• Title/Summary/Keyword: 다적층

Search Result 61, Processing Time 0.037 seconds

A study on the Dynamic Characteristics of Carbon Fibre-Reinforced Plastics Plates (탄소섬유로 강화된 플라스틱 적층 평판의 동특성에 관한 연구)

  • 김찬묵;이호성
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1990.10a
    • /
    • pp.137-142
    • /
    • 1990
  • 본 연구에서는 유한요소법을 사용하여 이방성으로 적층된 평판의 고유모드 를 예측하고, 이론적인 예측의 정확성을 연구하기 위해 사변 단순지지의 다 양한 각도로 적층된 정사각형 CFRP평판의 8번째 진동모드까지 실험적인 결 과와 비교하였다. 이 연구에서 사용된 모든 평판은 중앙면에 대칭이며, 이것 은 Bundling-stretching coupling을 제거하기 위해서이다. 그러나 만일 비대 칭적으로 적층된 평판이라면 이 효과를 포함한 해석이 되어야 할 것이다.

  • PDF

A study on fatigue life of Al 7075/CFRP multilayered hybrid composite materials (Al 7075/CFRP 다적층 하이브리드 복합재료의 피로수명에 대한 연구)

  • 윤한기;김연겸;박준수;이경봉
    • Journal of Ocean Engineering and Technology
    • /
    • v.10 no.4
    • /
    • pp.92-102
    • /
    • 1996
  • In this research, to develope the A1 7075/CFRP multilayered hybrid composites, CRALL(Carbon Reinforced aluminum lamiate) specimens were processed by autoclavecuring system that curing temperature, time, surface pretreatment condition of aluminum were constant. Andthe fatigye life and failure mechanism on CFRP volume fraction and fiber orientation of CRALLspecimens were investigated. A fatigue life was greatly influenced by effect of CFRP fiber volume fraction but it was less effected than those of fiber orientation. The fatigue failure arised from interface delamination of CFRP and aluminum sheet after shear fracture of aluminum layer. The failure mechanism is assumed that the aluminum laminates which divide the CFRP into many thim layers tend to arrest the failure propagation.

  • PDF

Improvement of Mixing Efficiency of Multilamination Micro Mixer Including Recirculation Zone (재순환 공간 추가에 의한 다적층 마이크로 혼합기의 효율 향상)

  • Lee Jong-Kwang;Kim Yong-Dae;Kwon Se-Jin
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.539-540
    • /
    • 2006
  • It is so difficult to small amounts of two or more fluid species into single in microchannel because flows are usually laminar. In this regard multilamination micro mixer including recirculation zone is presented. Alternating feed micro channels make multilamination and converging-diverging channels form recirculation zone. Multilamination with geometric focusing decreases diffusion path ana recirculation zones make vortex. In this paper flow patterns and mixing properties of multilamination micro mixer including recirculation zone were investigated by Computational Fluid Dynamics (CFD). The CFD results provided qualitative information on mixing.

  • PDF

Processing parameter and piezoelectric properties of multilayted piezoelectric actuator (적층형 압전 액튜에이터의 제조 및 압전특성)

  • 김용혁;박수창;최명규;김재호
    • Electrical & Electronic Materials
    • /
    • v.3 no.4
    • /
    • pp.271-278
    • /
    • 1990
  • 본 논문에서는 내부전극 Pt를 갖는 적층형 압전액튜에이터의 제조와 적층수에 따른 압전액튜에이터 압전특성에 대해 조사 연구하였다. 먼저, Dr.blade방법을 사용하여 두께 ~220.mu.m의 PZT green sheet를 제작하였다. green sheet의 밀도는 결합제 양과 외부압력에 대해 크게 의존하였으며 소결체의 밀도는 green sheet의 밀도가 커질수록 더 높게 나타났다. 다음에는 적층수에 따른 압전정수의 변화에 대한 것으로써 압전정수(d$_{33}$)는 PZT세라믹스의 적층수가 증가할수록 매우 크게 증가되었으며 압전정수를 도입하여 계산된 변형량(.DELTA.l/l)은 10층 시편에 대해 2*$10^{6}$V/m의 전계에서 3*$10^{-3}$값을 얻었다. 이와같은 결과로써 적층형 압전액튜에이터는 저전압에서도 큰 변위를 나타내며 따라서 제어장치의 미세작동에 충분히 이용 될 수가 있다.다.

