• Resources Recycling
• /
• v.16 no.5
• /
• pp.65-70
• /
• 2007

This study presents the findings of the experiments that were conducted on single- and multi-stage solvent extractors using the stimulus-response method, with the am of identifying flow characteristics of the material inside the mixer-settler-type extractor. The results of this study show that the response characteristics of a single-stage mixer is the same as that of a completely stirred tank reactor (CSTR), and that the lag time of a mixer-settler-type extractor increases with the number of its extraction stages. The experimental data for the single- and multiple-stage extractors were analyzed using K-RTD, a response analysis program, to obtain a retention time distribution (RTD) model of one-stage and four-stage extractors. The correlation coefficient between the calculated values and the experimental data was 0.963 for the one-stage extractor and 0.995 for the four-stage extractor, showing quite a good correlation.

• The Korean Journal of Applied Statistics
• /
• v.36 no.4
• /
• pp.337-347
• /
• 2023

Sampling designs often use stratified sampling, where elements or clusters of the study population are divided into strata and an independent sample is chosen from each stratum. The stratification strategy consists of stratification and sample allocation, which are important issues that are repeatedly considered in survey sampling. Although a stratified multistage sample design is often used in practice, the literature tends to discuss simple sampling in terms of stratum effects or stratum efficiency. This study examines an existing stratum efficiency measure for two-stage sampling and further proposes additional stratum efficiency measures using the design effect model. The proposed measures are used to evaluate the stratification strategy of the sample design for high school students of the 4^th Korean National Environmental Health Survey (KoNEHS).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.91-99
• /
• 2007

It was intended in this study to investigate the effects of various parameters on the chemical reaction or mass transfer yield in a tubular-type nuclear waste treatment equipment. Since such equipments, as a tubular reactor, multistage solvent extractor, and adsorption column, accompany chemical reaction or mass transfer along the fluid-flowing direction, mathematical modeling for each equipment was carried out first. Then their behaviors of the chemical reaction or mass transfer were predicted through computer simulations. The inherent major parameters for each equipment were chosen and their sensitivities. affecting the reaction or mass transfer yield were analyzed. For the tubular reactor, the effects of axial diffusion coefficient and reaction rate constant on the reaction yield were investigated. As for the multistage solvent extractor, the backmixing of continuous phase and the distribution coefficient between fluid and solvent were considered as the major parameters affecting the extraction yield as well as concentration profiles throughout the axial direction of the extractor. For the adsorption column, the equilibrium constant between fluid and adsorbent surface, and the overall mass transfer coefficient between the two phases were taken as the major factors that affect the adsorption rate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1094-1100
• /
• 2014

TEvaporator is key component in food, seawater distillation and waste water treatment system, which is basically to concentrate the raw liquid by evaporating the pure water under vacuum condition. The liquid concentration is performed through the membrane, electro-dialysis and evaporation. In this study, only the evaporating type was treated for evaluating the economic analysis with the various operating conditions. The results of this study showed that the performance of the OT-MSF desalination system is increased with decreasing the temperature difference between the neighboring evaporators, which means that the number of evaporators is increased, under the determined design conditions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.4
• /
• pp.15-27
• /
• 1994

주거환경에서 거주자의 '시각만족(residents' satisfaction with visual appearance)은 더 큰 추상적 개념인 '주거만족'(residents' housing satisfaction)과의 밀접한 인과적 관련(Francescato et. al., 1979) 때문뿐만 아니라 인간 기본 욕구 중의 하나인 미적 욕구의 충족과 관련되어 있다는 점(Chin, 1991)에서도 중요시 되어야 할 이론적 개념이다. 본 연구에서는 거주자의 시각만족을 종속지표로 보고, 다양한 영향 가설변수들과의 인과 적 관련도를 경로분석(path analysis)을 통해 검증하고 있으며, 어떤 변수 가 어떤 이유(경로)로 또는 얼마만한 크기로 거주자의 시각만족에 영향을 주는 가가 중점적으로 토의된다. 한국의 6개 대단위 주거단지로부터 다단 계표집 방법과 설문면담 방법을 통해 646명의 응답이 수거되었다. 분석의 첫 단계로써, 다수의 설문문항을 본 연구의 가설 변수로 집약하기 위한 요 인분석(factor analysis)이 사용되었고, 요인 분석으로부터 추출된 변수들간 의 인과적 관련도를 검증하기 위해 최종적으로 경로분석이 사용되었다. 본 연구의 결과를 요약해 볼 때, 본 연구의 가설 변수 대부분이 최종 종속변 수인 거주자의 '시각만족'에 유의한 인과 영향을 보이는 것으로 나타났으 며, 구체적으로 '시각적 무질서'(visual disorder), '시각적 단조로움'(visual monotony), '단지 과밀감'(development crowding) 등이 부정적 영향을, '시 각적 매력'(visual attractiveness)과 '인근 자연녹지의 존재'(presence of nearby natural environment)등이 긍정적 영향을 미치는 것으로 파악되었 다. 그 외에도 '옥외공간이용 편리'(outdoor or recreation convenience)와 ' 이웃만족'(satisfaction with neighbors), 그리고 '주거환경 유형'(building type, building arrangement type)등도 유의한 인과적 관련을 보이므로써, 기존 문헌들이 제시하고 있는 것보다 훨씬 다양한 변수들이 다양한 경로를 통해 거주자 시각만족의 영향인자가 될 수 있는 가능성을 제시하고 있다. 가설 변수의 하나인 '길찾기의 난이 정도'(difficulty of way-finding)와 종 속변수간에 유의한 관련도가 나타나지 않은 이유로 길찾기 변수가 '시각만 족'보다는 거주자의 '안전만족'(safety)과 관련된 변수일 가능성도 아울러 지적되었다. 본 연구의 결과로부터, 주거 계획 및 설계분야 그리고 추후 관 련 연구 분야를 위한 여러 제안들이 제시되었다.

