• Tribology and Lubricants
• /
• v.34 no.3
• /
• pp.75-83
• /
• 2018

Microturbomachinery (< 250 kW) using gas foil bearings can function without oil lubricants, simplify rotor-bearing systems, and demonstrate excellent rotordynamic stability at high speeds. State-of-the-art technologies generally use bump foil bearings or leaf foil bearings due to the specific advantages of each of the two types. Although these two types of bearings have been studied extensively, there are very few studies on leaf-bump foil bearings, which are a combination of the two aforementioned bearings. In this work, we illustrate a simple mathematical model of the leaf-bump foil bearing with leaf foils supported on bumps, and predict its static and dynamic performances. The analysis uses the simple elastic model for bumps that was previously developed and verified using experimental data, adds a leaf foil model, and solves the Reynolds equation for isothermal, isoviscous, and ideal gas fluid flow. The model predicts that the drag torques of the leaf-bump foil bearings are not affected significantly by static load and bearing clearance. Due to the preload effect of the leaf foils, rotor spinning, even under null static load, generates significant hydrodynamic pressure with its peak near the trailing edge of each leaf foil. A parametric study reveals that, while the journal eccentricity and minimum film thickness decrease, the drag torque, direct stiffness, and direct damping increase with increasing bump stiffness. The journal attitude angle and cross-coupled stiffness remain nearly constant with increasing bump stiffness. Interestingly, they are significantly smaller compared to the corresponding values obtained for bump foil bearings, thus, implying favorable rotor stability performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.936-941
• /
• 2001

This paper deals with the design of oil-tree motor-driven two-stage centrifugal compressor supported by air-lubricated multi-leaf foil bearings. The design of this compressor is performed, based upon prediction of critical speeds, load capacity, and stability. It is demonstrated in this paper that multi-leaf foil bearings can be adopted to satisfactorily support this centrifugal compressor.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.177-185
• /
• 2000

The characteristics of multi-leaf feil bearing are investigated. The Foil bearing is preloaded and has several leaf foils modeled by curved beams. An analysis of the air foil bearing was performed, considering effects of foil deflection and compressible lubrication equation simultaneously. A parametric study shows that the number of foils significantly affect the static characteristics of air foil bearings and describes what the minimum film thickness means. The results include pressure profile, load capacity, dimensionless torque and minimum film thickness in the foil bearing.

• Tribology and Lubricants
• /
• v.17 no.4
• /
• pp.290-296
• /
• 2001

Lift-off means that the rotating journal surface separates from the leaf surface in an air-lubricated multi-leaf foil journal bearing. Lift-off builds up minimum film thickness which will provide load capacity between leaves and journal. In this paper an analysis of air-lubricated multi-leaf foil journal bearing was performed with effects of multi-leaf foil deflection and compressible lubrication equation simultaneously. Minimum film thickness built up versus journal speed predicts the lift off characteristics and these results will be useful in designing and selecting the proper speed of the air-lubricated multi-leaf foil journal bearing.

• The Journal of the Korean bone and joint tumor society
• /
• v.9 no.1
• /
• pp.52-60
• /
• 2003

Purpose: To analyse their end results and also to differentiate the single or multiple giant cell tumor(GCT) of tendon sheath in hand. Materials & Methods: Total 21 cases with GCT of tendon sheath in hand were treated surgically and analyzed their end results with clinically, radiologically and pathologically to allowed for average 16 months after surgical excision. Results: The finger flexor tendons, especially on index and ring finger, involving distal interphalangeal joint and mid-phalanges in fourth decades (average age of 47 years old) were frequently involved, and the mass was not exceed than 2 cm in size, fixed on tendon sheath with rubbery hard tenderness but rare bony involvements except 4 cases of bony erosion and cortical perforation. The three cases with multiple GCT of hand was also combined with familial hypercholesterolemia, and are commonly involved the extensor tendons as well as achilles tendons bilaterally, treated with partial excision because of multiplicity. Average 16 months after surgical excision for single GCT cases was followed and showed the recurrence in 3 cases(3/18,16.7%), treated with wide excision. The single and multifocal GCT are similar in pathologic changes but different soft tissue tumors in their pathogenesis, treatment and prognosis. Conclusion: Incomplete excision of GCT of tendon sheath in hand are thought to be the cause of recurrence, especially in cases with incomplete lesional excision, in multilobular and bony involvement etc. So careful wide excision is necessary to prevent the recurrence.