  • PDF

MOCVD를 이용한 자발성장 InAs 양자점의 적층 성장 시 발생하는 파장변화량 제어

  • Choe, Jang-Hui;An, Seong-Su;Yu, Su-Gyeong;Lee, Jong-Min;Park, Jae-Gyu;Lee, Dong-Han;Jo, Byeong-Gu;Han, Won-Seok
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.150-151
    • /
    • 2011
  • 양자점 Laser Diode(LD)는 낮은 문턱전류, 높은 미분 이득을 갖으며 또한 온도변화에도 안정적이기 때문에 광통신분야에서 광원으로 양자점 LD를 사용하기 위한 연구가 계속되고 있다. 양자점은 fill factor가 낮기 때문에 양자점의 밀도를 높이거나 양자점을 적층 성장하여 fill factor를 높인다. 그러나 양자점을 적층 성장하면 각 층간의 응력, 수직적 결합, 전기적인 결합이 생기며 이는 양자점의 전기적, 광학적 특성에 영향을 미친다. 본 연구에서는 metal organic chemical vapor deposition (MOCVD)을 이용하여 InP기판 위에 자발성장 법으로 InAs 양자점을 다주기 성장하였으며 photoluminescence (PL)을 이용하여 광학적 특성을 분석하였다. precursor는 trimethylindium (TMI), trimethylgalium (TMGa), $PH_3$, $AsH_3$를 사용하였으며 carrier gas는 $H_2$를 사용하였다. InAs 양자점은 1100 nm의 파장을 갖는 InGaAsP barrier 위에 성장하였고, InAs와 InGaAsP의 성장온도는 $520^{\circ}C$이며 InAs 양자점 성장시 V/III 비는 3.66으로 일정하게 유지하였다. 그림 1은 양자점 성장시간을 0.11분으로 고정하여 3주기(A), 5주기(B), 8주기(C) 성장한 구조이며 그림 2는 양자점 성장시간을 3주기마다 0.01분씩 줄여가며 3주기는 0.11분${\times}$3(D), 6주기는 0.11분${\times}$3+0.10분${\times}$3(E), 9주기는 0.11분${\times}$3+0.10분${\times}$3+0.09분${\times}$3(F) 으로 성장한 성장구조이다. 각 성장한 시료는 PL을 이용하여 파장과 반치폭을 측정하였다. 그림 3은 양자점 성장시간을 고정한 시료 A, B, C의 PL파장과 PL반치폭 데이터이다. PL파장은 A, B, C 시료 각각 1504 nm, 1571 nm, 1702 nm이며 반치폭은 각각 140 meV, 140 meV, 150 meV이다. PL파장과 반치폭은 각각 3주기에서 6주기로 증가할 때 67 nm, 0 meV 6주기에서 9주기로 증가할 때는 131 nm, 10 meV 증가하였다. 다음 그림4는 양자점 성장시간을 조절하여 성장한 양자점 시료 D, E, F의 PL파장과 PL반치폭 데이터이다. PL파장은 D, E, F 시료 각각 1509 nm, 1556 nm, 1535 nm이며 반치폭은 각각 137 meV, 138 meV, 144 meV이다. PL파장과 반치폭은 각각 3주기에서 6주기로 증가할 때 47 nm, 1 meV 증가하였고, 6주기에서 9주기로 증가할 때는 21 nm 감소, 6 meV 증가하였다. 양자점 성장시간을 고정하여 다주기를 성장하였고 또 3주기마다 양자점 성장시간을 달리하여 다주기를 성장하였으며 PL을 이용해 광학적 특성을 연구하였다. 성장된 양자점의 PL 파장과 PL 반치폭 변화를 통해 적층구조에서 성장 주기가 늘어날수록 양자점의 크기가 증가하는 것을 확인하였고 또한 적층성장을 할 때 양자점 성장시간을 줄임으로써 양자점의 크기 변화를 제어 할 수 있었다.

  • PDF

Bending Analysis of Anisotropic Sandwich Plates with Multi-layered Laminated Composite faces (다적층 복합면재를 갖는 비등방성 샌드위치판의 휨해석)

  • Ji, Hyo-Seon
    • Journal of the Korean Society for Advanced Composite Structures
    • /
    • v.3 no.4
    • /
    • pp.17-26
    • /
    • 2012
  • This study presents a governing equations of bending behavior of anisotropic sandwich plates with multi-layered laminated composite faces. Based on zig-zag models for through thickness deformations, the shear deformation of composite faces is included. All edges of plate are assumed to be simply supported. Results of the bending analysis under lateral loads are presented for the influence of various lay up sequences of antisymmetric angle-ply laminated faces. The accuracy of the approach is ascertained by comparing solutions from the sandwich plates theory with composite faces to the laminated plates theory. Since the present analysis considers the bending stiffness of the core and also the transverse shear deformations of the laminated faces, the proposed method showed higher than that calculated according to the general laminated plates theory. The information presented might be useful to design sandwich plates structure with polymer matrix composite faces.

