• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.35.2-35.2
• /
• 2005

• 한국항공우주학회지
• /
• 제36권12호
• /
• pp.1180-1185
• /
• 2008

다단 연소를 수행하는 위성 발사체 액체 로켓 엔진의 예연소기 성능을 모사한 in-house code가 개발되고 검증되었다. CEA (Chemical Equilibrium with Applications)의 해석 알고리듬을 바탕으로 하여 예연소기의 화학 반응을 모델링 하였고, gas dynamics 모델링과 연동시켜 예연소기의 성능을 모사하였다. CEA와 비교한 결과 아주 높거나 아주 낮은 O/F ratio를 제외하고는 계산 값들이 거의 일치함을 보여 주었다. 또한 실제 엔진 (RD-8)의 성능곡선과 비교한 결과 개발된 in-house code의 계산 값들이 타당한 범위 내에서 모사되었고, 정상상태에서는 거의 비슷한 결과 값을 보였다.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.76-82
• /
• 2007

This paper described the effect of the multiple injections on the stability of combustion and emission characteristics in a direct injection diesel engine at various operating conditions. In order to investigate the influence of multiple injections in a diesel engine, the fuel injection timing was varied one main injection and two pilot injections at various conditions. The experimental apparatus consisted of DI diesel engine with four cylinders, EC dynamometer, multi-stage injection control system, and exhaust emissions analyzer. The combustion and emission characteristics were analyzed for the main, pilot-main injection, pilot-pilot-main injection strategies. It is revealed that the combustion pressure was smoothly near the top dead center and the coefficient of variations is reduced due to the effect of pilot injection. Also, $NO_x$ emissions are dramatically decreased with pilot injection because the decrease of rate of heat release. However, the soot is increased at early pilot injection and main injection.

• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.222-229
• /
• 2005

공기 중의 이산화탄소가 10% 함유된 연소가스를 5단의 다단 농축 막분리 시스템을 이용하여 분리하는 것을 Aspen plus와 Excel을 이용하여 모사하였다. 분리된 이산화탄소의 농도는 99% 이상, 이산화탄소 제거 효율을 90% 이상으로 하였다. 이때 최적화 변수를 각 단의 압력, 각 단에서의 잔여물 농도로 하였고 각 단의 막 면적의 합과 막 분리시스템의 장치비와 운전비를 고려한 목적함수를 제안하여 최적화를 행하였다. 최적화 결과, 기존 설계에 비해 막 면적 및 총괄 소요비용을 절감할 수 있었으며, 이를 바탕으로 다단농축 막분리 시스템의 설계지침을 얻었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.97-100
• /
• 2011

액체로켓엔진의 점화는 그 시퀀스가 대단히 중요하며 시퀀스에 따라 엔진에 손상이 갈 수도 있다. 따라서 시동 시 hard start가 일어나지 않도록 많은 연구가 이루어지고 있다. 액체로켓의 점화 방법은 점화성 연료를 많이 사용하며 그 중 TEAL 역시 대기 중의 산소과 접촉하면 발화되는 자연발화 물질이다. TEAL을 사용하는 점화방법은 케로신-액체산소 엔진의 주요한 점화방식 중의 하나이나 아직까지 국내에서는 다단연소사이클 산화제 과잉 예연소기에 TEAL을 사용하여 점화 시험을 실시한 경험이 거의 없기 때문에 본격적인 시험에 앞서 이를 예측해 보고자 한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.244-249
• /
• 2004

Experiments were performed to investigate the characteristics of combustion of 7MW-3 air stages combustion system for a heavy oil firing boiler. Several fuel nozzles were developed for the purpose of lowering pollutions in another institute and ${\Phi}$-jet nozzle among them was equipped to the combustion system. A variety of combustion phenomena were observed as air stage ratio, air fuel ratio and load are changed for each nozzle. Main combustion characteristics are shape of flame, NOx and CO generations, smoke scale number. Through lots of adjustments, the combustion system reaches such goals as the low NOx of 160 ppm, CO of 300 ppm corrected at $O_2$ of 4% and dust of 150 mg/Sm3.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.149-154
• /
• 1999

The influences of air staging on NOx emission and burnout of coal flames were investigated using 1MWth combustion test facility. The experiments showed that variation of overall excess air ratio led to a relatively higher NOx emission level for ${\lambda}=1.2.$ When air staging was applied to the combustion air, it was confirmed that a fuel rich primary combustion zone was established and unburned char was burened completely by mixing with the staged air supplied radially around the flame. The NOx emissions were redued by increasing the staged air flow rate, and staging air was suggested to be more than 40% of the total combustion air for the substantial NOx reduction.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.65-74
• /
• 2003

Air pollution included Nitric Oxide(NOx) from heating boilers is increased by pursuing better life. Development of low NOx emission boiler is strongly needed. However commercial burner for heating boiler is also asked to be thermal efficient and low-cost manufactuable in addition to low NOx emission. Small space for combustor including burner is usually allowed. In this study, parametric study of compact low NOx burner for heating boiler was done using numerical analysis and experiments. Commerical computational fluid dynamic(CFD) program named CFX 5-6 was used for numerical analysis of low NOx burner using turbulent diffusion flame. Comparison of outlet NO and outlet temperature under various equivalence ratio and fuel flow rate was performed between experiment and numerical analysis.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.105-112
• /
• 2002

The objective of this research is to determine generally applicable design principles for the development of internally staged combustion devices. Utilizing a triple annulus combustor, air staged commercial propane flame configuration are studied. For this triple air staged combustor, the angular momentum weighted by it's swirl number and air distribution ratio was observed to be the critical criteria. An internal recirculation zone which develops on the centerline of the flame immediately downstream of the burner entraps the fuel into a fuel rich eddy. Then sufficient heat must he transferred from the flame via radiation to the chamber heat transfer surfaces, such that when the second air is introduced, peak flame temperatures are suppressed. It is experimentally found out that the total NOx emission level in this type of burner is lower than 0.75g/kg.

• 연구논문집
• /
• 통권27호
• /
• pp.101-108
• /
• 1997

The characteristics of combustion and emissions in multi-staged oil burner have been experimentally studied for the various range of equivalence ratios, drop sizes and fuel formulations. Malvern system was used to measure droplet size of fuel. Light fuel oil and light fuel oil doped with pyridine($C_5H _5N$) were used to investigate the effects on fuel NOx emission. The emissions of NO and CO in exhaust gas and the flame temperatures were measured by the gas analyzer and thennocouples. NOx emissions were increased by increasing the excess air ratio (range:$lambda=1.1-1.4$) or decreasing the SMD of droplet in single-staged burner. In comparison with the single-staged burner, the emission of NOx in multi-staged burner was reduced by 50% but CO emission was slightly increased. It is found that multi-staged burner has a good capability in reducing thermal NOx resulting from the distributed heat release rate and lower flame temperature in fuel-rich and fuel-lean combustion zone. Moreover, the fuel NOx emission of the multi-staged burner is lower than that of single-staged burner, because multi-staged burner has fuel rich zone where fuel N is converted to $N_2$ more than NO. In 3-staged burner, the percentage of each stage combustion air have strong influence on emission characteristics. It is also found that NOx emission can be reduced by decreasing inner and outer air percentage or increasing middle air flow rate and CO emission is vice versa.