The formation properties and oxidation mechanism of electrochemically oxidized porous silicon(OPS) films have been studied. To examine the humidity-sensitive properties of OPS films, surface-type and bulk-type humidity sensors were fabricated. The oxidized thickness of porous silicon layer(PSL) increases with the charge supplied during electrochemical humidity sensor shows high sensitivity at high relative humidity in low temperature. The sensitivity and linearity can be improved by optimizing a porosity of PSL. (author). refs., figs.
전위차 측정형 바이오 센서는 기준전극에 대한 센서 전극의 전기화학적 전위를 정확하게 측정하여야 하므로 기준전극의 안정성이 매우 중요하다. 기준전극의 전위는 전해질 용액 내의 염소 음이온 농도에 영향을 받으나 다행히도 혈액 내의 염소 음이온 농도는 거의 변화가 없으므로 혈액 속에서의 은/염화은 기준전극의 전위도 거의 변화가 없다. 본 연구에서는, 사진석판 (Photolithography) 공정을 이용하여 실리콘 표면 및 다공질 실리콘 표면에 은/염화은 박막 기준전극을 제작하고 시료 용액에서의 drift, 안정성, 재현성 등에 대한 특성을 고찰하였고, SEM, AES, EDX 스펙트럼 등을 이용하여 전극의 표면을 분석하였다. 시료 용액의 염소 음이온 농도를 $10^{-4}$M에서 1M까지 변화시켜가며 기준 전극의 전위를 측정한 결과 약 50mV/pCl의 기울기를 얻었으며 이것은 Nernst식을 잘 따르는 결과이다.
A piezoresistive pressure sensor using a silicone rubber membrane has been fabricated on the selectively diffused (100)-oriented n/n+/n silicon substrates by a unique silicon micromachining technique using porous silicon ething. The width, length and thickness of the beam were 120${\mu}m$, 600${\mu}m$ and 7${\mu}m$, respectively and the thickness of the silicone rubber membrane was 40${\mu}m$. By the fusion of silicon beam and silicone rubber membrane, the mechanical strength of the pressure sensor could be highly improved due to smaller shear stress. The effectiveness of the sensor was confirmed through an experiment and FEM simulation in which the pressure sensor was characterized.
실리콘 고무 멤브레인(membrane)에 실리콘 빔(beam)들이 삽입된 형태의 저차압센서를 개발하였다. 제작된 저차압센서는 실리콘 고무(silicone rubber)를 멤브레인으로 사용함으로써 열악한 환경에서도 다양한 응용분야에 적용 가능하도록 하였다. 실리론 고무 멤브레인을 사용한 압저항형 저차압센서는 선택적으로 도핑(doping)된 (100) n/n+/n 웨이퍼 상에 다공질 마이크로머시넝(micro-machining) 기술을 이용하여 제작되었다. 제조된 센서의 감도(sensitivity)는 $0.66{\mu}V/mmHg$이고, 0.1% 이하의 비선형성(non-linearity)을 보였다.
다공질 실리콘(PS)기판 위에 rf-스퍼터링법으로 10~40 nm의 두께의 반 투과성 구리박막을 증착하였다. PS는 p형 (100) 실리콘 웨이퍼를 기판으로 50㎃/$\textrm{cm}^2$의 전류밀도를 사용하여 전해 에칭법으로 양극 산화하여 제작하였다. PS층과 Cu박막의 미세구조를 분석하기 위하여 SEM, AFM 그리고 XRD 분석을 시행하였다. AFM 분석결과 Cu 박막의 RMS roughness 값은 약 1.47nm로 Volmer-Weber 유형의 결정립 성장을 보였으며, 결정립의 성장은 (111) 배향성을 나타냈다. PS층의 PL 스펙트럼은 blue green 영역에서 관찰되었고, Cu 박막 증착 후 0.05eV의 blue shift가 나타났으며, 약간의 강도저하를 보였다. PS/Cu접합구조의 FTIR스펙트럼은 주 피크변화는 없으나 전반적인 강도의 감소를 보였다. I-V 특성곡선으로 본 PS/Cu 접합구조는 ideality factor가 2.77이고 barrier의 높이가 0.678eV인 Schottky 유형의 다이오드 특성을 보였다. PS/Cu 접합구조로 만든 다이오드 제조로 EL특성을 관찰할 수 있었다.
