• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.251-257
• /
• 2021

An underwater platform operating a passive sonar needs to acquire the target position to perform its mission. In an environment where sea-floor reflections exist, the position of a target can be estimated using the difference in the arrival time between the signals received through multipaths. In this paper, a method of localization for passive sonar is introduced, based on the EKF (Extended Kalman Filter) using the multipath time difference of arrival in underwater environments. TMA (Target Motion Analysis) requires accumulated measurements for long periods and has limitations on own-ship movement, allowing it to be used only in certain situations. The proposed method uses an EKF, which takes measurements of the time differences of the signal arrival in multipath environments. The method allows for target localization without restrictions on own-ship movement or the need for an observation time. To analyze the performance of the proposed method, simulation according to the distance and depth of the target was performed repeatedly, and the localization error according to the distance and water depth were analyzed. In addition, the correlation with the estimated position error was assessed by analyzing the arrival time difference according to the water depth.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.529-531
• /
• 2002

VoIP기술의 확산과 그에 따른 IP기반의 망을 포함한 packet, Multimedia서비스를 제공하는 서비스가 늘고있다. 그러나 실시한 서비스를 필요로 하는 이 서비스의 경우에는 그에 따르는 경로에 확실한 대역폭의 조건이 요구되고 있다. 하지만 best-effort방식을 사용하는 기존의 망에서는 대역폭의 확실한 보장이 이루지기 힘들다. 하지만 MPLS와 트래픽 엔지니어링 기술의 발전으로 다중경로 패킷 전달 및 동적인 부하 제어가 가능하게 되었다. 곧 차별화된 서비스에 따른 대역폭의 할당이 이루어질 수 있다. 동적인 부하 제어는 네트웍의 상태를 고려하여 경로간의 부하를 조절함으로써 네트웍의 효율성을 높일 수 있으나, 상태 정보의 시간차이에 의해 불안정한 상태에 이르기 쉽다. 본 논문에서는 차별화된 서비스를 하기 위해 부하의 할당을 안정적으로 변화시키면서도 효율적인 부하로 용량에 맞게 흐름을 받아들이고 패킷을 전송하는 기법을 제안한다.

• Annual Conference on Human and Language Technology
• /
• 1994.11a
• /
• pp.146-154
• /
• 1994

한국어는 단어들 사이에 공백이 없는 미분절어이기 때문에, 한국어를 분석하기 위해서는 단어의 경계를 식별하는 분절이 선행되어야 한다. 분절은 쉽지 않은 과정이고 잘못된 분절은 구문분석, 의미 분석 단계에서 심각한 오류를 유발하기 때문에 형태소 분석의 중요한 작업중의 하나가 되어왔다. 기존의 한국어 분석 시스템들은 분절의 어려움으로 인하여 입력 문자열의 끝까지 읽은 후, 우에서 좌로 분석하는 two-pass 전략이나 단어들 사이에 공백을 삽입하여 처리하는 방법을 사용하였다. 또한 이 시스템들은 형태소 분석이 완결된 후, 파서에게 결과를 전달하는 순차적인 전략을 사용하였다. 본 논문은 영어의 분석과 같이 형태소 분석 동안에 파싱을 할 수 있는 one-pass 전략을 사용하여 한국어를 효율적으로 처리하는 모델을 제안한다. 이를 위해 형태소 분석 방법으로써 확장된 최장일치법을 제시하며, 위 방법에서 생성되는 문제점인 다중-범주 구를 처리하기 위하여 다중-경로 LR 파싱을 제시한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.1
• /
• pp.52-56
• /
• 2006

This paper presents a cross-eye characteristics of multi-path wave scattering. Cross-eye method uses the phase differences of multi signals and is used fur electronic protection. When a signal is propagated from transmitter to receiver on the ground surface, direct wave and reflected wave signals are combined in front of the receiving antenna with different phases. To calculate and control the amplitude and phase of reflected signal, we have developed a cross eye electronic protection method for radar system and studied the variation of electric power density.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.21-29
• /
• 2010

