• 제목/요약/키워드: 다결정체

검색결과 21건 처리시간 0.023초

ErFe2O4 다결정체 시료의 자기적 특성 연구 (Magnetic Properties of Polycrystalline ErFe2O4)

  • 김재영;이보화
    • 한국자기학회지
    • /
    • 제18권6호
    • /
    • pp.217-220
    • /
    • 2008
  • Rare-earth iron oxide $ErFe_2O_4$의 다결정체 시료의 자기적 특성을 연구하였다. 단일상의 다결정체 $ErFe_2O_4$ 시료를 CO/$CO_2$ gas 분위기에서 고체상태반응법으로 합성하였다. X-ray diffraction 측정을 통해 $ErFe_2O_4$ 시료는 space group R3m Rhombohedral 구조를 가지며, 온도에 의존하는 magnetization 측정을 통해 250 K에서는 자기적 전이가, 220 K에서는 구조적 전이가 일어나는 2단계 상전이 현상을 확인하였다.

다결정체의 탄소성 대변형해석 (Analysis of elastic-plastic large deformation for polycrystalline solids)

  • 김영석;김정석
    • 대한기계학회논문집A
    • /
    • 제21권8호
    • /
    • pp.1291-1297
    • /
    • 1997
  • Elastic-plastic finite element(FE) simulation was performed for polycrystalline solids subjected to plane strain tensile loading. Using Asaro's double slip crystal plasticity model, the polycrystalline solids were modeled by assigning different initial slip directions to each grain. From the FE calculations, the microscopic deformation characteristics of polycrystalline solids were analyzed. Moreover, the effect of grain size and grain boundaries on the deformation characteristics were clarified.

CeO2와 각종 산화물에 의해 동시 안정화한 정방전 ZrO2 다결정체의 소결성과 안정성 (Sinterability and Stability of Tetragonal Zirconia Polycrystals Co-Stabilized by CeO2 and Other Oxides)

  • 박정현;문성환
    • 한국세라믹학회지
    • /
    • 제28권7호
    • /
    • pp.541-548
    • /
    • 1991
  • Sinterability and stability of TZP ceramics co-stabilized by 12 mol% CeO2 and divalent or trivalent oxides less than 1 mol% were investigated. Divalent and trivalent oxides increased stability of tetragonal ZrO2. 100% tetragonal ZrO2 phase was obtained by doping 12 mol% CeO2 and 0.2 mol% CaO and MgO respectively when sintering was carried out at 1500$^{\circ}C$ for 2 hours. Divalent and trivalent oxides improved sinterability and inhibit grain growth of ZrO2. And it was found that CaO was the most effective sintering aid and grain growth inhibitor for ZrO2 in this study. Incorporation of divalent and trivalent oxides into 12Ce-TZP increased the strength of 12Ce-TZP and particulary 12Ce, 0.4Ca-TZP exhibited a flexural strength of about twofold greater than 12Ce-TZP.

  • PDF

융액 일방향 응고법에 의한 ${\gamma}$-$6Bi_2O_3$.$GeO_2$ 투명 다결정체의 제조 (Preparation of Transparent ${\gamma}$-$6Bi_2O_3$.$GeO_2$ Polycrystals by Unidirection Solidification of Melt)

  • 김호건;김명섭;류일환
    • 한국세라믹학회지
    • /
    • 제27권4호
    • /
    • pp.567-573
    • /
    • 1990
  • Solidification condition for preparing transparent ${\gamma}$-6Bi2O3.GeO2 polycrystals by unidirectional solidification of melt, were investigaetd and the properties of the polycrystals prepared were measured. The ${\gamma}$-6Bi2O3.GeO2 polycrystals showing transparency like a single crystal were obtained by the unidirectional solidification of ${\gamma}$-6Bi2O3.GeO2 melt at a solidification rate of 0.5mm/h under a thermal gradient of 12$0^{\circ}C$/cm. The transparent polycrystals obtained showed the same photoconduction and optical activity as the ${\gamma}$-6Bi2O3.GeO2 single crystals grown by Czochralski method. But the electro-optic effect of polycrystals was heterogeneous because the colummar ${\gamma}$-6Bi2O3.GeO2 crystals were not oriented to the particular crystallographic direction.

