• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.701-704
• /
• 2011

The reliability of a computer system largely depends on that of its memory systems, which are vulnerable to soft errors. Soft errors can be coped with a combination of an Error Detection & Correction circuit and scrubbing operation. Smaller geometries and lower voltage of advanced memories makes them more prone to suffer multibit soft errors. A memory structure against multibit soft errors and a suitable scrubbing scheme for it were proposed. This paper introduces a key issue for the scrubbing of the memories with protection against multibit soft errors and the result of the performance analysis from a reliability point of view.

• Journal of the Korean earth science society
• /
• v.35 no.1
• /
• pp.29-40
• /
• 2014

A DC resistivity survey was performed to detect anomalies beneath concrete pavement. A set of high conductive media and planar electrodes were used to lessen the effect's a high contact resistance of concrete. Results of the resistivity survey were analyzed and compared with those of other geophysical surveys such as Ground Penetration Radar (GPR), Impulse Response (IR), and Multi-channel Analysis of Surface Waves (MASW), which were carried out in the same location. The results of resistivity survey showed a high resistive distribution in the section of sink and pavement where a pattern of reinforcement was observed through the GPR survey. Also, a comparison of results between the IR and resistivity surveys indicated that the high resistivity was produced by the high dynamic stiffness in the reinforced section. The co-Kriging of both the results of DC resistivity and MASW surveys at the same location showed that an integrated geostatistical analysis is able to give more accurate description on the anomalous subsurface region than can a separate analysis of each geophysical approach. This study suggests that the integrated geostatistical approaches were used for a decision-making process based on the geophysical surveys.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.419-419
• /
• 2022

최근 전 지구적 기후변화의 발생으로 수문현상의 규모와 빈도가 예측하기 어려운 수준으로 변화되고 있다. 이에 따라 정밀한 데이터를 활용한 수공구조물 운영 및 관리의 중요성이 대두되고 있다. 이 중에서도 다목적댐은 이·치수 측면에서 모두 활용되기 때문에 정밀한 댐 운영을 위한 댐 유입량 자료의 수집 및 관리가 필요하지만 현실적 한계로 인해 간접적으로 측정되고 있다. 현재 국내 다목적댐 저수지의 유입량은 댐시설 유지관리 기준(MW, 1994)에서 제시한 저수지 수위 변동량과 댐 방류량의 추정치로부터 계산하는 간접측정방법을 통해 산정되고 있다. 그러나 이와 같은 방법은 태풍이나 집중호우 등 대규모 홍수 발생 시 저수지 수위의 불균일성으로 인한 오차가 나타나며, 음유입량 및 톱니바퀴 형태의 자료가 발생하는 등 정확도 측면에서 한계가 있다. 따라서 본 연구에서는 한국건설기술연구원에서 2008년 개발한 물리적 기반의 분포형 유출해석 모형인 GRM(Grid based Rainfall-Runoff Model)을 활용하여 상류 유량관측소(옥동교 관측소, 영춘 관측소) 관측유량과 충주댐 지점 모의유량간의 경험공식을 도출하였으며, 이를 통해 상류 유량 관측소의 유량자료를 활용한 댐 유입량 직접산정이 가능하도록 하였다. 또한 다중 관측소 활용 시 댐 유입량 모의 성능이 개선되는지 여부를 확인하기 위해 3가지 경우(옥동교 관측소 단일, 영춘 관측소 단일, 옥동교·영춘 관측소 다중)로 구분하고 각 공식의 성능을 비교 평가하였다. 분석 결과 상류 관측소 관측유량과 댐 본체 지점의 모의유량이 비교적 높은 상관관계(0.79~0.96)를 보였으며, 단일 관측소를 활용한 공식 대비 다중 관측소를 활용한 공식이 더 높은 결정계수를 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.7-13
• /
• 2019

This study aims to develop a FE Model to simulate dissimilar friction stir welding and to address its potential for fundamental analysis and practical applications. The FE model is based on Coupled Eulerian-Lagrangian approach. Multiphysics systems are calculated using explicit time integration algorithm, and heat generations by friction and inelastic heat conversion as well as heat transfer through the bottom surface are included. Using the developed model, friction stir welding between an Al6061T6 plate and an AZ61 plate were simulated. Three simulations are carried out varying the welding parameters. The model is capable of predicting the temperature and plastic strain fields and the distribution of void. The simulation results showed that temperature was generally greater in Mg plates and that, as a rotation speed increase, not the maximum temperature of Mg plate increased, but did the temperature of Al plate. In addition, the model could predict flash defects, however, the prediction of void near the welding tool was not satisfactory. Since the model includes the complex physics closely occurring during FSW, the model possibly analyze a lot of phenomena hard to discovered by experiments. However, practical applications may be limited due to huge simulation time.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.98-105
• /
• 2009

