• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1077-1083
• /
• 2015

In this paper, we introduce an energy-efficient opportunistic interference alignment (OIA) scheme that greatly improves the sum-rates in multi-cell uplink networks. Each user employs optimal transmit vector design and power control in the sense of minimizing the amount of generated interference to other-cell base stations while satisfying a required signal quality. As our main result, it is shown that owing to the reduced interference level, the proposed OIA schemes attains larger sum-rates than those of OIA with no power control for almost all signal-to-noise ratio regions. In addition, when both zero-forcing and minimum mean square error (MMSE) detectors are employed at the receiver along with the OIA scheme, it is shown that the OIA scheme with MMSE detection shows superior performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.617-626
• /
• 2008

Opportunistic Beamforming (OBF) offers a way to provide the multiuser diversity even in slow fading channel by using randomly generated beam weights, leading to the substantially reduced feedback in the form of the instantaneous SNR from users. In spite of the advantage of the reduced feedback, the imperfect channel estimation might influence the quality of the estimated SNR and channel scheduler so bad that the selected AMC level would be higher than the achievable rate of the actual channel, resulting the corruption of transmitted packet. In this paper, we propose a conservative link adaptation, where the estimated SNR is scaled down by a conservative factor which minimizes the variance of the maximum difference between the actual channel SNR and the resultant SNR. To support the proposed scheme, we analyze the statistics of the difference of the channel SNR and the estimated SNR. Simulation results show that the introduction of conservative factor achieves more than two-fold performance improvement in the presence of channel estimation error and the fairness of PF scheduler is maintained when the least squared channel estimator is applied.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.3
• /
• pp.25-31
• /
• 2007

Current computer graphics technology creates and displays virtual objects in a normalized environment. We cannot know or assume the real physical properties of objects related to appearance without textual information. It is also difficult to represent any two objects in relation to each other when the difference between the two objects' size is large because of the limited resolution of the computer display. In order to solve the problem, we define and implement the real length property among the physical properties in virtual environments. We define the concept of LOLD (Level of Length Detail) to represent real-world length for objects in metric units such as millimeter, meter, kilometer, etc.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2000

We propose a predistorter to compensate for nolinear distortion induced by a high power amplifier employed in multi carrier-code division multiple access (MC-CDMA) systems. The proposed scheme rests upon the fixed point iteration (FPI) associated with the contraction mapping theorem. Unlike the predistorter based on the FPI already presented by the authors in other literatures which operates on complex-valued modulation signals, the proposed predistorter in this paper deals with real-valued FPI on modulation signal amplitudes, resulting in less complexity. Simulation results on a BPSK-modulated, 64-subcarrier synchronous MC-CDMA baseband system with a traveling wave tube amplifier in the transmitter, indicate that the proposed predistorter achieves significant improvement in terms of bit error rate and total degradation over those without the predistorter. Moreover, the proposed predistorter outperforms the complex-valued counterpart, in particular, for small output back-off levels.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2000

In this paper, we proposed an algorithm that used a direct method to set an initial value of Broydon-Fletcher-Goldfarb-Shanno(BFGS) method and, accordingly, conducted an experiment in optimal directivity synthesis of adaptive ultrasonic transducer by point source array. To certify the efficiency of this method, quasi-ideal beam with arbitrary beam width, rotating beam, and multi beam, all with the limited side lobe level -30dB, were chosen to check the problem of directivity synthesis that was formed by point source array in the second dimensional sound field. The numerical calculation results showed that the proposed method performed the directivity synthesis faster than the BFGS method did. In addition, the proposed method showed a good error correction for directivity synthesis, and did not demand the choice of initial value. Finally, it is also shown that the proposed method can be used for the adaptive control that was not possible with the direct method alone.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.755-761
• /
• 2013

Medium access control (MAC) protocols for wireless sensor networks make sensor nodes on state for energy-efficiency only when necessary. In this paper we present an energy efficient priority-based MAC protocol for energy-harvesting Wireless Sensor Networks (WSNs). For support priority-based packet transmission the proposed EEPB-MAC protocol uses the modified IEEE 802.15.4 beacon frames including priority bit, sender node address, and NAV value fields. A receiver node periodically wakes up, receives sender beacon frames, selects data sending sender, and broadcasts a beacon frame containing the selected sender's address. A receiver node selects sender node according to sender's data priority. A receiver nodes also adjust wake up period based on their energy states. Hence, the energy consumption of receiver node can be minimized. Through simulations and analytical analysis, we evaluate the performance of our proposed the EEPB-MAC protocol and compare it against the previous MACs. Results have shown that our protocol outperforms other MAC in terms of energy consumption, higher priority packet delivery delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.965-973
• /
• 2007

We analyzed that the loss of data in TCP protocol based wireless networks caused by overlapped responses in bi-directional nodes that were resulted in out of the data sequence. This loss can be prevented by using revised TCP rate control algorithm and the performance of throughput can also be improved. The rate control algorithm is applied when the congestion happens between nodes while traffic packets are retransmitting in TCP bandwidth. In addition to applying the rate control algorithm, we determine the number of system clients in bandwidth and the average of pausing time between transmitting serial files to produce a competitive level so that an efficient performance of rapid retransmitting for the loss of multi-packets. This paper discusses the improvement of congestion control in that the decrease of the loss, firstly, as ensuring an efficient connection rate and, secondly, as using sliding window flow control.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.87-94
• /
• 2007

Imbalances in focus, luminance and color between stereo Pairs could cause disparity vector estimation error and increment of transmission data. If the distribution of errors in residual image is large, it may influence to lowering of compression performance. Therefore, in this paper, we propose an efficient balancing method between stereo pairs to reduce the effect. For this, we registrated stereo images using a FFT based method to consider the pixels in the occluded region, we eliminated the pixels of blocks which has large error of disparity vector estimation in balancing function estimation. The balancing function has estimated using histogram specification, local information of target image and residual image between stereo images. Experiments show that the proposed method is effective in error distribution, PSNR and disparity vector estimation. We expect that our method can be improving compression efficiency in stereo coding system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.477-485
• /
• 2002

In this paper, we present an efficient hardware architecture for the H.263 video codec and its VLSI implementation. This architecture is based on the unified interface by which internal hardware engines and an internal RISC processor are connected one another. The unified interface enables the modular design of internal blocks, efficient hardware/software partitioning, and pipelined paralled operations. The developed VLSI supports the H.263 version 2 profile 3 @ level 10, and moreover, both the control protocol H.245 and the multiplexing protocol H.223. Therefore, it can be used for the complete ITU-T H.324 or 3GPP 3G 324M multimedia processor with the help of an external audio codec. Simultaneous encoding and decoding of QCIF format images at a rate greater than 15 frames per second is achieved at 40 MHz clock frequency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.24-31
• /
• 2007

DVB-T (Digital Video Broadcasting-Terrestrial) is an important multimedia broadcasting technology capable of high data-rate transmission and adopted by Europe. OFDM (Orthogonal Frequency Division Multiplexing) is the backbone technique employed in DVB-T to support multimedia services that have various bandwidths. Unfortunately, an OFDM signal has a large PAPR (Peak-to-Average Power Ratio). In this paper, we investigate the performance of a simple PAPR reduction scheme for the DVB-T system, which requires no change of a receiver structure or no additional information transmission. The approach we employed is clipping in the time and frequency domains. The time-domain clipping is carried out with a predetermined clipping level while the frequency-domain clipping is done within EVM (Error Vector Magnitude). This approach is suboptimal with lower computational complexity compared to the optimal method. The simulation results demonstrate that the proposed one is getting more effective at lower modulation levels and with more allowed constellation error.