• Resources Recycling
• /
• v.16 no.5
• /
• pp.65-70
• /
• 2007

This study presents the findings of the experiments that were conducted on single- and multi-stage solvent extractors using the stimulus-response method, with the am of identifying flow characteristics of the material inside the mixer-settler-type extractor. The results of this study show that the response characteristics of a single-stage mixer is the same as that of a completely stirred tank reactor (CSTR), and that the lag time of a mixer-settler-type extractor increases with the number of its extraction stages. The experimental data for the single- and multiple-stage extractors were analyzed using K-RTD, a response analysis program, to obtain a retention time distribution (RTD) model of one-stage and four-stage extractors. The correlation coefficient between the calculated values and the experimental data was 0.963 for the one-stage extractor and 0.995 for the four-stage extractor, showing quite a good correlation.

• The Korean Journal of Applied Statistics
• /
• v.32 no.4
• /
• pp.643-652
• /
• 2019

We propose a method for sample size determination using design effect formulas when a sample is resigned for a repeated survey. The proposed method enables the determination of the sample size by incorporating the impact of various design components to the sampling error through design effect formulas that are applicable under multistage sampling design and stratified multistage sampling designs.

• The Korean Journal of Applied Statistics
• /
• v.36 no.4
• /
• pp.337-347
• /
• 2023

Sampling designs often use stratified sampling, where elements or clusters of the study population are divided into strata and an independent sample is chosen from each stratum. The stratification strategy consists of stratification and sample allocation, which are important issues that are repeatedly considered in survey sampling. Although a stratified multistage sample design is often used in practice, the literature tends to discuss simple sampling in terms of stratum effects or stratum efficiency. This study examines an existing stratum efficiency measure for two-stage sampling and further proposes additional stratum efficiency measures using the design effect model. The proposed measures are used to evaluate the stratification strategy of the sample design for high school students of the 4^th Korean National Environmental Health Survey (KoNEHS).

• The Korean Journal of Applied Statistics
• /
• v.28 no.6
• /
• pp.1217-1225
• /
• 2015

Survey research, data is commonly collected through a sample design with complex design features that allow the relative efficiency on the precision of an estimator to be measured using the concept of the design effect compared to simple random sampling as a reference design. This concept is most useful when the design effect can be expressed as a function of various design features. We propose a design effect formula suitable under a stratified multistage sampling by generalizing Gabler et al. (1999, 2006)'s approaches for multistage sampling. Its use can either guide improvement in the design efficiency when in design stage or enable the evaluation of the adopted design features afterwards.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.632-633
• /
• 2000

Lincomycin의 추출을 위한 최적용매 및 최적 추출조건을 조사하였고 회분식 다단 추출을 시도하는 한편, 연속식 3단 향류추출장치를 개발하여 lincomycin의 추출효율을 조사하였다. 연속식 3단 향류추출장치를 운전한 결과 회분식 추출과 마찬가지로 단수가 증가함에 따라 lincomycin의 추출효율이 증가함이 확인되었고, 3단을 거친 수용액상에서는 lincomycin이 거의 발견되지 않음이 확인되었다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.377.1-377
• /
• 2001

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.70-72
• /
• 2003

대용량 데이터베이스로부터 순차 패턴을 발견하는 문제는 지식 발견 또는 데이터 마이닝(Data Mining) 분야에서 주요한 패턴 추출 문제이다. 순차 패턴은 추출 기법에 있어 연관 규칙의 Apriori 알고리즘과 비슷한 방식을 사용하며 그 과정에서 시퀀스는 해쉬 트리 구조를 통해 다루어 진다. 이러한 해쉬 트리 구조는 항목들의 정렬과 데이터 시퀀스의 지역성을 무시한 저장 구조로 단순 검색을 통한 다수의 복잡한 포인터 연산수행을 기반으로 한다. 본 논문에서는 이러한 해쉬 트리 구조의 단정을 보완한 다단게 선형 배치 트리(MLLT, Multi-level Linear Location Tree)를 제안하고, 다단계 선형 배치 트리를 이용한 효율적인 마이닝 메소드(MLLT-Join)를 소개한다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.91-99
• /
• 2007

It was intended in this study to investigate the effects of various parameters on the chemical reaction or mass transfer yield in a tubular-type nuclear waste treatment equipment. Since such equipments, as a tubular reactor, multistage solvent extractor, and adsorption column, accompany chemical reaction or mass transfer along the fluid-flowing direction, mathematical modeling for each equipment was carried out first. Then their behaviors of the chemical reaction or mass transfer were predicted through computer simulations. The inherent major parameters for each equipment were chosen and their sensitivities. affecting the reaction or mass transfer yield were analyzed. For the tubular reactor, the effects of axial diffusion coefficient and reaction rate constant on the reaction yield were investigated. As for the multistage solvent extractor, the backmixing of continuous phase and the distribution coefficient between fluid and solvent were considered as the major parameters affecting the extraction yield as well as concentration profiles throughout the axial direction of the extractor. For the adsorption column, the equilibrium constant between fluid and adsorbent surface, and the overall mass transfer coefficient between the two phases were taken as the major factors that affect the adsorption rate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1094-1100
• /
• 2014

TEvaporator is key component in food, seawater distillation and waste water treatment system, which is basically to concentrate the raw liquid by evaporating the pure water under vacuum condition. The liquid concentration is performed through the membrane, electro-dialysis and evaporation. In this study, only the evaporating type was treated for evaluating the economic analysis with the various operating conditions. The results of this study showed that the performance of the OT-MSF desalination system is increased with decreasing the temperature difference between the neighboring evaporators, which means that the number of evaporators is increased, under the determined design conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.197-205
• /
• 1992

In this paper object recognition using neural network is studied. The recognition is accomplished by matching linear line segments which are formed by local features extracted from the curvature points. Since there is similarities among segments. The boundary of models is not distinct in feature space. Due to these indistinctness the ambiguity of recognition occurs, and the recognition rate becomes degraded according to the limitation of boundary decision capability of neural network for similar of features. Object recognition and to improve recognition rate. Local features are used to represent the object effectively. The validity of the object recognition system is demonstrated by experiments for the occluded and varied objects.