• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.240-247
• /
• 2004

In order to transmit data at high speed in the wireless environment, OFDM is selected as the transmission method of various high-speed wireless communication system since it has the advantage to deal easily the serious selective frequency fading channel by the multiple path. We evaluate STBC-OFDM and linear STBC-OFDM combining with a class of recently proposed linear scalable space-time block codes and OFDM in MIMO channel environments, and demonstrate the performance for spatial multiplexing and diversity gain. The codes are able to use jointly transmit diversity in combination with spatial multiplexing, and achieve spatial and temporal diversity. Frequency diversity of frequency selective channels can be utilized by combining the linear STBC and OFDM. Simulation results are shown to demonstrate the better performance of proposed approach in comparison with STBC-OFDM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10C
• /
• pp.820-828
• /
• 2008

In order to achieve high coding efficiency, H.264/AVC video coding standard adopts the techniques such as variable block size coding, motion estimation with quarter-pel precision, multiple reference frames, rate-distortion optimization, and etc. However, these coding methods have a defect to greatly increase the complexity for motion estimation. Particularly, from multiple reference frame motion estimation, the computational burden increases in proportion to the number of the searched reference frames. Therefore, we propose the method to reduce the complexity by controlling the number of the searched reference frames in motion estimation. Proposed algorithm uses the optimal reference frame information in both $P16{\times}16$ mode and the adjacent blocks, thus omits unnecessary searching process in the rest of inter modes. Experimental results show the proposed method can save an average of 57.31% of the coding time with negligible quality and bit-rate difference. This method also can be adopted with any of the existing motion estimation algorithm. Therefore, additional performance improvement can be obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7A
• /
• pp.951-958
• /
• 2000

In wavelength-routed all-optical networks, signals are transmitted on a direct optical path, or a lightpath, in a single-hop manner without opto-electronic/electro-optic(OE/EO) conversion at intermediate nodes. However, due to the physical constraints of optical elements such as ASE noise and crosstalk signals can be degraded un a long path. To establish a connection under such impairments, the optical signal may need to be regenerated at intermediate nodes, dividing a lightpath into two or more fragments. However, since signal regeneration at intermediate nodes requires additional network resources, the selection of these nodes should be made carefully to minimize blocking of other lightpaths. In this paper, we deal with the problem of establishing a lightpath in a multihop manner under physical constraints. We provide both minimal-cost and heuristic algorithms for locating signal regeneration nodes(SRNs). For a minimal-cost algorithm, we formulate the problem using dynamic programming(DP) such that blocking of other lightpaths due to the lack of transmitters/receivers(TXs/RXs) and wavelengths is minimized throughout the network.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.491-499
• /
• 2003

The Okinawa Trough is a rift basin formed by extension. Analysis of multichannel seismic reflection profiles from the northwestern margin of the northern Okinawa Trough reveal that the trough is characterized by a series of tilted fault blocks bounded by listric normal faults and half-grabens developed between blocks, showing typical rifted structures. The trough display three kinds of sedimentary sequences with different seismic reflection characteristics: prerift, synrift and postrift sediments. The prerift sequence develops parallel to the dip direction of tilted fault blocks. The synrift sediments, mostly deposited in the half-grabens between tilted fault blocks, are generally well characterized by divergence of the reflectors towards the blocks indicating contemporaneous deposition during tilting. The postrift sediments are featured by continuous and parallel reflectors. The width of the half-graben and the throw-displacement rate of the basin bounding fault are closely connected. The throw-displacement rate is the maximum when the rifting event is the most active and the width of the half-graben is proportional to the rate.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.5
• /
• pp.25-36
• /
• 2022

This paper proposes a random sign reversal technique in space frequency block code for single carrier modulation. The traditional space time and frequency block coding technique may be confronted with radio environments openly, severe radio hijacking problems are to be overcome. In order to avoid such an open radio issue, random coded data protection technique for space-time block code was proposed, but this algorithm can change channel combination per an Orthogonal Frequency Division Multiplexing block. This kind of slow switching increases the probability that nearby receivers will detect the transmitted data. This paper proposes a fast switching algorithm per data symbols' basis which is a random sign reversal technique in space frequency block code for Single Carrier Modulation. It is shown in simulation that the proposed one has a superior performance in comparison with the performance of the receiver which do not know the random timing sequence of sign reversal.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.85.1-85.1
• /
• 2005