(100), n/$n^+$/n 3층 실리콘 웨이퍼를 이용하여 4가지 형태의 미소 빔 구조를 가지는 압저항형 유체센서를 제작하고, 그 특성을 조사하였다. Boron 확산을 통하여 압저항을 형성하였으며 형성된 압저항의 저항 값은 $1\;k{\Omega}$ 정도였다. 다공질 실리콘 마이크로머시닝을 이용하여 3차원의 실리콘 미소 빔 구조체를 제작하였으며, 실리콘과 금속의 열팽창계수 차이를 이용하여 빔을 위로 휘게 하여 원하는 형상으로 제조하였다. 제조된 센서의 출력 특성은 half-bridge를 구성하여 조사하였다. 같은 유속에서는 빔의 길이에 비례하여 출력 전압이 증가함을 보였고, 반면에 빔의 길이가 짧을수록 측정 가능 구간이 넓게 나타났다. 제조된 센서의 출력전압은 유량의 3.2승에 비례하여 증가하였으며, 이는 유속에 따른 빔이 받는 응력이 비 선형 특성을 나타내기 때문이다.
$SiH_{4}$를 반응물질로 사용하여 electron cyclotron resonance plasma enhanced chemical vapor deposition(ECR-PECVD)로 실리콘 기판위에 증착한 수소화 비정질 실리콘(a-Si:H)으로부터 가시 photoluminescence(PL) 가 관찰되었다. a-si:H/Si로 부터의 PL은 다공질실리콘으로부터의 PL과 유사하였다. 급속열처리에 의해 $500^{\circ}C$에서 2분간 산소분위기에서 어닐링된 시편의 수소함량은 1~2%로 줄어들었고 시편은 가시 PL을 보여주지 않았는데 이는 a-Si:H의 PL과정에서 수소가 중요한 역할을 한다는 것을 뜻한다. 증착된 a-Si:H의 두께가 증가함에 따라 PL의 세기는 감소하였다. $SiH_{4}$를 사용하여 ECR-PECVD에 의해 Si상에 증착된 a-Si:H로부터의 가시 PL은 Si과 증착된 a-Si:H막 사이에 증착이 이루어지는 동안에 형성된 수소화실리콘으로부터 나오는 것으로 추론된다.
This paper presents a capacitive humidity sensor using porous silicon layers formed tom the anodization of p-type silicon in HF solution. The upper electrodes consist of many aluminum strips over porous silicon, between which the porous silicon is etched away. The sensor showed a good sensitivity(20pF/%RH) and lineaity in the range of 40%RH$\sim$80%RH, a hysteresis of ${\pm}2%$ RH, and a slow transient response. These preliminary resluts show that futher improvement can still be expected.
The formation properties and oxidation mechanism of electrochemically oxidized porous silicon(OPS) films have been studied. To examine the humidity-sensitive properties of OPS films, surface-type and bulk-type humidity sensors were fabricated. The oxidized thickness of porous silicon layer(PSL) increases with the charge supplied during electrochemical oxidation and current density. The humidity sensor shows high sensitivity at high relative humidity in low temperature. The sensitivity and linearity can be improved by increasing a porosity of PSL.
In this work, porous silicon(PS) layer is used as a sensing material to detect organic gases. To do this, PS sensors with membrane structure are fabricated. The sensors were made by applying the technologies of membrane formation by anisotropic etching of silicon, and PS layer formation by anodization in HF solution. From fabricated sensors, current-voltage (I-V) curves were measured against ethanol (called alcohol), methanol and acetone gases evaporated from 0.1 to 0.5% solution concentrations at $36^{\circ}C$. As the result, all curves showed rectifying behavior due to a diode structure between Si and PS, and the conductance of sensor devices increased largely with the organic solution concentration at high voltage of 5V.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.