In Ad-Hoc Networks, the limited energy is the key issue for longer network operation time. To solve this problem, various energy-aware routing techniques have been proposed including PSR (Power-aware Source Routing), HPSR (Hirachical Power-aware Source Routing), and etc. Those techniques generally select the most adequate route considering the energy consumption so that the energy efficiency can be improved. However, There are problems in those techniques that traffic can be concentrated in some specific area in a network. In this paper, a new energy aware routing technique called MPSR is proposed to achieve longer network lifetime and fewer rerouting attempts.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.2
• /
• pp.105-112
• /
• 2018

To determine the position of receiver, the GPS (Global Positioning System) uses position information of satellites and pseudo ranges based on signals. These are reflected by surrounding structures and multipath errors occur. This paper proposes a method for multipath error reduction using digital images to enhance the accuracy. The goal of the study is to calculate the shielding environment of receiver using image processing and apply it to GPS positioning. The proposed method, firstly, performs a preprocessing to reduce the effect of noise on images. Next, it uses hough transform to detect the outline of building roofs and determines mask angles and permissible azimuth range. Then, it classifies the satellites according to the condition using the image processing results. Finally, base on point positioning, it computes the receiver position by applying a weight model that assigns different weights to the classified satellites. We confirmed that the RMSE (Root Mean Square Error) was reduced by 2.29m in the horizontal direction and by 15.62m in the vertical direction. This paper showed the potential for the hybrid of GPS positioning and image processing technology.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.799-804
• /
• 2016

Broadband powerline communication (BPLC) uses distribution lines as a medium for achieving effective bidirectional data communication along with electric current flow. As the material characteristics of power lines are not good at the communication channel, the development of power line communication (PLC) systems for internet, voice, and data services requires measurement-based models of the transfer characteristics of the network suitable for performance analysis by simulation. In this paper, an analytic model describing a complex transfer function is presented to obtain the attenuation and path parameters for a multipath power line model. The calculated results demonstrated frequency-selective fading in multipath channels and signal attenuation with frequency, and were in good agreement with the experimental results. Inductive coupling units are used as couplers for coupling the signal to the power line to avoid physical connections to the distribution line. The inductance of the ferrite core, which depends on the frequency, determines the cut-off frequency of the inductive coupler. Coupling loss can be minimized by increasing the number of windings around the coupler. Coupling efficiency was improved by more than 6 dB with three windings compared to the results obtained with one winding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.82-89
• /
• 2011

The Proxy Mobile IPv6 is a network-based localized mobility management protocol. In the PMIPv6, Mobile Nodes are topologically anchored at a Local Mobility Anchor, which forwards all data packets for registered Mobile Nodes. Since all data packets destined for the Mobile Nodes a1ways traverse the Mobile Nodes's Local Mobility Anchor, the LMA might be bottleneck and the end-to-end de1ay are increased. Therefore, in this paper, we proposed an enhanced Route Optimization scheme in Multiple Local Mobility Anchors environment. In order to rapid1y detect Route Optimization, we designed Domain Information Table in Mobility Access Gateway. Furthermore, we use Correspondent Binding Cache in Local Mobility Anchor to maintain Route Optimization information during Mobile Nodes's handover. To solve packet loss and reodering problems during handover, we propose a new buffering and forwarding scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2358-2364
• /
• 2010

Recently, In the wireless sensor network, a study which guarantees integrity of not only data gathered from sensor node but also energy consumption of it is now going on. However, the existing study cannot guarantee data integrity and overhead of cluster head which merges data from sensor node. This paper proposes multi-path hash chain technique which guarantees integrity of merged data and reduces overhead of cluster head when cluster head merges with data transmitted from sensor node. The proposed technique forms multi-hash chain dividing main-path and assistance-path to guarantee data integrity of cluster head, when merges data. The assistance-path, which is used when main-path is not, supports integrity of sensor node while minimizing overhead of cluster head when sensor node is authenticate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5559-5564
• /
• 2015

A variety of routing protocols targeted specifically at mobile ad-hoc network environments have been developed. Mobile ad-hoc network is a self-organizing temporary network, operating without the aid of any established wired infrastructure. The proposed protocol supports seamless communication services between the mobile hosts within a mobile ad-hoc network environments. In particular, our protocol makes faster route re-establishment possible by maintaining multiple paths in each mobile host, and also, the protocol provides reliable communication environments. We compare the performance of RWP model with that of LW model. This paper shows delivery ratio with single path and non-disjoint multiple path according to mobility model and node numbers.