitoring and control system using PC, PDA(Win CE embedded device) and PCS(based BREW platform). The camera attached to the server captures the moving target, and the captured frame of color image is encoded in JPEG for image compression at the server. The client(PC, PDA, PCS) receives the image data from the remote server and the received image is decoded from decompression. We use the TCP/IP protocol to send the image frames. The client can control the position of the camera by sending the control command to the server. Two DC servo motors for the camera are controlled in any directions, up-down and left-right, by the controller which is communicating with the server via the serial communication to get the control command. In this way, on the client we can monitor the moving images at the server and also control the position of the camera.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2386-2388
• /
• 2004

Recently, rapid process of network technology has an effect on the field of control engineering. And it gives effect to network control system(NCS) research that grafts existing control system and network has been studied. According to one-chip development of TCP/IP that is the most useful in LAN server for hardware, it can usefully and conveniently apply to network control system before. This paper construct network control system that can work close-loop control takes advantage of Ethernet that is the most for general data transmission network. Here, protocol uses for data transmission makes use for TCP/IP. This work the basic data transmitter-receive experiment to take advantage of network node was produced. And then, DC-motor can be control plant. Finally, I will prove to build speed control system of multiple DC-motor through Ethernet.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.6
• /
• pp.339-346
• /
• 2019

Multi-axis servo systems are widely used in various fields such as industiral systems for improving production efficiency, robotics and complex systems where many mechanical devices and sensor systems are connected. Such a servo system requires that the servo control technique to realize the synchronization of the drive shaft in the steady state and transient conditions and to control so as to follow the target track in order to improve product precision and production efficiency. In addition, embedded type hardware is required for smooth control of the entire multi-axis system. Therefore, this paper uses hardware based on FPGA which is widely used in digital signal processing field and various control system because hardware design change is easy and parallel processing is possible. In addition, Labview based servo motor control program was studied that can control the servo motor by ensuring the performance and flexibility of the FPGA and follow the target trajectory according to various speed processing and accurate timing synchronization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.216-222
• /
• 1992

현재의 가공 시스템에 있어서 가공 작업자체는 NC 공작기계, 머시닝 센터등에의해 자동적으로이루어 지고있으나, 작업 상태에 대한 감시 및 공구교환 시기의 결정은 주로 숙련된 작업자에 의해이루어 지고 있으므로완전 자동화, 무 인화에 큰장애가 되고 있다. 특히 공구 파손 및 공구 마멸에 대한 감시는 공구 교환 시점의 자동결정 뿐 아니라 가공 시스템의 무인 운전을 위해서 필수적인 것으로, 기계 정지 시간(down time)을 줄일 수 있고, 제품의 정밀도를 높일 수 있다. 본 연구에서는 이를 위한 기초 연구로, 가공상태를 나타내는 감시신호로 AC 주축 모터 전류와 주축대진동 신호 를 선정하여 엔드밀 공구와 드릴 공구를 이용한 작업에서의 공구 상태변화에 따른 감시신호의 성능을 조사하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.258-258
• /
• 2000

In this paper, we present the position control of pendulum system which is driven by a ultrasonic motor. Since the system's response is different for each initial position of pendulum, it is difficult to obtain the satisfiable control performance by using a neural network which is learned by off-line. To overcome this problem, we propose the multiple controller based on fuzzy inference system for ultrasonic motor. and controller is designed by neural network. The proposed method shows good performance for any initial positions and it's effectiveness is verified from experiments. We expect that ultrasonic motor can be used as actuators of robot's leg or manipulator.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.50-54
• /
• 2015

구형무인비행체는 다중 모터를 이용한 무인항공기에 비행 소형화, 경량화, 경제화 등의 장점을 가지고 있다. 본 논문에서는 구형무인비행체의 경로 추종을 위한 제어기 설계 및 성능에 대한 내용을 다루고 있다. 먼저 구형무인비행체의 운동방정식이 제어기 설계를 위해 유도되었고, 유도된 운동방정식을 이용해 경로 추종 제어기를 설계하였다. 구형무인비행체의 자세제어는 무게중심을 변화하는 방법을 사용하였다. 요구 경로를 설정하여 설계된 제어기의 경로 추종 성능을 MATLAB 시뮬레이션을 통해 확인하였다. 시뮬레이션 결과, 제시된 제어기가 설정된 경로를 추종하고 있음을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.183-188
• /
• 2001

In this paper, we have developed a new Force-Display system using tendon-driven method based multiple DC motors. The proposed system is based on the HIR Lab Haptic library, which calculates the real position and renders the reflecting force data to device rapidly. The system is composed of device based tendon- driving method, high-speed controller and Haptic rendering library. The developed system will be used on constructing the dynamical virtual environment. To show the efficiency of our system, we designed simulation program, which an display the moving force (attaching, grabbing, rotating) on two virtual points. As the result of the experiment, our proposed system shows much higher resolution than any others.