• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.334-339
• /
• 2008

Recently electro spinning is a widely used simple technique to prepared micro- to nanometer-sized fiber of various polymers. In general, a normal multiple-nozzle electro spinning system has been difficult to achieve high production-rate fabricating micro/nanofibers due to the interference of electric field between individual nozzles in the process. To reduce the interference effect of electric field between nozzles, we developed a multi-nozzle electrospinning system supplemented with auxiliary electrodes. Poly($\varepsilon$-carprolactone)(PCL), which has good mechanical property and biocompatibility, was electrospun by the multi-nozzle electro spinning system. Electrospinnability, product rate, and size uniformity of spun fibers for the system with and without auxiliary electrodes were characterized. As a result, the multi-nozzle electrospinning system supplemented with auxiliary electrodes provides excellently stable processability and showed high mass productivity of PCL-nanofibers relative to a normal multi-nozzle electro spinning system.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.326-327
• /
• 2000

May(1945)에 의하여 임팩터가 개발된 이후 임팩터의 단별 분리입경의 정확성을 증가시키고, 기판에서 입자의 채취량을 늘리며, 임팩터 내부의 입자손실과 기판에서 입자가 충돌하여 튀어나오는 것(bounce)을 줄일 수 있는 방법 등이 꾸준히 연구되고 있다. 가속 노즐의 형상을 사각형에서 원형으로 변경하여 분리효율곡선의 기울기(stiffness)를 증가시킬 수 있었고(Mitchell and Filcher, 1959), 임팩터의 한 단에 여러 개의 가속 노즐을 가공한 다중 노즐(multi-jet) 임팩터를 사용함으로써 단의 분리입경을 낮추고, 입자의 채취량을 늘릴 수 있게 되었다(Anderson, 1958). (중략)

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.5
• /
• pp.54-58
• /
• 2015

The objective of this paper is to investigate the flow characteristics of the multi nozzle. The configurations of the single, the 3- and the 6-nozzle were selected under Mach number of 2.5. Under-expanded pressure ratio such as 1.2, 1.6 and 2.0 were selected to elucidate interference of the free jet. The flow visualization was carried out with the Schlieren system and a supersonic cold-flow system. Also, the flow characteristics were studied computationally with the density measurements. Reasonable agreement between experimental and theoric equation has been achieved qualitatively.

• Journal of Power System Engineering
• /
• v.3 no.1
• /
• pp.23-28
• /
• 1999

Experimental and theoretical researches about jet pump have been carried out by many researchers. Jet pump can be used for the transportation of solid materials, farm produce, and fishes. It is the purpose of this paper to seek optimal multi nozzle shape of the annular jet pump. Experiments were done for several jet nozzle areas, jet nozzle arrays and jet nozzle lengths. Water was used for both the primary fluid and secondary fluid. The efficiency curves for the annular jet pump having multi nozzles are presented in this paper.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.2 s.257
• /
• pp.195-201
• /
• 2007

A visualization study of flow characteristics in a mixer using multi-nozzle bubbling was performed. The mixer is filed with liquid glycerin (dynamic viscosity = $1000mPa{\cdot}s\;at\;25^{\circ}C$) and convective mixing is induced by air bubbles generated from 9 orifices installed on the bottom of the mixer. To visualize the flow field, PIV (Particle Image Velocimetry) system consisting of 532nm Nd:YAG laser, $2k{\times}2k$ CCD camera and synchronizer is adopted. The bubbles generated with uniform size and frequency form bubble stream and bubble streams rise vertically without interaction between bubble streams. Mixing efficiency is affected by the height of bubbler and the effective height of bubbler is 20nm from the bottom of the mixer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.183-184
• /
• 2010

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.11-14
• /
• 2006

This study investigates the flow field of multiple-jet measured by hot-wire anemometry. The experiments were classified into two cases; 6- or 7-nozzle located circumferentially in equal interval without or with a central jet. The effect of the number of nozzles the flow field was examined when the Reynolds number based on the nozzle diameter is about $10^4$. Mean Velocity, normal and Reynolds stresses were measured in the downstream of jets. The Tollmien's theory holds far downstream at 48d apart from the nozzle exit especially when a nozzle locates at the center. The general flow characteristics is influenced due to the number of nozzles.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.6
• /
• pp.743-752
• /
• 1998

Experiments were performed to characterize single-phase heat transfer behavior of submerged liquid jet with multiple nozzle normally impinging on the smooth and extended surfaces. Arrays of 9 and 36 nozzles were used, with diameters of 0.5 to 2.0mm providing nozzle area ratio (AR) from 0.05 to 0.2. The square pin fin arrays were chosen as extended surfaces and the effects of geometrical parameters such as fin height, the ratio of fin width to channel width on heat transfer enhancement were examined. Single nozzle characteristics were also evaluated for comparison. The results clearly showed that heat transfer enhancement could be realized by using multiple nozzles at the constant volume flow rate. The average Nusselt number of multiple nozzle impingement on the smooth surface was correlated by the following equation : Nu/$Pr\frac{1}{3}=0.94 Re^{0.56}N^{-0.12}AR^{0.50}$The average heat transfer coefficients of multiple nozzle impingement on the extended surfaces decreased with increasing fin height and the ratio of fin width to channel width. The effectiveness of ex-tended surfaces ranged from 1.5 to 3.5 depending on the fin height, the ratio of fin width to channel width of pin fin arrays, nozzle number and nozzle area ratio.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1178-1183
• /
• 2008

This paper is about a study of atomizing characteristics of a Multi-Nozzle, which is an important part in a flooding water mist system for extinguishing fires broke out in ships. Comparing the results of experiments for the Single-Nozzle to that of numerical analyses, characteristics of a Multi-Nozzle can be found out. In situation of a Single-Nozzle’s, the atomizing angle was $34^{\circ}$. And in situation of Multi-Nozzle that combined with 5 single-nozzles, the atomizing angle increase to $125^{\circ}$. The effective area is 3.7 times of the former. The quality factor will reduce, if the diameter of the atomizing region of the nozzle reduces. Although the atomizing angle is reduced because of the atomizing property, the value of SMD still shows a good result.

• Journal of computational fluids engineering
• /
• v.3 no.1
• /
• pp.89-99
• /
• 1998

한국형 차세대원자로에서는 비상노심 안전주입수가 저온관을 통하지 않고 원자로용기에 직접 주입된다. 원자로용기의 가압열충격과 열수력적 관점에서 최적의 노즐위치를 결정하기 위해서 전산유체역학을 활용하였다. 상용 전산유체코드인 CFX를 이용하여 원자로 하향유로를 모사하는 해석대상 격자를 다중불록으로 형성한 다음 유동장을 비압축성 Navier-Stokes 운동량 방정식, 에너지 방정식과 표준 k-ε 난류모형 등으로 모형화하여 3차원 비정상상태 계산을 수행하였다. CFX에서는 경계 밀착좌표계, 비엇물림격자와 SIMPLE 알고리즘을 사용한다. 본 연구결과 원자로용기의 가압열충격 관점에서 가장 보수적인 사고인 증기관 파단사고시에도 열적혼합이 잘 일어나 가압열충격이 발생할 가능성이 없는 것으로 판단되며 안전주입수 노즐이 저온관 바로 위에 위치할 때 원자로 하향유로 내의 온도 분포가 가장 균일하여 열적 혼합 관점에서는 최적의 위치로 판단된다.