• Korean Management Science Review
• /
• v.7 no.2
• /
• pp.3-21
• /
• 1990

제품 및 공정의 설계와 개선을 위한 다구찌 방법은 제품의 품질향상을 위한 획기적 방법으로 최근 많은 관심의 대상이 되고 있다. 본 논문에서는 품질문제 해결을 위한 다구찌의 기본 전략을 종래의 전통적 개념과의 비교를 통해 소개하였으며, 구체적 방법으로서 직교배열에 의한 실험계획과 SN비를 바탕으로 한 파라미터 설계방법에 대해 다구찌의 견해와 다른 대안들을 함께 소개하고 앞으로의 연구방향에 대해 논의하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.49-49
• /
• 2003

• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.85-91
• /
• 1996

일본의 품질 전문가 다구찌가 제안한 파라미터 설계의 장단점에 대해 많은 논의가 있어왔다. 본 연구에서는 신호 대 잡음 비율에 초점을 두어, 이론적 쟁점이 무엇인지를 요약하고, 그 문제점을 모의실험을 통해 구체적으로 지적하였다. 한편 신호 대 잡음 비율에 대한 대안 중에서 Box의 변수변환 방법을 소개하였다.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.871-875
• /
• 2001

Laser photolithography technique is useful for fabricating micro-patterns of silicon wafers. In this work, the laser photolithography micromachining technique is optimized based on Taguchi method. Sensitivity analysis was performed using laser scanning speed and laser power level as the parameters. The results show that for the photoresist used in this work, a laser scan speed of $70{\mu}m/s$ at 50mW laser power gives the best result.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.17-24
• /
• 1997

Despite the increasing demands for improved product design, a limited number of works have been reported in the field of sheet metal forming. In the present study, introducing the Taguchi method, an otpimal and robust combination of parameters in found and a data base management system is utilized for knowledge acquisition. Analysis data, estimation rules of formability and graphical representation of the analysis have been employed for the dewigner's understanding and evaluation. The developed system is applied to a deep drawing process. Through the present study, it is shown that the developed systerm is useful for the design and the formability estimation of sheet metal forming processes.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.25-35
• /
• 1999

This paper presents a control gain tuning scheme for multi-axis PID control systems by Taguchi method. As an experimental set-up, a parallel mechanism machine tool has been selected. This machine has eight servodrives and each servodrive has four control gains, respectively. Therefore, total 32 control gains have to be tuned. Through a series of design of experiments, an optimal and robust set of PID control gains is tuned. The index of the sum of position error and velocity error is reduced to 61.4% after the experimental gain tuning regardless of the feedrate variation.

• Proceedings of the KWS Conference
• /
• 1998.05a
• /
• pp.223-226
• /
• 1998

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.740-746
• /
• 2008

In this paper, robust structural design of the PEMFC stack gasket is pursued with Taguchi method by considering the noise factor in stack assembly. The study of noise problem in stacking is required to secure the safety and performance improvement of PEMFC stack. The design parameters in the Taguchi method are selected so that the structural responses are insensitive to the noise factors. In the gasket analysis, a Mooney-Rivlin strain energy function is used to consider hyperelasticity between load and displacement. By uni-axial and equi-biaxial tension tests of the gasket, the material properties are determined for the use in robust design of PEMFC gasket. The robust design of the PEMFC stack may provide structural reliability.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.549-550
• /
• 2011

본 논문은 다구찌 설계방법을 이용하여 이동식 정수 시스템의 구조물에 대한 최적설계 조건을 확보하기 위하여 유한요소해석을 수행하였다. 다구찌 설계방법은 이동식 정수 시스템 구조물의 설계인자 중 가장 큰 영향을 미치는 파라미터를 고찰하고 최적화 하는데 유용한 결과를 제시 하였다. 다구찌 설계방법으로 수행된 민감도 해석 결과에 따르면 이동식 정수 시스템 구조물의 최적설계에 필요한 중요 인자로 세로방향 보강빔의 수량을 보여주고 있다. 결과적으로 안전하면서 효율적인 이동식 정수 시스템 구조물을 제작하기 위한 최적설계 시 가로방향 보강빔 수량과 바닥판의 두께보다는 세로방향 보강빔의 수량이 매우 중요한 설계인자라는 해석결과를 제시하였다.

• Journal of the Korean Institute of Gas
• /
• v.10 no.2 s.31
• /
• pp.40-46
• /
• 2006

In this paper, the optimized design of a rectangular O-ring groove has been analyzed for a maximum Cauchy stress and maximum strain using the Taguchi method. This method may efficiently optimize the design parameters for an O-ring groove of a LPG filling unit. The computed FEM results indicate that the optimized design parameters can only be drawn by nine experimental numbers of iterations when the Taguchi design technique has been employed with a finite element method. This means that the Taguchi design method is very useful for the optimization design of O-ring rectangular groove geometry. Based on the computed FEM results by the Taguchi design technique, the dimensions of a groove geometry are given as h=2.5 mm, d=2.74 mm, c=0.15 mm, and w=3.0 mm. In this study, the initial compression ratio of O-rings is recommended as 8.7% for a gas supply pressure of 18 $kg/cm^2$.