• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.90-96
• /
• 2020

As various communication services have emerged due to the development of mobile communication technology, there is a need for a wideband antenna supporting multiple communication services with one antenna. In this paper, we propose a planar slot wideband antenna that can support all the communication services of 3.1~4.99GHz, the low frequency band of 5G, in addition to the existing communication services such as WiFi, LTE 2300/2500, and WiMAX. Through the simulation, the optimized antenna design parameters were obtained, and the antenna was fabricated to implement an antenna with a frequency bandwidth of 1.96~6.01GHz (S11 <-10dB) and presented the radiation pattern and gain of the antenna. The proposed antenna is a multi-band antenna that can provide all the services of LTE, Wifi, WiMAX, and 5G low frequency bands. It can be used as a repeater antenna in radio shadow area such as buildings, dense areas, and ships.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.96-100
• /
• 2001

본 논문에서는 skeleton slot 복사기를 이용하여 GSM 900과 GSM 1800에서 사용할 수 있는 이중대역 안테나를 설계 및 제작하여 측정 결과를 비교 분서하였다. 기본적인 skeleton slot 구조에서는 낮은 밴드의 2배 이상의 주파수에서는 수평 빔폭이 일정치 않고, 정재파비 특성이 불량하였으나, 급전부와 측면 방사부분의 다중경로 형성 및 절곡 구조를 이용하여 이를 해결하였다. 안테나의 크기는 반사판이 190$\times$190(mm), 복사기는 154$\times$106(mm), 높이는 33mm로 하여 현재 서비스 사업자틀이 주로 사용하는 크기로 구성하였다. 구성 재질은 1mm 두께의 알류미늄판을 이용하며, 이를 NCT로 타공 및 절곡하여 제작하였기 때문에 대량 생산 시 단가를 낮출수 있다. 실측결과 900MHz 대역에서 13.7%, 1800MHz 대역에서 16.4%의 -l0dB 반사손실 대역폭을 만족하고, 방사패턴도 대역별로 $\pm$1$^{\circ}$이내의 일정한 양상을 보여 이중대역 안테나로서의 요구를 만족하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.59-66
• /
• 2010

In this paper, the internal antenna for mobile communication handset which is able to control both coupling coefficient and resonant frequency without any major modification of radiator and ground plane of antenna. Novel internal antenna with its controllable resonant frequency is presented for triple-band or over mobile handsets. The operating range can include GSM(880~960 MHz), GPS($1,575{\pm}10MHz$), DCS(1,710~1,880MHz), US-PCS(1,850~1,990 MHz), and W-CDMA(1,920~2,170 MHz). The proposed antenna is realized by combination of a half wavelength loaded line antenna and PIFA(Planner Inverted F Antenna). A single shorting and feeding points are used and they are common to both antenna structures. One of two inductors which is placed at each shorting post, one inductor is for adjusts amount of coupling, and the other controlling the resonant frequency in DCS/US-PCS/WCDMA bands. The inductance range for control of input impedance is between 0nH and 6.8nH, and each of gain variation in GSM, GPS and DCS/US-PCS/WCDMA band is under 0.15dBi, 0.73dBi and 0.29dBi. The inductance range for control of the resonant frequency is between 1640MHz and 2500MHz, and each of gain variation in GSM, GPS and DCS/US-PCS/WCDMA band is under 0.46dBi, 0.53dBi and 0.8dBi.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.85-92
• /
• 2003

In this paper, a multiple U-shaped slot antenna on 5㎓ band is designed, fabricated, and measured. The prototype consists of a U-shaped slot and two Invert U-shaped slot. To obtain wide bandwidth, the foam layer is inserted between ground plane and substrate. After various parameters, length, width, position of U-shaped slot horizontal, interval length between two invert U-shaped slot, feeding position and airgap width, optimized, a multiple U-shaped slot antenna is fabricated and measured. The measured results of the antenna are compared with its simulated results. A 2:1 VSWR impedance bandwidth of 20.4% is achiedved by employing this technique. The gain is about 5.5㏈i. The experimental far-field patterns are stable across the pass band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.20-26
• /
• 2013