Investigation of Applicability of Additive Manufacturing Processes to Appropriate Technologies for Developing Countries (개발 도상국들을 위한 적층 제조 공정의 적정 기술 분야 적용성 고찰)

  • Ahn, Dong-Gyu
    • Journal of Appropriate Technology
    • /
    • v.7 no.2
    • /
    • pp.188-195
    • /
    • 2021
  • In recent years, additive manufacturing (AM) processes have emerged as an important manufacturing technology for a multi-item small sized production to lead the 4th industrial revolution. The layer-by-layer deposition characteristics of AM process can rapidly produce physical parts with three-dimensional geometry and desired functionality in a relatively low cost environment. The goal of this paper is to investigate the applicability of AM process to appropriate technologies for developing countries. Through the review of examples of appropriate technology of the AM process, the possibility of a practical usage of the AM process for the appropriate technologies is examined. In addition, significant applications of the AM process to the appropriate technology are introduced. Finally, future issues related to production of physical parts for developing countries using the AM process are discussed from the viewpoint of the appropriate technology.

Quantitative Analysis of 3D Printing Layered Shape according to the Flatness of Construction Surface (시공표면평탄에 따른 3D 프린팅 적층형상 정량분석)

  • Park, Jin Su;Kim, Kyung Taek
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.42 no.2
    • /
    • pp.257-261
    • /
    • 2022
  • Additive manufacturing (AM, also known as 3D printing) applied to the construction industry is implemented and verified for various effects since advantages such as high design freedom, improving worker safety, and predictable construction period. However, due to the low maturity compared to the existing technology, studies are underway to solve new problems that occur in the overall of AM technology. In this paper, we confirm the effect of low construction surface flatness on the stacked features in the process of on-site AM construction. In particular, unstable AM features are determined through quantitative analysis by laser scanning, and a construction strategy is proposed for the surface flattening.

Architectural Product and Formwork Manufacture using 3D Printing - Applicability Verification Through Manufacturing Factor Prediction and Experimentation - (3D 프린팅을 통한 거푸집 제조 및 건축 상품 구현 - 제조인자예측과 실험을 통한 적용가능성 검증 -)

  • Park, Jinsu;Kim, kyung taek
    • Korean Journal of Construction Engineering and Management
    • /
    • v.23 no.1
    • /
    • pp.113-117
    • /
    • 2022
  • Additive manufacturing (AM, also known as 3D printing) technology is digitalized technology, making it easy to predict and manage quality and also, have design freedom ability. With these advantages, AM technology is applied to various industries. In particular, a method of manufacturing buildings and infrastructure with AM technology is being proposed to the construction industry. However, the application of AM technology is restricted due to problems such as insufficient history and quality of technology, lack of construction management methods, and certification of manufacturing products. Therefore, the manufacture of architectural products is implemented with indirect AM technology. In particular, it manufactures formwork using AM and injecting building materials to implement the architectural product. In this study, hybrid type material extrusion AM is used to manufacture large-sized formwork and implement building products. Moreover, we identify factors that can predict productivity and economic feasibility in the additive manufacturing process. As a result, design optimization results are proposed to reduce the production cost and time of architecture buildings.

Fabrication of Zirconium Titanate Thin film from Layer-by-Layer Structure of Primitive Oxides prepared by PRTMOCVD (PRTMOCVD 법을 통한 단성분계 산화막의 적층형 구조로부터 Zirconium Titanate 박막의 제조)

  • Song, Byung-yun;Kwon, Yong Jung;Lee, Won Gyu
    • Korean Chemical Engineering Research
    • /
    • v.45 no.4
    • /
    • pp.378-383
    • /
    • 2007
  • A novel fabrication method for the multi-component metal oxides such as zirconium titanate($Zr_xTi_{1-x}O_2$) has been suggested, which would yield the uniform film characteristics and control the film composition at relatively low process temperature. The method has the basic concept that firstly layer-by-layer structure is constructed with the primitive oxide layers, which are components of the desired multi-component oxides, and secondly the film is annealed at appropriate thermal conditions for the transformation to a single-phase multi-component oxides. In this study, PRTMOCVD(pulsed rapid thermal metalorganic chemical vapor deposition) possessing the superior thickness controllability was introduced to prepare $ZrO_2$ and $TiO_2$ thin film for zirconium titanate. Single-phase zirconium titanate thin films have been prepared successfully by the interdiffusion of oxide multilayers having several alternating layers of $ZrO_2$ and $TiO_2$. The Zr/Ti ratio of zirconium titanate could be controlled easily by altering the thickness of $ZrO_2$ and $TiO_2$ thin film.