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1532-1535
• /
• 2013

변환 블록은 영상 압축에서 데이터를 공간적 영역에서 주파수 영역으로 변환해줌으로써 압축의 효율성을 높이는 역할을 수행한다. 본 논문에서는 고성능 HEVC를 위한 4개의 TU 모드($4{\times}4$, $8{\times}8$, $16{\times}16$, $32{\times}32$)를 지원하는 변환 블록 하드웨어 구조를 제안한다. 제안하는 변환 블록의 하드웨어 구조는 공통 연산기를 사용하여 각 TU 모드에 맞는 행렬 계수들 간의 연산을 수행한다. 또한 병렬적인 구조로 설계하여 $4{\times}4$, $8{\times}8$, $16{\times}16$, $32{\times}32$ 크기 TU 모드의 행렬 연산을 처리하는 사이클수가 35cycle로 동일하게 처리된다. TSMC 180nm CMOS 공정 라이브러리를 통해 합성한 결과 $4k(3840{\times}2160)@30Hz$의 영상을 기준으로 최대 동작주파수는 400MHz이고 총 게이트 수는 159k이며, 10-Gpels/cycle의 처리량을 갖는다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.2
• /
• pp.39-46
• /
• 2021

Damages by malware have recently been increasing. Conventional signature-based antivirus solutions are helplessly vulnerable to unprecedented new threats such as Zero-day attack and ransomware. Despite that, many enterprises have retained signature-based antivirus solutions as part of the multiple endpoints security strategy. They do recognize the problem. This paper proposes a solution using the blockchain and deep learning technologies as the next-generation antivirus solution. It uses the antivirus software that updates through an existing DB server to supplement the detection unit and organizes the blockchain instead of the DB for deep learning using various samples and forms to increase the detection rate of new malware and falsified malware.

• The KIPS Transactions:PartB
• /
• v.16B no.2
• /
• pp.123-130
• /
• 2009

Motion estimation (ME) plays an important role in digital video compression. But it limits the performance of image quality and encoding speed and is computational demanding part of the encoder. To reduce computational time and maintain the image quality, integer pel and fractional pel ME methods are proposed in this paper. The proposed method for integer pel ME uses a hierarchical search strategy. This strategy method consists of symmetrical cross-X pattern, multi square grid pattern, diamond patterns. These search patterns places search points symmetrically and evenly that can cover the overall search area not to fall into the local minimum and to reduce the computational time. The proposed method for fractional pel uses full search pattern, center biased fractional pel search pattern and the proposed search pattern. According to block sizes, the proposed method for fractional pel decides the search pattern adaptively. Experiment results show that the speedup improvement of the proposed method over Unsymmetrical cross Multi Hexagon grid Search (UMHexagonS) and Full Search (FS) can be up to around $1.2{\sim}5.2$ times faster. Compared to image quality of FS, the proposed method shows an average PSNR drop of 0.01 dB while showing an average PSNR gain of 0.02 dB in comparison to that of UMHexagonS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11C
• /
• pp.1077-1087
• /
• 2003

In this paper, we proposed an architecture of a cryptosystem with various operating modes for the network security and implemented in hardware using the ASIC library. For configuring a cryptosystem, the standard block ciphers such as AES, SEED and 3DES were included. And the implemented cryptosystem can encrypt and decrypt the data in real time through the wired/wireless network with the minimum latency time (minimum 64 clocks, maximum 256 clocks). It can support CTR mode which is widely used recently as well as the conventional block cipher modes such as ECB, CBC and OFB, and operates in the multi-bit mode (64, 128, 192, and 256 bits). The implemented hardware has the expansion possibility for the other algorithms according to the network security protocol such as IPsec and the included ciphering blocks can be operated simultaneously. The self-ciphering mode and various ciphering mode can be supported by the hardware sharing and the programmable data-path. The global operation is programmed by the serial communication port and the operation is decided by the control signals decoded from the instruction by the host. The designed hardware using VHDL was synthesized with Hynix 0.25$\mu\textrm{m}$ CMOS technology and it used the about 100,000 gates. Also we could assure the stable operation in the timing simulation over 100㎒ using NC-verilog.