• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.1-10
• /
• 2000

A rigorous modeling of ultra-low energy implantation is becoming increasingly more important as devices shrink to deep submicron dimensions. In this paper, we have developed an efficient three-dimensional Monte Carlo ion implantation model based on a modified Binary Collision Approximation(BCA). To this purpose, the modified electronic stopping model and the multi-body collision model have been taken into account in this simulator. The dopant and damage profiles show very good agreement with SIMS(Secondary Ion Mass Spectroscopy) data and RBS(Rutherford Backscattering Spectroscopy) data, respectively. Moreover, the ion distribution replica method has been implemented into the model to get a computational efficiency in a 3D simulation, and we have calculated the 3D Monte Carlo simulation into the topographically complex structure.

• Journal of the Korean Chemical Society
• /
• v.38 no.3
• /
• pp.221-223
• /
• 1994

We tried to apply the linear solvation energy comparison method to solute retention in normal phase liquid chromatography. Correlation coefficients of regression of lnk' collected in a fixed eluent against solute polarity indices have proven to be lower than those obtained from reversed phase liquid chromatography data. This event can be attributed to complexity of solute retention process in normal phase liquid chromatography. We concluded from the regression results that each specific polarity of the stationary phase is greater than that of the mobile phase and that the difference in each polarity between the stationary phase and the mobile phase decreases as the volume fraction(${\phi}$) of the more polar solvent in the mobile phase increases. Correlations of lnk' of a single solute against solvent polarity indices have proven to be meaningless owing to covariance among the solvent polarity indices. Instead, a good linear relationship between lnk' and solvent ${\pi}^*$ was observed, and its linearity is better than that between lnk' and ${\phi}$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.453-453
• /
• 2013

유기 태양전지는 저비용으로 제작이 가능하고 제작이 용이한 장점을 가지고 있으므로 많은 그룹에서 관심을 가지고 있다. 정공 수송층으로 사용되는 PEDOT:PSS는 많이 사용되지만 강한 산성 특성 때문에 ITO 전극에 식각이 되므로 문제가 있다. 그러므로 산화물 반도체 $WO_3$, $MoO_3$, 그리고 $V_2O_3$ 등이 태양전지에 많이 만들어지고 있다. 특히 copper oxide는 높은 광흡수율을 가지고 있으므로 태양전지에 사용하는 데 많은 기대되는 물질이다. Copper oxide 박막은 열증착 법, 스프레이 필로시스, 전기화학 증착, 화학증착법, 그리고 솔-젤법 등 다양한 증착 방법이 있다. 넓은 면적의 소자를 제작할 경우 솔-젤 방법은 기존의 증착법에 비해 낮은 비용으로 제작, 높은 성장율, 그리고 높은 기계적 탄력성의 장점이 있다. 솔-젤법으로 만든 copper oxide는 P3HT의 HOMO (high occupied molecular orbital)와 비슷한 위치에 접하고 있으므로 정공수송층으로 적합하다. 본 연구에서 제작된 태양전지의 구조는 ITO/P3HT:PCBM/CuxO로 구성되어 있다. ITO가 $10{\Omega}$/sq의비저항을 가지고 있었고 UV 처리를 하였다. 그 위에 P3HT:PCBM (1:0.8 weight)를 스핀 코팅하였다. 마지막으로 0.1 M $Cu_xO$용액은 Cu (II) acetate monohydrate를 소스로 2-methoxyethanol ($C_3H_8O_2$)의 용제와 안정제로 monoethanolamine ($C_2H_7NO$)을 섞어서 만들었다. 그리고 P3HT:PCBM 위에 스핀 코팅하였고 열증착 방법으로 전극인 Ag 을 증착하여 최종 소자를 만들었다. Cu(II) acetate의 소스로 제작된 박막의 투과율 측정을 통해 에너지 밴드갭을 구할 수 있었다. Copper oxide 박막은 다결정구조 이므로 다중 밴드갭으로 구성되어지는 것을 알 수 있었다. 최종적으로 만들어진 소자를 열처리를 통해 소자 특성을 조사했더니 250도에서 가장 좋은 결과를 얻을 수 있었다.

• Journal of the Korean Society of Radiology
• /
• v.82 no.1
• /
• pp.173-181
• /
• 2021

Purpose To evaluate the ability of the Hounsfield unit (HU) measurement of the femoral neck during multidetector computed tomography (MDCT) for assessing osteoporosis compared with dual-energy X-ray absorptiometry (DXA). Materials and Methods Forty-two patients with femoral neck fractures who underwent MDCT and DXA from July to December 2016 were included in this study. HU measurements were made of the cancellous portions of the normal contralateral femoral neck on MDCT. Bone mineral density (BMD) and T-scores were obtained at the femur DXA. Correlations of HU values with BMD and T-scores were analyzed using Spearman's correlation test. Results The mean BMD and T-score of the femoral neck were 0.650 g/cm² and -2.4, respectively. The mean HU values for the normal, osteopenia, and osteoporosis groups were 131.9, 98.9, and 41.3, respectively. HU values at the femoral neck were positively correlated with BMD (r² = 0.670; p < 0.001) and T-scores (r² = 0.676; p < 0.001). Conclusion The HU values of the femoral neck on MDCT are significantly correlated with BMD and T-scores of femur DXA. The HU values may serve as a diagnostic tool for the screening of regional bone quality when MDCT is performed for other reasons.

