• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.23-31
• /
• 2009

Since 9.11 terrorist attacks against the USA, the new paradigm for "supply chain security" has been established. And at the same time a lot of researches are being made on supply chain security by many foreign companies or research institutes. However, domestically the terms "supply chain security" themselves are not yet familiar, and the paradigm of security are not being used in the logistics, while little researches are being made on them But recently along with development of "ConTracer," a supply chain security technology, which is to be used as the equipment for container cargo transportation safety based on RF1D technology, related researches have begun to be activated. The key issues for the development of equipment for container transportation safety are to obtain both a high recognition rate and enough recognition distance. To this end, this study has tested the ConTracer (433 MHz type and 2.4 GHz type) by using Taguchi Method. According to our test results, in the case of 433 MHz type, it is a little more effective that the reader faces to the front-right side, and in the case of 2.4 GHz, reader direction does not make difference in the view of sensitivity. The test also has proved that it is better that antenna location, as expected, is to be installed on the outside for both types alike.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.277-280
• /
• 2008

Multi layer bellows are being manufactured for commercial vehicle because of the characteristic of high durability compared with single iaγor bellows used to passenger vehicle. Finite Element Method (FEM) study and optimization about single layer bellows are actively progressed, but FEM study about multi layer bellows which have gap between layer is rarely processed. Therefore, this article presents finite element modeling of multi layer bellows for the improvement of simulation reliability. For the shape optimization of multi layer bellows, design of experiment and Taguchi method are used.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.104-111
• /
• 2009

In this paper, the gear design program is presented. The profile of gears is created using classical mathematic formulations. In each gear, a kinematic joint is applied and one can define the 20 contact condition between gear pairs. Initial and boundary conditions such as force, torque, velocity, acceleration, etc. can be set. Thus, it is possible to analyze dynamic characteristics of gear pairs such as reaction moment and the variation of angular velocity. In order to find the optimal profile of gear pairs, two optimization methods based on design of experiments are inserted in the program; One is the Taguchi method and the other is the response surface analysis method. To verify the program, the rack & pinion gear is created and analyzed. Simulation results show that the developed program is useful and result data is reliable.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1992-1996
• /
• 2005

An automated mechanical parking system with a dedicated multi-floor building has been studied for improvements. Among the major components of the system, study is focused on the trolly which is the most important to the overall reliability of the system. The trolley holds and moves a parked vehicle horizontally into a specified position for the next sequence of operations. Optimization of a trolly structure is presented for strength and simplicity. With optimization, the weight has been reduced by 30% with respect to the conventional design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.2047-2054
• /
• 2003

In this paper, an approach of automatically finding and modifying the most appropriate orthogonal array (GO) is suggested and applied to a new structural optimization procedure with two steps. GO is motivated by the situation where finding a proper orthogonal array from the tables in the literature is difficult or impossible. Now the Taguchi method is made available for various numbers of variables and levels. In the two-step structural optimization, the Taguchi method equipped with GO and a shape optimization using the finite differencing method is consecutively applied. The existence or non-existence of an element can be taken as a factor level and this feature is utilized finding the best topology from a set of potential topologies suggested from the user's expertise. This greatly enhances applicability and one can expect a better result than the case in which each step is applied independently because these steps are complementary each other.

• Design & Manufacturing
• /
• v.1 no.1
• /
• pp.13-16
• /
• 2007

Almost all injection molds have multi-cavity runner system for mass production, which are designed with geometrically balanced runner system in order to accomplish filling balance between cavity to cavity during processing. However, even though geometrically balanced runner is used, filling imbalance have been observed. Filling imbalance could be decreased by modifying processing conditions such as injections rate, mold temperature, injection pressure, melt temperature that are related to shear, viscosity. In this study, a series of experiment was conducted to investigate filling imbalance variation when modifying runner layout and polymer and to determine which processing condition influences as the primary cause of filling imbalance in geometrically balanced runner system.

• The Korean Journal of Applied Statistics
• /
• v.5 no.1
• /
• pp.19-28
• /
• 1992

In this paper, minimal balanced $2^t$ fractional factorial designs which permit the estimation of main effects and 2-factor interactions are developed by using a partially balanced array. Such designs are characterized by a minimum number of runs and some balancedness property of the variance-covariance matrix of the estimates. In addition to describing the designs, optimality criteria are discussed and the trace-optimal designs are presented. The proposed designs are especially useful in Taguchi method, where we need to investigate up to 2-factor interactions of the control factors.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.104-110
• /
• 2002

In this study, the prediction on the quality of tools after coating process has been investigated. Under different coating conditions, cutting resistances have been obtained and analyzed with a tool dynamometer to provide optimized coating conditions. The optimized coating condition has been computed with the most effective factors found by S/N ratio of Taguchi method. To evaluate the influence of the factors on cutting efficiency through the minimum of number of experiment times, the way of neural network design using Taguchi method has been employed.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.37-45
• /
• 2004

Grinding is a finishing operation of products in various areas. Surface roughness of industrial components obtained in grinding operation is a critical quality measure but is a function of many operating parameters and their interactions. To achieve higher surface roughness and to identify the influence of grinding parameters on surface roughness, it is an ideal situation fer using the design of experiments. This paper presents an successful optimization of grinding conditions and prediction of surface roughness using the design of experiments. From the experimental verification tests, it was observed that this approach was useful as a robust design methodology for grinding operation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1232-1240
• /
• 2002

Recently, linear motors are applied to many small precision products. Thus high generating power with small size is required of it. In order to increase the motor efficiency, the design variables need to be optimized. In this study, Vector Fields FEM software, OPERA-3d, was used for simulating linear motor. The thrust and magnetic flux density at the air-gap center were simulated and compared with the experimental results. Taguchi method was applied to investigate the effects of each variables. As a result, the thickness of conductor and magnet was important for the thrust but the thickness of the yoke. The temperature of the conductor was determined by finding the thermal conductivity that was determined by experimentation. Correlation equation relating to the thrust and temperature was proposed by Latin square and Least Square method. The optimum design variables were determined by correlation equation, and compared with simulation results. According to this analysis, thrust force of linear motor was improved about 7% comparing with conventional model.