• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.130.1-130.1
• /
• 2005

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.690-694
• /
• 2008

In this paper, the computation of electromagnetic wave scattering is presented for chaff clouds which is widely used to protect an aircraft. The RCS depends on the wind, the aircraft velocity, and the atmospheric diffusion. It is assumed that the RF chaff is a thin dipole antenna and the RCS is calculated based on the scattering wave theory. The theoretical estimation and the simulation results are compared and shown a good agreement.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.222-225
• /
• 2007

본 논문에서는 항공기가 레이다 감시를 회피하고 미사일의 공격으로부터 효과적으로 대응하기 위한 채프의 RCS 계산 방법에 대해 다루었다. 공중에 투하된 채프의 RCS 값은 바람, 비행체의 속도, 대기확산 속도 등에 따라서 달라진다. 채프를 레이다 사용주파수 대역에서 다이폴 안테나로 가정하고, 다이폴 안테나의 산란특성 분석을 통하여 RCS 값을 예측하였다. 본 논문에서는 다이폴 모델로 계산한 채프의 RCS값을 CST-MWS를 이용하여 계산 하였으며 기존에 소개된 실험값들과 비교하여 유사한 특성을 얻었다.

• Journal of the Korean Magnetics Society
• /
• v.17 no.6
• /
• pp.259-264
• /
• 2007

This paper describes the mathematical modeling method for the static magnetic field signature generated by a magnetic scale model. we proposed the equivalent dipole modeling method utilizing a singular value decomposition technique from magnetic field signatures by magnetic sensors are located special depths below the scale model. The proposed dipole modeling method was successfully verified through comparisons with the real measured values in our non-magnetic laboratory. Using the proposed method, it is possible to predict and analyze static magnetic field distributions at any difference depths generated from the real ships as well as a scale model ship.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.23-32
• /
• 2008

In the VHF range, active antennas are widely used for wideband applications due to their small size. Active antenna consists of antenna elements and amplifiers, which are directly connected to each other. Gain and noise-figure characteristics are very important for good sensitivity performance, because it is located at the front end of a receiving system. In this study, we developed an active dipole antenna with 5:1 bandwidth(100${\sim}$500 MHz), which consists of a dipole antenna and a P-HEMT amplifier. To obtain required performances, the antenna and the amplifier should be designed simultaneously. In order for that, we introduced an equivalent port concept to model the 1-port dipole antenna as an equivalent 2-port system. Using the proposed equivalent port, the performance of the active dipole antenna was simulated by the ADS. In order to measure the gain and noise-figure characteristics of the antenna, we utilized the same concept of the two-port equivalent impedance model. The measurement results for typical gain, NF and VSWR in the required frequency band were 8dBi, 9dB and 1.7:1, respectively. The radiation patterns at the principal planes were same as the typical radiation pattern of a dipole antenna. By comparing the simulation results with measured ones, it is confirmed that the proposed methods works well.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.231-236
• /
• 2008

A method of moments model for the resistive vee dipole has been established. In order to validate the numerical model, an experimental model is built and reflections from the antenna in the feed line are measured. The measured data and the numerical data agree closely validating the numerical model. Based on the numerical model, efficiency of the antenna and the power dissipated in the resistors are analyzed. The results show that the antenna has low radiation efficiency because of the loading resistors and that the resistors near the drive point of the antenna dissipate more power than do the resisters far from the drive point. The results can be used to determine the amount of power that can be accepted by the resistive vee dipole, to determine the power rating of the loading resistors for a desired application, or to estimate the operation range of the antenna.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.43-49
• /
• 2008

Motivated by the Communication Broadcasting Convergence service, various technical approaches are being used to develop more efficient antenna models. This paper proposes a compact mobile antenna which is attachable to a cell phone and is applicable for Communication Broadcasting Convergence. In the design of the antennas for mobile handsets, size reduction is a crucial factor. In this paper, the compactness of a loop antenna is realized by bending a folded-dipole. A short planar dipole is transformed to a twice folded dipole and a loop antenna to produce a larger input resistance. The current distribution of the antenna is the same as a loop antenna, and its radiation patterns are omni-directional. We also analyze the performance of the RFID antenna by exploring the current-induced near field radiation patterns using a electro-optic field mapping system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1612-1619
• /
• 2001

This paper examines the design, implementation characteristics of a folded dipole active integrated antenna. Our goal was to minimize the physical size of RF circuit and its insertion loss, and to make the high frequency tuning easier by directly integrating the ISM(Industrial Scientific & Medical) band power amplifier and antenna. Non-linear model has been used for highly accurate simulation of the power amplifier. The maximum power level was found by using the Load pull method before an impedance matching was achieved. It is found that the total power-added efficiency(PAE) including the driving amplifier was 31.5% and that the transmit power was 13.7 dBm. We also found that the proposed scheme with the smaller antenna as compared with the existing dipole antenna has 23.7 dB total gain including the antenna gain. The suppression of the second harmonic signal to the fundamental signal with respect to the fundamental signal was found to be more than 30 dBc.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.11-18
• /
• 2002

In this paper, the method calculating hydroelastic responses of very large floating structure close to a breakwater in waves is presented. The source-dipole distribution method is used to calculate the generalized radiation problem considering breakwater effects and the diffraction problem is analyzed by using the source-dipole distribution andvelocity potential continuation method. The response of a VLFS is approximated by anexpansion in terms of a free-free beam. Calculated model is a VLFS with 1000m in length in a sea with a straight breakwater. The vertical displacements and bonding moments around a VLFS are calculated by variations for distance between a VLFS and a breakwater and incident wave angle to know the effect of a breakwater.

• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.16-18
• /
• 2005

본 논문은 변압기 내부에서 부분방전에 의한 전자파 시뮬레이션을 위하여 200MHz, 400MHz, 800MHz에 대해서 전자파의 세기 분포를 계산하였다. 하나의 주파수에서는 거리와 세기의 관계가 없는 것으로 보였지만 3개의 주파수를 종합하면 거리와 세기가 관계있는 것으로 평가되었다. 이와 같은 부분방전측정에 알맞은 폴디드 다이폴 센서를 설계하였고 모델 변압기에서 모의 펄스를 사용하여 측정을 하였다.