• Journal of Environmental Impact Assessment
• /
• v.29 no.3
• /
• pp.157-181
• /
• 2020

Sediments from rivers, lakes and marine ports serve as end points for pollutants discharged into the water, and at the same time serve as sources of pollutants that are continuously released into the water. Until now, the contaminated sediments have been landfilled or dumped at sea. Landfilling, however, was expensive and dumping at sea was completely banned due to the London Convention. Therefore, this study applied contaminated sedimentation soil of 'Royal Palace Livestock Complex' as soil purification method. Soil remediation methods were applied to pretreatment, composting, soil washing, electrokinetics, and thermal desorption by selecting overseas application cases and domestically applicable application technologies. As a result of surveying the site for pollutant characteristics, Disolved Oxigen (DO), Suspended Solid (SS), Chemical Oxygen Demand (COD), Total Nitrogen (TN), and Total Phosphorus (TP) exceeded the discharged water quality standard, and especially SS, COD, TN, and TP exceeded the standard several tens to several hundred times. Soil showed high concentrations of copper and zinc, which promote the growth of pig feed, and cadmium exceeded 1 standard of Soil Environment Conservation Act. In the pretreatment technology, hydrocyclone was used for particle size separation, and the fine soil was separated by more than 80%. Composting was performed on organic and Total Petroleum Hydrocarbon (TPH) contaminated soils. TPH was treated within the standard of concern, and E. coli was analyzed to be high in organic matter, and the fertilizer specification was satisfied by applying the optimum composting conditions at 70℃, but the organic matter content was lower than the fertilizer specification. As a result of continuous washing test, Cd has 5 levels of residual material in fine soil. Cu and Zn were mostly composed of ion exchange properties (stage 1), carbonates (stage 2), and iron / manganese oxides (stage 3), which facilitate easy separation of contamination. As a result of applying acid dissolution and multi-stage washing step by step, hydrochloric acid, 1.0M, 1: 3, 200rpm, 60min was analyzed as the optimal washing factor. Most of the contaminated sediments were found to satisfy the Soil Environmental Conservation Act's standards. Therefore, as a result of the applicability test of this study, soil with high heavy metal contamination was used as aggregate by applying soil cleaning after pre-treatment. It was possible to verify that it was efficient to use organic and oil-contaminated soil as compost Maturity after exterminating contaminants and E. coli by applying composting.

• Journal of Nutrition and Health
• /
• v.9 no.1
• /
• pp.76-83
• /
• 1976

The aims of this study are, 1) to describe the attitudes of the community towards each food item and 2) to provide the information necessary for the solution of nutritional problems due to the different food intake of the community. This study is based on the Food Consumption Survey conducted by the Ministry of Health and Social Affairs in a series of National Nutrition Survey in August, 1973. The sample included 8 communities, in which 160 households were selected at random for this study. The procedures and methods used in this study to compute the acceptability index were adopted from the study of H. Toyokawa, University of Tokyo. Food attitudes of the sample communities are clear in terms of the mean acceptability index which is presented in Table 3. The following order is indicative of the relative strength of acceptability of the respective food items: 1. Seasonings (-1.20) 2. Oils and fats (-1.12) 3. Pulses(- .60) 4. Processed vegetables (- .45) 5. Seaweeds (- .32) 6. Sugars (- .19) 7. Fresh vegetables (- .15) 8. Rice (- .13) 9. Cereals and grain products (- .07) 10. Starchy roots (- .06) 11. Fresh fish and shells (.44) 12. Processed fish and shells (.56) 13. Eggs (1.06) 14. Fruits (1.26) 15. Meats and poultry (1.33) 16. Milk and milk products (2.87) There are highly significant difference in the acceptability index between food items and the mean intake of rice, cereals and grain products, pulses, starchy roots, processed vegetables, fruits, sugars, seaweeds, seasonings, meats and poultry, eggs, fresh and shells, and oils and fats between the communities at the .01 level of significance.