• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.2
• /
• pp.224-230
• /
• 2008

This paper is concerned with the active vibration control of building structure by means of the active tuned mass damper and the modified positive position feedback controller. To this end, one-degree-of-freedom spring-mass-damper system equipped with ATMD is considered. The stability condition for the addressed system when applying the proposed PPF controller is derived by Routh-Hurwitz stability criterion. The stability condition shows that the modified PPF controller is absolutely stable if the controller gain is positive. so that the modified PPF controller can be used without difficulty. Theoretical study shows that the modified PPF controller can effectively suppress vibrations as the original PPF controller does in smart structure applications. To investigate the validity of the modified PPF controller, a simple experimental structure with an ATMD system driven by DC motor was built. The modified PPF control algorithm was implemented on Atmel 128 microcontroller. The experimental result shows that the modified PPF controller can also suppress vibrations for the real structure.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.4 s.44
• /
• pp.43-54
• /
• 2005

This paper presents cost-effectiveness evaluation of semi-active control system for cable-stayed bridge under earthquake excitations with various magnitudes and frequency contents. Semi-active control system, which is operated by using Bi-stale control method on the basis of linear quadratic Gaussian (LQG) optimal controller, is designed for the benchmark control problem proposed by Dyke et at. The cost-effectiveness of the proposed control system is defined by the ratio of life-cycle costs between a bridge structure with shock transmission units and a bridge structure with the semi-active control devices. The simulated results show that the damper cost has little influence on the cost-effectiveness of the semi-active control system while the cost-effectiveness is quite sensitive to the damage cost induced by the bridge failure. It is also found that the semi-active control system guarantees relatively high cost-effectiveness for the cable-stayed bridge subject to the ground motions in the regions of moderate seismicity with soft soil condition and strong seismicity with stiff soil condition.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.14-24
• /
• 1999

현, 판, 막의 진동을 이용하는 피아노, 실로폰, 드럼, 북 등의 악기류를 제외하고는 일반적으로 구조물의 진동은 억제 대상이며 최근에 와서는 이에 관련된 환경 소음 및 진동에 대한 규제가 더욱 강화되는 추세이다. 그러나 자원 및 에너지 소비의 절감을 통한 제품단가의 인하뿐만 아니라 폐기물의 감소등 환경오염의 예방차원에서도 제품의 경량화가 지속적으로 추진되고 있고, 또한 제품성능에 대한 소비자의 기대는 상대적으로 저렴한 가격에 동일하거나 더 높아짐으로써 진동제어 문제가 더욱 부각되고 있다.(중략)

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.468-472
• /
• 1995

능동배기소음제어용 능동형 머플러의 배발은 자동차의 고출력 요구, 연비 향상 그리고 배기 소음규제의 강화 등의 이유로 개발의 필요성이 높아지고 있다. 외국의 경우 N.C.T, TRRL, M.H.I에서는 증동형 머플러의 개발을 위해서는 배기 가스 나 심한 충격에서 성능을 지속할 수 있는 액츄에이터와 센서의 설계, 개발을 전제로 하고 있다. 따라서 이러한 기술의 개발은 여러 능동제어기술의 발단을 촉진할 수 있다는 점에서 필수적이다고 할 수 있겠다. 능동형 머플러와 기존의 수동형 머플러 의 조합을 통해 광데역의 배기 소음을 저감할 수 있는 머플러의 개발은 연급한 장점 뿐만 아니라 독자적인 배기계 설계 기술을 확보한다는 점에서 연구 개발이 필요하다 고 볼 수 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.131-136
• /
• 1993

본 연구에서는 무한덕트의 경우를 기준으로 하여 반무한덕트(semi-infinite duct)와 유한덕트에서의 소음제어결과를 비교함으로써 반사에 따른 영향을 실험적으로 고찰하였다. 제어는 광대역의 평면파 소음을 대상으로 하였고 적 응필터 기법을 적용하여 실시간으로 감소시키고자 하였다. 또한 원소음의 진 행방향과 반대방향의 음에 대한 마이크로폰의 감도(sensitivity) 역시 능동소 음제어 시스템의 성능을 결정하는 주요 요소로 볼 수 있으므로 두 개의 마 이크로폰으로써 지향성 마이크로폰을 구성.실험을 통하여 그 결과를 고찰하 였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.185-190
• /
• 2007

In recent days, vibration isolation system is mostly required in precise measurement and manufacturing system to reduce vibration due to external disturbances and internal actuators. Among all the vibration isolation systems, air spring is widely used because of its low resonant frequency and high damping ratio. In this study, we first analyze the passive air-spring system using leveling valve, and then design the active vibration isolation system. Because the non-linearity of pneumatic characteristics, we try to design the fuzzy controller which is better than PID controller at complex and non-linear system, and then compare them both in experiment and simulation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.11
• /
• pp.1105-1110
• /
• 2008

In this paper, a saturated LQR controller considering control input's saturation for stable linear time-invariant systems with single control input is studied. Based on Lyapunov stability, two linear matrix inequality sufficient existence conditions for this controller are presented. Through numerical simulations for 2DOF vibrating system, it is confirmed that the saturated LQR controller is stable in the presence of control input's saturation and it is also shown that this controller can be applied to vibrating system practically.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.8
• /
• pp.781-787
• /
• 2009

This research is concerned with the application of the active linear actuator to the active vibration control of structure. The active linear actuator will be mounted on the sub-frame so that it can cancel the excitation transferred from the engine. Accelerometer mounted on the sub-frame detects the vibration and its signal is fed into the DSP controller where the control algorithm is installed. The output of the DSP controller is connected to the driver which amplifies the DSP output. In general, the pulse width modulation power amplifier is used to drive the voice-coil type actuator. This study shows the dynamic characteristics of the active linear actuator and active vibration control experimental results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.639-644
• /
• 2009

This research is concerned with the application of the active linear actuator to the active vibration control of structure. The active linear actuator will be mounted on the sub-frame so that it can cancel the excitation transferred from the engine. Accelerometer mounted on the sub-frame detects the vibration and its signal is fed into the DSP controller where the control algorithm is installed. The output of the DSP controller is connected to the driver which amplifies the DSP output. In general, the pulse width modulation power amplifier is used to drive the voice-coil type actuator. This study shows the dynamic characteristics of the active linear actuator and active vibration control experimental results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.4
• /
• pp.325-332
• /
• 2011

This paper is concerned with the active control experiments on elevator vibrations by means of the active roller guide. To this end, a roller guide was designed using a voice-coil actuator and linear guide. A simple proportional control algorithm combined with the band-pass filter was implemented using the DSP. Based on the initial experiments, a new control system which can handle lateral and front-back vibrations of elevator was built and tested using the elevator test tower. The experimental results show that the elevator vibrations are reduced by the active control technique.