The cochlea of the inner ear has two core components, basilar membrane and hair cells. The basilar membrane disperses incoming sound waves by their frequencies. The hair cells are on the basilar membrane, and they are the sensory receptors generating bioelectric signals. In this paper, a biomimetic technology using ZnO piezoelectric nano-pillar was studied as the part of developing process for artificial cochlea and novel artificial mechanosensory system mimicking human auditory senses. In particular, ZnO piezoelectric nano-pillar was fabricated by both low and high temperature growth methods. ZnO piezoelectric nano-pillars were grown on solid (high temperature growth) and flexible (low temperature growth) substrates. The substrates were patterned prior to ZnO nano-pillar growth so that we can selectively grow ZnO nano-pillar on the substrates. A multi-physical simulation was also conducted to understand the behavior of ZnO nano-pillar. The simulation results show electric potential, von Mises stress, and deformation in the ZnO nano-pillar. Both the experimental and computational works help characterize and optimize ZnO nano-pillar.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.59-60
• /
• 2015

반도체 공정에서는 소자 내부의 물리량 계산을 통해 결점를 검출하는 시뮬레이션을 수행하게 된다. 이를 위해 3차원적 형상을 표현하여 물리적 미분 방정식을 계산하는 유한 차분 시간 영역 알고리즘(Finite-Difference Time-Domain, 이하 FDTD)과 같은 수치해석 기법이 사용된다. 반도체 테스트 범위의 확장으로 인해 시뮬레이션 사이즈 또한 커지고 있는 추세이다. 이에 따라 하나의 프로세서에서 수행할 수 없는 문제가 발생하기도 한다. 이를 해결하기 위해 본 논문에서는 openMP와 MPI를 이용한 하이브리드 컴퓨팅 기법을 바탕으로 다중 GPU 제어를 통해 시뮬레이션 환경을 구축하였으며 정상 동작함을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.672-675
• /
• 2009

동해 울릉분지에서 취득된 다중채널 탄성파자료 해석에 의하면 이 지역에는 가스하이드레이트 부존가능성을 지시하는 해저모방반사면, 탄성파침니/칼럼, 음향공백대, 증폭반사면, 가스분출 구조 등을 포함하는 5가지 탄성파 지시자가 존재한다. 가장 대표적인 지시자인 해저모방반사면은 연구지역의 남쪽사면의 경우 연속성이 양호하고 강한 진폭을 갖는 반면, 북쪽 중앙분지에서는 상대적으로 진폭이 약하고 연속성이 불량하다. 반사도 감소 및 속도 풀업 특징을 갖는 탄성파 침니/칼럼구조는 중앙분지와 북동쪽해역에 주로 분포하며 가스하이드레이트 혹은 가스유체의 부존가능성을 시사해준다. 반사강도가 약화되어 나타나는 음향공백대는 저탁류/원양성 퇴적물이 분포하는 중앙분지에 부분적으로 발달하며, 칼럼과 연계된 음향공백대는 북동쪽 사면저부에 주로 분포한다. 해저모방반사면의 하부에 위치하는 증폭반사면은 연구지역의 서쪽 사면에 분포하며 강한 음의 진폭특성으로 보아 자유가스를 함유한 층으로 해석된다. 가스분출구조는 주로 쇄설성 퇴적물이 우세한 조사지역의 남쪽 대륙사면지역에 광범위하게 분포하며 돔구조 혹은 폭마크 등을 수반한다.

• Water for future
• /
• v.28 no.6
• /
• pp.193-202
• /
• 1995

The subjective research attempts to apply a rainfall-runoff model capable of considering time-variation of soil water contents which are highly correlated to the river flows on the qpqyungchang river basin and to evaluate its performance for flow forecasting. The model used in this study is a physically-based conceptual time-continuous model, which is composed of the Sacramento soil moisture accounting model and the nonlinear multiple conceptual reservoirs model. The daily precipitation and evaporation data for 7 years and for 3 years were used for the parameter estimation and the model verification, respectively. As a result, the flows including a significant flood event were well simulated, and the cross-correlation coefficient between observed flows and computed flows for the verification periods was 0.87, but in general computed flows were underestimated for the low-flow periods. Also, the effects of precipitation and soil water content to the river flows were analysed for the flood and the drought.

• Progress in Medical Physics
• /
• v.15 no.3
• /
• pp.140-148
• /
• 2004

The absorbed dose for proton beam in water was calculated using the PTRAN code system. The proton interactions with water and the description on absorbed dose calculations are discussed, and the file structure and an execution example of the PTRAN codes are described. For 60, 100, 150, 200, and 250 MeV proton beams it is demonstrated that the absorbed dose is determined from the sum of Coulomb interactions and nuclear reactions, and that the Bragg peak feature depends On the energy straggling and multiple scattering. The PTRAN code was useful for studying the fundamental mechanism of the absorbed dose to water for clinical proton beams.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1141-1149
• /
• 2013

Dimensional analysis is an important tool for developing mathematical models of physical phenomena in order to understand the effects of laser shock peening(LSP) process parameters. By using the Bucking ${\prod}$ theorem, we proposed an applicable dimensional analysis method to verify the effects of LSP process parameters on the residual stresses. Furthermore, by using finite element analysis, we proposed a finite element method of LSP and discussed various parameters, such as peak pressure, pressure pulse duration, laser spot size, and multiple LSPs.