• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.59-62
• /
• 2007

In this paper, we composed solar generation system with multi-phase interleaved boost converter Solar generated voltage is low, so it has need of the boost power conversion device for supply power to normal load. The multi-phase interleaved boost converter is easy to boost voltage and it can be reduced both input current ripple and output voltage ripple because it is composed with multi-phase. We simulated and tested multi-phase interleaved boost converter applied three-phase.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.211-217
• /
• 2009

The numerical program has been developed for the purpose of the complicate geometries application using CIP method. The non-staggered, non-orthogonal, and unstructured grid system can be also used for the various geometries in the program. For validating CIP solver, the lid-driven cavity flow and solitary wave propagation flow are carried out. Test results show a good agreement with the verified results. The dynamic solver was used for the behavior of moving body. Interface process between the two solvers is introduced. The research was performed on the flow problem around torpedo and log and the flow problem in a tank in order to analyze the three phase flow problem Although the comparison to the verified results was not quantitatively performed, the trend of the results was reasonable.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.145-150
• /
• 2009

In this study, characteristics of microwave and convective drying are studied by using a multiphase porous media model. Temperature and moisture profiles for hot-air convective heating and microwave heating of 1-D porous media with varying time and space are numerically investigated. This result shows the microwave drying method is more effective than the convective drying method. Comparing to convective drying, microwave drying can increase temperature and evaporation rate significantly since microwave generates internal heat and increases internal pressure, which results in moisture movement toward the surface on which moisture is vaporized.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.6
• /
• pp.25-44
• /
• 1973

The please relation between motive force and result is reviewed in view point of the correlation function as well as the redundancy in a continuous signal which permits the sampled treatment. A new correlation function (to be named Time Dependent Correlation Function) which is a functon of time, is defined in order to indicate the variation of the correlation between two signals. As application a phase looked loop is analysed which shows the increase of correlation between input signal and output signal of the loop after the application of the input signal. Finally again the T.D.Correlation Function method is used to show how the polyphase envelope detection-method is justifiable by this method.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.280-287
• /
• 2014

In this paper, the numerical simulation of the gas-liquid flow in a cylinder cyclone separator is performed to investigate the flow characteristics using a commercial software, FLUENT, which solves the Reynolds-averaged Navier-Stokes(RaNS) equations. First, a single-phase flow with water in a gas-liquid cylinder cyclone(GLCC) separator is simulated and compared with the experiments(Farchi, 1990) and numerical simulations(Erdal, 1997). Then, the characteristics of the multi-phase flow for water-air, mud-only, and mud-air cases are discussed in the view point of the feasibilities for a mud handling system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.5
• /
• pp.67-72
• /
• 1997

The purpose of this study os to investigate how the natural gas in fuel blend influences the polutant emission of diesel engine. Four stroke cycle single cylinder engine is used for this experiment and four kind of fuel blends were made. Fuel blends show four different torque ratios between diesel oil and natural gas, which are 4 : 0. 3 : 1, 2 : 2 and 1 : 3. The constituents of exhaust gases of engine are analyzed for every fuel blend. The experimental results say that the mixing of natural gas into diesel fuel is an very effective way to reduce the amount of soot in the exhaust gas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.245-249
• /
• 2005

The numerical simulation of a two-phase flow In a discrete fracture network model is presented in this paper, The purpose of this work is to consider density-driven flows induced by the density difference between hot autochthonous heavy brines and injected cold water. Mechanical consequences of high pressure waves on the fracture permeability and heat exchanges between fluids and rock matrix are neglected in this study. The finite volume method is employed to discretize spatially and the system is solved by using an IMPES(Implicit Pressure-Explicit Saturation) scheme. In order to solve the strong non-linearity of the system, the Newton-Raphson algorithm is used. The well-known Buckeley-Leverett problem is adapted to validate results calculated from the model and a relatively good agreement is obtained.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.88-95
• /
• 2010

In this paper, the variation of phase current and input current ripple of interleaved boost converter at DCM for fuel cell applications are theoretically analyzed. Also, based on the detailed analysis, numerical formula of input current ripple expressed in rising and falling slope magnitude, D, and $D_A$ is proposed. In order to verify proposed formulas, simulation and experimental results are compared with theoretical data and validity of proposed theory is established.

• 기계와재료
• /
• v.24 no.1
• /
• pp.14-25
• /
• 2012

우리나라는 지난 10여 년간 조선산업 분야에서 굳건한 세계 1위의 자리를 지켜왔으나, 미국, 노르웨이, 독일, 프랑스와 같은 해양 분야 선진국들은 30여 년 전부터 근해, 천해를 비롯해 심해에 부존되어 있는 가스 및 원유 채굴에 사용되는 해양 플랜트 기술 개발에 집중하여 왔다. 우리나라는 최근 세계적인 해양 자원 개발에 부응한 해양 플랜트 산업의 확대에 발맞추어 세계 최고의 선박 및 해양 구조물 건조 기술을 확보한 조선사를 비롯해 정부, 연구소, 산업체에서 심해저 플랜트 기자재 및 설치 기술 개발에 박차를 가하고 있다. 특히 심해저에서 채굴된 다상의 가스 및 원유를 처리하고 정제하는 심해저 플랜트 공정처리장비의 경우는 고도의 기술력을 요구할 뿐만 아니라 심해저 플랜트 산업의 보수적이고 발주자 위주의 시장구조로 인해, 설령 기술력을 갖추고 있다 하여도 세계 시장 진입이 매우 어려운 실정이다. 따라서 본 연구에서는 심해저 플랜트의 주요 공정처리장비의 기술 현황에 대해 고찰하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.28-30
• /
• 2007

For the design of the voltage regulation module(VRM) having a high performance, current sensing is one of the most important functions. In this paper, three different methods for sensing the current in the multi-phase synchronous buck converter are analyzed considering the efficiency, accuracy and cost. The experiments are performed for the three current sensing methods to verify the theoretic analysis.