• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.103-112
• /
• 2008

In this paper we present two databases for two different systems each having novel implementation ideas: a u-Healthcare system with a mobile gateway and MAGI network monitoring system. u-Healthcare system is capturing and monitoring vital sign data without restrictions of location and time using body sensor network and a mobile gateway. MAGI is a system which has a dynamic firewall function and solves problems of existing traffic monitoring tools. In addition to presenting the design principles behind these two systems, we describe the respective database schemas together with detailed information of the data stored within the databases. We will also show and discuss performance measurements and calculations for both systems. Based on the performance data we will discuss the systems' suitability for their intended uses.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.856-865
• /
• 2015

In a high-speed press, numerous moving links are interconnected and each link executes a constrained motion at high speed. As a consequence, high-level dynamic unbalance force and unbalance moment are transmitted to the main frame of the press, which results in unwanted vibration and significantly degrades manufacturing accuracy. Dynamic unbalance force and unbalance moment inevitably transmits high-level vibrational force to the foundation on which the press is installed. Minimizing the vibrational force transmitted to the foundation is critical for the protection of both the operators and the surrounding structures. The whole task should be carried out in two steps. The first step is to reduce dynamic unbalance based upon kinematic and dynamic analyses. The second step is to design and build an optimal vibration isolation system minimizing the vibrational force transmitted to the foundation. Firstly, the dynamic design method is presented to reduce dynamic unbalance force and moment. For this a 3D CAD software was utilized and a computer program was written to compute dynamic unbalance force and moment. Secondly, the design method for vibration isolation system is presented. The method for designing coil springs and viscous dampers are explained in detail.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1214-1218
• /
• 2005

As demands for precision parts are increased, existing methods to fabricate them such as MEMS, LIGA technology have the technical limitations like high precision, high functionality and ultra miniaturization. A micro-stereolithography technology based on $DMD^{TM}$(Digital Micromirror Device) can meet these demands. In this technology, STL file is the standard format as the same of conventional rapid prototyping system, and 3D part is fabricated by stacking layers that are sliced as 2D section from STL file. Whereas in conventional method, the resin surface is cured as scanning laser beam spot according to the section shape, but in this research, we use integral process which enables to cure the resin surface at one time. In this paper, we deal with the dynamic pattern generation and $DMD^{TM}$ operation to fabricate micro structures. Firstly, we address effective slicing method of STL file, conversion to bitmap, and dynamic pattern generation. Secondly, we suggest $DMD^{TM}$ operation and optimal support manufacturing for $DMD^{TM}$ mounting. Thirdly, we examine the problems on continuous stacking layers, and their improvements in software aspects.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.732-737
• /
• 2005

Distal 3D Real Object Duplication System(RODS) consists of 3D Scanner and Solid Freeform Fabrication System(SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and a industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer(SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. Also, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Multi-Laser Sintering(SMLS) process and 3-axis dynamic Focusing Scanner for scanning large area instead of the existing $f\theta$ lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, scan spacing. Now, this study is in progress to eveluate the effect of experimental parameters on the sintering process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3563-3570
• /
• 2010

MAC protocol has been studied for reducing energy consumption in wireless sensor networks. The overhearing and idle In the existing asynchronous MAC Protocol will occur due to unnecessary energy consumption. In this paper, to solve these problems, the Preamble to change the structure of the destination address, the Preamble of the end times, the data including the length of the Preamble and Data Overhearing reduce the length of the Check Interval Data generated according to the presence of the Dynamic Value dynamically adjustable by changing the DPL (Dynamic Preamble Length)-MAC protocol was proposed. Moreover, the existing asynchronous MAC protocol of wireless sensor networks and DPL-MAC protocol proposed in this paper to simulate the energy consumption and latency were assessed in terms of comparative analysis.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.105-112
• /
• 2003

Diode rectifier which can't be controlled output voltage and phase control converter as AC/DC converter have low power factor and harmonics of lower order in the line current. In this paper, three phase PWM(Pulse Width Modulation) AC/DC boost converter is studied to solve these problems. The characteristics of a proposed converter are to control the phase of current without current sensor as a very simple control algorithm using circuit parameters only and to apply sinusoidal PWM method with fixed switching frequency due to a difficult design of input filter and switching device. We simulate for the proposed algorithm that high power factor is achieved and DC link voltage has fast dynamic response without ripple in rectifying and regenerating operation. As a result of experiment with circuit parameter(inductor, capacitor) decided in simulation, the proposed converter had high power factor and reduction of low order harmonics as against diode rectifier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.963-971
• /
• 2016

This paper is a research of gaze analysis for measuring task switching behavior at multiple windows in GUI of windowing system. Previous methods that define area of interest for categorizing gaze had difficulties to define dynamic content that disappears or changes over time. On the other hand, this study suggests a new method to categorize gaze that defines Area of interest in a unit of window during the eye tracking experiment. In this paper, we constructed the conception of WOI(Window of Interest) in GUI of windowing system. Therefore, we developed a system using an eye tracker device and implemented a number of experiments. In addition, we analyzed the number of task switching and proportion of watched content. The method in the study comprehend from previous researches as it can measure and analyze the multi-tasking behaviors using multiple numbers of windows.

• The KIPS Transactions:PartD
• /
• v.10D no.3
• /
• pp.427-438
• /
• 2003

In a data warehouse, users typically search for trends, patterns, or unusual data behaviors by issuing queries interactively. The OLAP range-sum query is widely used in finding trends and in discovering relationships among attributes in the data warehouse. In a recent environment of enterprises, data elements in a data cube are frequently changed. The problem is that the cost of updating a prefix sum cube is very high. In this paper, we propose a novel algorithm which reduces the update cost significantly by an index structure called the Δ-tree. Also, we propose a hybrid method to provide either approximate or precise results to reduce the overall cost of queries. It is highly beneficial for various applications that need quick approximate answers rather than time consuming accurate ones, such as decision support systems. An extensive experiment shows that our method performs very efficiently on diverse dimensionalities, compared to other methods.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.279-286
• /
• 2007

The need of contents adaptation in ubiquitous environments is growing to support multiple target platforms for 3D graphics contents. Since 3D graphics deal with a large data set md a high performance, a service adaptation for context changing is required to manipulate graphics contents with a more complicated method in multiple devices such as desktops, laptops, PDAs, mobile phones, etc. In this paper, we suggest a new notion of service adaptation middleware based on service rendering algorithm, which provides a flexible and customized service for user-centric 3D graphics contents. The service adaptation middleware consists of Service Adaptation(SA) for analyzing environments and Service Rendering(SR) for reconfiguring customized services by processing customized data. These adaptation services are able to intelligently and dynamically support the same computer graphics contents with good quality, when user environments are changed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.5
• /
• pp.401-406
• /
• 2008

Recently, portable magnetic sensors with high sensitivity are strongly required for various applications such as biosensor, nondestructive testing and directional sensor. A novel magnetic sensor system was developed by utilizing giant magnetoimpedance(MI) effect of soft magnetic ribbons. The sensor system consists of sensing head of $Co_{66}Fe_{4}Si_{15}B_{15}$ ribbon having asymmetric MI characteristics through exchange coupling produced by field-annealing in open air and circuit for signal processing. The sensor system showed almost linear characteristics in dynamic range of $-1\;Oe\;{\sim}\;1\;Oe$ and sensitivity of 10.5 V/Oe. The sensor was applicable to nondestructive testing system to detect defects in wire ropes.