  • PDF

CeO2 안정화 정방정 Zirconia 다결정체(Ce-TZP)에 관한 연구(II) : Ce-TZP의 고온 기계적 성질과 파괴거동의 변화 (A Study on the Ceria Stabilized Tetragonal Zirconia Polycrystals(Ce-TZP)(II) : Mechanical Properties of Ce-TZP and its Fracture Behavior at Elevated Temperature)

  • 강대석;김문일;박정현;문성환;백승수
    • 한국세라믹학회지
    • /
    • 제26권6호
    • /
    • pp.789-794
    • /
    • 1989
  • The high-temperature strength of Ce-TZP was measured at 200, 650 and 100$0^{\circ}C$ by 4-point bending test. And its fracture behavior was observed by SEM. Below $650^{\circ}C$ of the temperature, where monoclinic fraction was almost zero, the decreasing rate of bending strength was relatively slow, but above this temperature, high temperature strength was largely decreased as a result of the decrease of stress-induced transformation of zirconia. The observation of fracture surface bended at 100$0^{\circ}C$ indicated that the fracture mode changed from intergranular-into transgranular-form with regardless of ceria contents.

  • PDF

칼시아 안정화 정방정 지르코니아(Ca-TZP)의 소결 및 등온상전이 거동 (Sintering and Isothermal Phase Transformation of Calcia Stabilized Tetragonal Zirconia Polycrystals)

  • 곽효섭;백용혁;이종국
    • 한국결정성장학회지
    • /
    • 제3권1호
    • /
    • pp.37-44
    • /
    • 1993
  • 수열반응법으로 합성한 칼시아 안정화 지르코니아 분말을 $1200^{\circ}C~1400^{\circ}C$의 온도에서 소결시켜 Ca-TZP 세라믹스를 제조한 후 소결체의 물성과 $250^{\circ}C$에서의 등온 상전이 거동을 고찰하였다. 그 결과 소결밀도가 약 97%이고 평균 입자크기가 $0.1~0.25{\mu}m$인 미세한 구조의 정방정상 지르코니아 다결정체(Ca-TZP) 세라믹스를 제조할 수 있었다. 이러한 Ca-TZP 세라믹스는 종래의 Y-TZP 세라믹스에 비햐여 열안정성이 매우 우수하였다.

  • PDF

Y-TZP의 燒結性 및 相 安定性에 대한 CuO添加의 影響 (Influence of CuO Dopants on the Sintering Ability and Phase Stability of Yttria-Stabilized Tetragonal Zirconia Polycrystals)

  • 피재환;김윤해
    • 한국해양공학회지
    • /
    • 제13권2호통권32호
    • /
    • pp.35-40
    • /
    • 1999
  • Effects of CuO addition on the sintering ability and the phase stability of Y-TZP. (Yttria doped Tetragonal Zirconia Polycrystals) were studied. The CuO dopants were found to be quite effective in reducing the sintering temperature to obtain full density and refining the grain size. The maximum allowable concentration of the dopants was limited to 0.3%mol% for CuO to maintain fully tetragonal phase. With the addition of these dopants, the flexual strength decreased by 20% in comparison with the undoped specimen but the fracture toughness increased by 15%.

  • PDF

수열합성법에 의한 칼시아 안정화 정방정 지르코니아(Ca-TZP)분말의 제조 (Preparation of Calcia Stabilized Tetragonal Zirconia Powders by Hydrothermal Synthesis Techniques)

  • 곽효섭;백용혁;문기동;이종국
    • 한국결정성장학회지
    • /
    • 제2권2호
    • /
    • pp.33-39
    • /
    • 1992
  • 칼시아를 안정화제로 사용하여 수열 반응법으로 지르코니아 분말을 제조한 결과 상온에서 정방정상으로 존재하는 지르코니아 다결정체(Ca-TZP) 분말을 제조할 수 있었다. 제조된 분말은 구형으로 입경이 9~13nm로 매우 미세하였으며, 비표면적은 $112m^2/g$ 이상, 그리고 응집은 약한 응집(weak agglomeration)특성을 나타내었다.

  • PDF