• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.61-68
• /
• 2023

Multi-band method which allocate the same data to different frequency bands, improves performance by compensating Doppler spreading and selective fading in underwater communications. The drawback of multi-band configuration may have worse performance because performance degradation in a particular band affects the output from the entire bands. It is very important to find which band is superior or inferior band in order to improve performance. Therefore this paper analyzes performance prediction algorithms of each band. This paper proposes three kinds of prediction methods. Through the ocean tests, this paper confirms utilizing the preamble error rates is most efficient algorithm among of them.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.370-381
• /
• 2021

This paper presented an efficient transceiver structure of multiband Frequency Shift Keying (FSK) signals with direct sequence spread spectrum for maintaining covertness and performance. In aspect to covertness, direct sequence spread spectrum method, which multiplying by Pseudo Noise (PN) codes whose rate is much higher than that of data sequence, is employed. In aspect to performance, in order to overcome performance degradation caused by multipath and Doppler spreading, we applied multiband, turbo equalization, and weighting algorithm are applied. Based on the simulation results, by applying 4 number of multiband and number of chips are 8 and 32, experiments were conducted in a lake with a distance of moving from 300 m to 500 m between the transceivers. we confirmed that the performance was improved as the number of bands and chips are increased. Furthermore, the performance of multiband was improved when the proposed weighting algorithm was applied.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.3
• /
• pp.16-25
• /
• 1998

In this paper, we propose features extraction method using Rough sets theory for efficient data classifications in hyperspectral environment. First, analyze the properties of multispectral image data, then select the most efficient bands using discemibility of Rough sets theory based on analysis results. The proposed method is applied Landsat TM image data, from this, we verify the equivalence of traditional bands selection method by band features and bands selection method using Rough sets theory that pmposed in this paper. Finally, we present theoretical basis to features extraction in hyperspectral environment.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.295-300
• /
• 2004

변화탐지를 위하여 기존에 사용하던 화소차 혹은 화소비 변화탐지 기법은 단밴드의 영상을 사용하므로 다중분광 자료를 활용하기 어렵고 변화지역의 유형을 추출하는데 적절하지 못하다는 단점이 있다. 후분류 변화탐지 기법은 다중분팡 영상의 활용이 가능하고 변화지역의 변화 유형을 파악할 수 있지만 변화탐지 성과가 분류 결과의 정확도에 의해 크게 영향을 받는다. 이에 반해 CVA(Change Vector Analysis) 변화탐지는 여러 밴드의 다중분광 영상을 이용하여 변화지역을 탐지할 뿐 아니라 피복 변화의 경향을 파악할 수 있어 보다 효율적인 기법으로 평가받고 있다. 기본적인 CVA 변화탐지는 일반적으로 다중분광 영상의 red 밴드와 infrared 밴드의 영상을 조합하여 변화탐지를 수행하여 식생 및 인공물의 변화를 탐지한다. 본 연구에서는 단순한 red/NIR 밴드간의 조합 외에 식생의 특성을 계수로 변환하는 PDA(Pattern Decomposition Analysis) 변환 및 Tasseled Cap 변환 결과를 이용한 CVA 변화탐지를 수행하고 각 결과의 정확도를 비교하여 보다 효율적인 식생 변화탐지 기법을 제안하고자 하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.359-369
• /
• 2021

In underwater communications, to compensate performance degradation induced from rapidly changing channel transfer characteristic, multi-band communication method which allocate the same data to different frequency bands is used. However, the multi-band configuration may have worse performance than the single-band one because performance degradation in a particular band affects the output from the entire bands. This problem can be solved through a receiving end that analyzes error rates of each band, sets threshold values and allocates lower weights to inferior bands. Therefore, this paper proposed a weighting algorithm based on estimated Bit Error Rate (BER) which analyzes reliability of received data based on the performance difference between demodulated and decoded data. Employing turbo codes with coding rate of 1/3, we evaluate the performance of the proposed weighted multi-band transmission model in real underwater environments based on optimal simulation parameters. Through the sea trial experiment, we confirmed error performance was improved by applying the proposed weighting algorithm.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.94-99
• /
• 2003