• Journal of the Korean Society of Radiology
• /
• v.5 no.1
• /
• pp.27-35
• /
• 2011

The purpose of this study is to examine factors that affect the bone mineral density of pre-menopause women by using the dual energy x-ray absorptionmetry, ultimately contributing to preventing women's osteoporosis that tends to be aggravated since menopause. Out of the subjects, 20.2% were suffering osteopenia. Age was found most important in estimating the level of bone mineral density. Meanwhile, the older women were, the significantly lower their bone mineral density was. It was found that taking exercise has a more positive effect on boss mineral density than not taking. Exercising in a suitable amount was helping women keep their bone mineral density better. Preferring meat to vegetarian diets were significantly affecting women's bone mineral density. Meanwhile, it was found that the shorter menstrual cycle is, the significantly lower bone mineral density is. A multi=regression analysis of bone mineral density and its related factors showed that the older women were, the significantly lower their bone mineral density was. In other words, age was found as the most risk factor of osteoporosis.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.4 s.59
• /
• pp.729-740
• /
• 1997

To determine the relationship between hypertension and nutrient intake cross-sectional study were performed in a rural area. Adult resident over 30-year-old age were measured blood pressure and body mass index(BMI), and interviewed about food in-take for the previous 24 hours. 250 men and 297 women participated the survey. Significant correlation was showen in men between mean systolic blood pressure and protein density. Significant correlation with mean diastolic blood pressure was showen on protein density, protein energy(%), calcium density and energy-adjusted protein in men. We analysed risk factor for hypertension adjust the effect of age, BMI, sex and family history by multiple logistic regression. Protein density(odds ratio=3.18), fat density(odds ratio=1.94) and energy-adjusted protein(odds ratio=1.01) intake were positively associated with hypertension but sodium density(odds ratio=0.73) was showen to have inverse relationship.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1757-1763
• /
• 2010

Flywheel energy storage system (FESS) is defined as a high speed rotating flywheel system that can save surplus electric power. The FESS is proposed as an efficient energy storage system because it can accumulate a large amount of energy when it is operated at a high rotating speed and no mechanical problems are encountered. The FESS consists of a shaft, flywheel, motor/generator, bearings, and case. It is difficult to simulate rotor dynamics using common structure simulation programs because these programs are based on the 3D model and complex input rotating conditions. Therefore, in this paper, a program for the FESS based on the 2D FEM was developed. The 2D FEM can model easier than 3D, and it can present the multi-layer rotor with different material each other. Stiffness changing of the shaft caused by shrink fitting of the hub can be inputted to get clear solving results. The results obtained using the program were compared with those obtained using the common programs to determine any errors.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.15-22
• /
• 2009

Auto-navigation algorithm have been studied to avoid collision and grounding of a ship due to human error. There have been many research on collision avoidance algorithms but they have been validated little on the real coastal traffic situation. In this study, a Collision Avoidance algorithm is developed by using Fuzzy algorithm and the concept of Changeable Action Space Searching (CAS). In the first step, on a basis of collision risk calculated from fuzzy algorithm in the current time(t=to), alternative Action Space for collision avoidance is planned. In the second step, next alternative Action Space for collision avoidance in the future($t=to+{\Delta}t$) is corrected and re-planned with re-evaluated collision risk. In the third step, the safest and most effective course among Action Space is selected by using optimization method in real time. In this paper, the main features of the developed collision avoidance algorithm (CAS) are introduced. CAS is implemented in the ship-handling simulator of MOERI. The performance of CAS is tested on the situation of open sea with 3 traffic ships, whose position is assumed to be informed from AIS. Own-ship is fully autonomously navigated by autopilot including the collision avoidance algorithm, CAS. Experimental results show that own-ship can successfully avoid the collision against traffic ships and the calculated courses from CAS are reasonable.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.283-293
• /
• 2019

As applications in extreme environments such as aerospace, high-energy plasma and radio-active circumstances increases, the demand for materials that require higher melting points, higher mechanical strength and improved thermal conductivity continues to increase. Accordingly, in order to improve the oxidation/abrasion resistance of the carbon-carbon composite, which is a typical heat-resistant material, a method of using ultra high temperature ceramics was reviewed. The advantages and disadvantages of CVD coating, pack cementation and thermal plasma spraying, the simplest methods for synthesizing ultra-high temperature ceramics, were compared. As a method for applying the CVD coating method to C/C composites with complex shapes, the possibility of using thermodynamic calculation and CFD simulation was proposed. In addition, as a result of comparing the oxidation resistance of the TaC/SiC bi-layer coating and TaC/SiC multilayer coating produced by this method, the more excellent oxidation resistance of the multilayer coating on C/C was confirmed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.961-966
• /
• 2012

The concern about vacuum glass is enhanced as society gets greener and becomes more concerned about energy savings due to the rising cost of oil. The glass edge sealing process needs the high reliability among the main process for the vacuum glass development in order to maintain between the two glass by the vacuum. In this paper, the process of the edge sealing was performed by using the hydrogen mixture gas which is the high density heat source unlike the traditional method glass edge sealing by using the frit as the soldering process. The ambient temperature in the electric furnace was set in the edge sealing to prevents the thermal impact and transformation of the glasses and the temperature distribution uniformity was measured. The parameter of the edge sealing was set through the basic test and the mathematical relation with the area of the glass edge parts according to the parameter was drawn using the multiple regression analysis method.