• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.7
• /
• pp.1156-1165
• /
• 1997

Complex modal testing is employed for the in-situ parameter identification of a four-axis active magnetic bearing system while the system is in operation. In the test, magnetic bearings are used as exciters as well as actuators for feedback control. The experimental results show that the directional frequency response function, which is properly defined in the complex domain, is a powerful tool for identification of bearing as well as modal parameters. It is also shown that the position and current stiffnesses can be accurately estimated using the relations between the measured forces, displacements, and currents.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.697-703
• /
• 2000

In design step of an active vibration control system, the stability analysis is required for obtaining a stable control region so that the system is protected from it violent natural vibration. This paper describes the procedure of stability simulation for the active magnetic bearing-main spindle of a machine tool. The characteristic equation of the overall system is derived by assembling the dynamic equation of a flexible shaft and the transfer functions of feedback components. And the stable region is obtained by calculating the eigenvalues of the characteristic equation. The simulated control stable region is good agreement by comparing the experiment. Therefore the stable control gain is selected in this paper.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.75-78
• /
• 2003

In this paper, an active magnetic bearing-based motor-generator(M-G) system is designed and controlled using a digital PID control concept. The plant dynamics consisting of actuator and rigid rotor dynamics are described. And some experiments are conducted with each global control and local control concept. From the whirl test, the M-G set can be controlled within about ${\pm}10{\mu}m$ gap variation at the rotational speed of 6000rpm.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.82-89
• /
• 2004

In this paper, an active magnetic bearing(AMB) system is designed and controlled using a digital Proportional-Integral-Derivative(PID) control concept. The plant dynamics consisting of actuator and rigid rotor dynamics are described. A digital PID controller with a global control and a local control concept is designed and implemented using digital signal processor. Some experiments are conducted with each global control and local control concept. These include start-up test, impulse test, whirl response, and generator load test. The experimental results and comparison between those of a global control and a local control indicate that the global control of concept has impressive static and dynamic control performance for the prototype considered. From the whirl test, the developed system set can be controlled within about $\pm10\mu\textrm{m}$ gap variation at the rotational speed of 6000rpm and generate the AC power of frequency of $60\textrm{Hz}$, voltage of 100V and current of 0.8$\textit{A}$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.381-387
• /
• 2002

In this work, the dynamic characteristics of an oil-lubricated, short SFD with a central feeding groove are derived based on a theoretical analysis considering the effect of a groove. The validity of the analysis is investigated experimentally using an Active Magnetic Bearing (AMB) system as an exciter. For the theoretical solution, the fluid film forces of a grooved SFD are analytically derived so that the dynamic coefficients of a SFD are expressed in terms of its design parameters. For the experimental validation of the analysis, a test rig using AMB as an exciter is proposed to identify the dynamic characteristics of a short SFD with a central groove. As an exciter, the AMB represents a mechatronic device to levitate and position the test journal without any mechanical contact, to generate relative motions of the journal inside the tested SFD and to measure the generated displacements during experiments with fairly high accuracy. Using this test rig, experiments are extensively conducted with different clearance, which is one of the most important design parameters, in order to investigate its effect on the dynamic characteristics and the performance of SFDs. Damping and inertia coefficients of the SFD that are experimentally identified are compared with the analytical results to demonstrate the effectiveness of the analysis. It is also shown that AMB is an ideal device for tests of SFDs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.449-454
• /
• 2000

A new fuzzy logic control design algorithm suitable for multi-objective control problems is proposed based on the orthogonal array which is widely used for design of experiments in statistics and industrial engineering. The essence of the algorithm is to introduce Nth-certainty factor defined from the F-value of the ANOVA(analysis of variance) table, in order to effectively exclude the less confident rules. The proposed algorithm with multi-objective decision table(MODT) is found to be capable of the detection of inconsistency and the rule classification, reduction and modification. It is also shown that the algorithm can be successfully applied to the fuzzy controller design of an active magnetic bearing system.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.10
• /
• pp.99-106
• /
• 2008

5kWh FESS(Flywheel Energy Storage System) using AMB(Active Magnetic Bearing) has been under development and 1st trial system has been finished and run the operating test. Unfortunately, the test result was not satisfactory because FESS could increase the rotational speed up to 9,000 rpm only although the target rotational speed is 18,000rpm. It's because 1st bending mode frequency of flywheel shaft was too low and imbalance response was too big. To achieve the target speed, 1st bending mode and imbalance response must be improved and the whole FESS needed to be designed again. This paper presents the newly designed FESS and what has been changed from the 1st trial FESS to improve 1st bending mode and imbalance response. The experimental results to see how much 1st bending mode frequency was improved are presented, too.