다중분광 영상의 정확한 지형지물 분류를 수행하기 위하여 분류 클래스의 훈련지역 선정과 선정된 클래스의 분리도 분포가 중요하다. 최근에 이용되고 있는 위성탑재 초다중분광 영상은 많은 밴드를 포함하고 있기 때문에 데이터 처리가 어렵고, 노이즈로 인하여 다중분광 영상보다 분류 결과가 나쁜 경우도 나타난다. 특히 대상지역의 클래스에 따른 훈련지역의 선정시 밴드수에 비해 상대적으로 제한된 훈련화소 크기로 인하여 공분산 행렬의 계산에 어려움이 따른다. 따라서 본 연구에서는 Hyperion 데이터를 이용한 분류를 수행하기 위하여 필요한 유효 밴드 추출 방식을 알아보고, 분류영상의 정확도 평가를 통하여 추출된 밴드와 분류 클래스의 적합성 관계를 확인하고자 한다 이 과정에서 클래스 분리도를 이용하여 정확도 평가 이전에 밴드와 클래스 선정의 타당성을 확인할 수 있다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.235-240
• /
• 2018

FTN method which transmits signals faster the Nyquist rate is representative method for improving throughput efficiency sacrificed performance due to inter-symbol interference. To compensate performance loss, in this paper, we propose a multiband FTN method which split the coded bits into several bands and transmits signals applying FTN method. As coded bits are being assigned different bands, number of samples per bit of each band is increased, it induced performance improvement by noise averaging effect. In the simulations, compared the performance of single band FTN method and multiband FTN method when the interference rate is 25%. The results of simulation show the performance of proposed method is better than that of single band FTN one by 0.3dB~0.5dB.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.329-332
• /
• 2020

본 논문은 USAC(Unified Speech and Audio Coding) 오디오 부호화 기술의 성능 개선에 관련한 것이다. USAC 은 FD(Frequency domain) 양자화 모듈과 LPD(Linear prediction domain) 양자화 모듈을 탑재하고 있다. 본 논문에서는 LPD 모드로부터 생성되는 잔차신호에 대하여 주파수 영역에서 다중밴드로 분할하고 각 밴드 별 양자화를 독립적으로 수행함으로써 USAC 의 LPD 모드의 양자화 효율을 개선하였다. 그 결과 동일 조건에서 제안방법이 기존의 LPD 모드의 성능을 음질 측면에서 향상시킴을 확인할 수 있었다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.253-258
• /
• 2018

The multiband communication technique is effective in terms of performance and throughput efficiency because it can overcome selective frequency fading by allocating the same data to different frequency bands in the environment of rapidly changing channel transfer characteristic. In addition, the transmission distance can be further extended while overcoming various underwater channel environments. In this paper, we analyzed the performance of multiband transmission technique in underwater communication by increasing number of band using Turbo pi code with a coding rate of 1/3. Simulation results shows that the performance is improved when the number of bands is increased based on the received SNR.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.344-352
• /
• 2020

Covertness and performance are very important design goals in the underwater communications. To satisfy both of them, we proposed efficient underwater communication model which combined multiband and direct sequence spread spectrum method in order to improve performance and covertness simultaneously. Turbo coding method with 1/3 coding rates is used for channel coding algorithm, and turbo equalization method which iterately exchange probabilistic information between equalizer and decoder is used for receiver side. After optimal threshold value was set in Rake processing, this paper analyzed the performance by varying the number of chips were 8, 16, 32 and the number of bands were from 1 to 4. Through the simulation results, we confirmed that the performance improvement was obtained by increasing the number of bands and chips. 2~3 dB of performance gain was obtained when the number of chips were increased in same number of bands.