In this paper, we propose a multi-band monopole antenna with a band-notching U-slot, which is fabricated inside the flexible polymide film substrate. The U-shaped slot located on the patch-shaped monopole antenna provides band-notch at 2.7 GHz, but also helps to improve return loss at adjacent frequency bands. The performance of the antenna attached on an automobile-glass has been simulated and measured. The fabricated antenna provides more than 10 dB return loss for ISM band(2.4~2.483 GHz) and WAVE band(5.85~5.925 GHz), 2.8~5.7 dBi maximum gain, and good radiation patterns.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1286-1291
• /
• 2013

Intensive researches on multiuser-based Massive MIMO are performed to increase the spectral efficiency. Although the Massive MIMO scheme based on huge number of antennas inevitably causes hardware and computational complexity in baseband and radio frequency (RF) elements, the problem can be mitigated without serious performance degradation by limiting the number of baseband and RF elements below the number of transmit antennas of base station and opportunistically selecting transmit antennas according to channel states. Accordingly, this paper proposes a simple antenna selection scheme for multiuser-based Massive MIMO systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.91-96
• /
• 2010

In this paper, an internal USB dongle antenna with a circular hook-shaped patch is proposed. The proposed antenna comprises of a circular hook-shaped patch and a monopole stub. The proposed antenna with the dimension of $10mm{\times}50mm{\times}0.8mm$ was fabricated on commercial FR-4 substrate with a dielectric constant of 4.6 and tangent loss of 0.025. The designed antenna exhibits three different resonant bandwidths, 2.4 GHz-2.5 GHz, 3.4 GHz-3.6 GHz, and 5.15 GHz-5.825 GHz. The measured radiation patterns are omni-directional at measured frequencies. Therefore, the proposed antenna is suitable for wireless USB dongle antenna that can support multiband wireless services such as WLAN, WiMAX and Bluetooth.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.179-181
• /
• 2004

This study presents a cylindrical WLAN antenna for MIMO systems. Three typical inverted-F antennas, which have individual ground plane, are placed on the cylindrical rod. An optimum antenna is fabricated by theoretical prediction and numerical simulation. The proposed antenna here can operate in the 5GHz bands(IEEE 802.1la) and be adopted in small wireless communication systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.3 s.333
• /
• pp.19-24
• /
• 2005

This paper presents design simulation, implementation, and measurement of a miniaturized GPS/K-PCS dual-band LTCC chip antenna for mobile communication handsets. The dimension of LTCC chip antenna is $9mm\times15mm\times1.2mm$. The meander type radiating patch for dual-band operation is realized by using via holes with 0.3mm height to connect upper and lower-layer antenna. The lower meander type antenna is to be tuned to the lower frequency (GPS) band. The upper meander antenna with via hole connection is to contribute the higher frequency (K-PCS) band. The resonant frequency and frequency ratio of the proposed antenna can be adjusted by changing the height of via-hole and effective path of meander radiating patch. The electrical characteristics of the meander chip antenna applied to a GPS/K-PCS are suitable for mobile communication application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.298-304
• /
• 2007

In this paper, the antenna which has a multiband operation (GSM850, EGSM, DCS1800, USPCS, W-CDMA) is proposed. This antenna was designed by the commercial software HFSS 3-D EM simulator, and it is organized by using a meander branch structure which has a via and lines on FR-4$(\varepsilon_r=4.4)$ substrate. Especially, it has a gap feeding structure which makes good operation at overall bandwidth. The designed antenna is manufactured by PCB processing, and measured by using a network analyzer and a test chamber. The manufactured antenna with the dimension of 8 mm width, 20 mm height and 3.2 mm thickness is able to applied as an internal antenna for multiband mobile phones.