• Title/Summary/Keyword: 누적피로

Search Result 192, Processing Time 0.031 seconds

Shear Damage Behavior of Reinforced Concrete Beams under Fatigue Loads (반복하중을 받는 철근콘크리트보의 전단피로손상거동)

  • 오병환;한승환;이형준;김지상;신호상
    • Magazine of the Korea Concrete Institute
    • /
    • v.10 no.1
    • /
    • pp.143-151
    • /
    • 1998
  • 최근들어 반복하중에 의한 철근콘크리트 구조물의 손상이 자주 발견되고 있으며 교량 등의 구조물 등은 때때로 과적차량에 의한 초과하중을 받아 이러한 피로손상이 심화되고 있다. 본 연구에서는 이러한 반복 하중을 받는 철근 콘크리트보의 누적피로손상에 대한 실험적 연구룰 수행하여 피로하중에 의한 철근콘크리트보의 손상과정을 규명하였다. 실험 변수를 전단철근의 양과 반복되는 하중의 크기 및 반복횟수로 하여 실험부재를 제작하였으며, 하중제어에 의한 휨시험법에 의해 3Hz의 반복하중을 시편에 재하하였다. 사인장 균열하중과 사인장 균열 후 반복하중에서의 보의 손상누적거동 즉 처짐. 전단철근의 변형도, 에너지 손실 등의 변화를 실험적으로 평가하였으며, 이를 통하여 반복하중에 의한 누적손상에 의해 철근 콘크리트보의처짐 및 전단변형도가 초기하중상태에서는 급격히 증가하다가 이후 점진적으로 증가하는 것을 규명하였다. 본 연구의 결과는 사용하중상태에서 점진적으로 발생할 수 있는 피로손상의 누적과정을 기술하여 주고 있다.

Surface damage accumulation in alumina under the repeated Inclined contact forces (수직-수평 반복하중을 받는 알루미나 표면에서의 피로손상 누적)

  • 이권용;최성종
    • Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
    • /
    • 1999.06a
    • /
    • pp.61-66
    • /
    • 1999
  • 반복 응력 상태 아래서 알루미나 세라믹의 피로 표면손상 누적현상이 분석되었다. 연속 미끄럼 접촉 시에 발생하는 응력 상태를 재현하기 위해서 동시에 작용하는 수직-수평 반복 압축하중 기법이 사용되었다. 알루미나 구와 평판의 접촉면에서 알루미나 미세 결정의 피로 파손에 의한 마모 입자 형성 기구가 관찰되었고, 반복하중의 횟수와 수직-수평 하중비가 커질수록 마모량은 증가하였다. 반복 접촉하중에 의한 표면손상 누적이 접촉 수직 변위 측정으로 정량화 되었다. 두 접촉 구조물의 강성 (하중-변위 선도의 기울기) 변화가 두 재질의 탄성계수의 변화로 표현되었다.

  • PDF

VDT 작업장에서 작업시, 시간별 근피로도의 측정 및 정량화

  • 민기식;한정수;이남식;안재용
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 1997.05a
    • /
    • pp.133-138
    • /
    • 1997
  • 인간공학 및 생체공학을 근거한 종합적인 연구 모델 제시로, 산업체에 산재해있는 작업 중에 VDT Workstation과 관련된 근로자의 상지에 대한 직업성 누적적 질환의 연구로, 상지의 외상성 누적적 질환을 일으킬 수 있는 ergonomic stressor의 감지, 진단, 및 공학적 control를 이용 직업성 누적적 질환 예방을 궁극적 목적으로 하여, 근무 교대 및 일시적 보직 변경 등 근무 순환의 적절한 인사관리 및 누적적 피로를 극소화 할 수 있는 근무/휴식의 적절한 시간 안배를 제시하며, VDT 주변 환경과 근로자 사이의 적절한 운용에 대한 교육 program을 개발, 또한 휴식 시 stretch exercise (근육의 피로 이완을 목적) 방법 등을 제시하며, 누적적 질환의 조기 증상을 감지하여 업무의 적절한 순환을 통하여 직업성 질환으로서의 발전을 방지하고자 하는 것을 취지로 기초연구를 수행하고자 하였다. (중략)

  • PDF

A Cumulative Damage Theory of Concrete under Variable Amplitude Fatigue Loadings (변동진폭(變動振幅)의 피로하중(疲勞荷重)을 콘크리트의 누적손상이론(累積損傷理論))

  • Oh, Byung Hwan
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.6 no.4
    • /
    • pp.79-88
    • /
    • 1986
  • A nonlinear cumulative damage theory, which can model the effects of the magnitude and sequence of variable amplitude fatigue loadings, is proposed. The concrete beam specimens are prepared and tested in four-point flexural loading conditions. The variable-amplitude fatigue loadings in two and three stages are considered. The present experimental study indicates that the fatigue failure of concrete is greatly influenced by the magnitude and sequence of applied, variable-amplitude fatigue loadings. It is seen that the linear damage theory proposed by Palmgren and Miner is not directly applicable to the concrete under such loading cases. The sum of the cumulative damage is found to be greater than 1 when the magnitude of fatigue loading is gradually increased and less than 1 when the magnitude of fatigue loading is gradually decreased. The proposed nonlinear damage theory, which includes the effects of the magnitude and sequence of applied fatigue loadings, allows more realistic fatigue analysis of concrete structures.

  • PDF

하나로 일차냉각계통 배관의 피로해석

  • 류정수
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1998.05b
    • /
    • pp.864-869
    • /
    • 1998
  • 파단전 누수균열을 일으키는 가장 주요한 파손 형태는 피로파손으로 사료되어, 하나로 일차냉각계통 배관의 피로파손 가능성에 대한 정량적인 해석을 수행하였다. 하나로 일차냉각계통 배관은 발전로에 비해 저온, 저압이므로 ASME Class 3 로 분류되어 설계 완료되었지만 Class 3 절차에 의해서는 피로해석을 구체적으로 수행할 수 없어, 본 연구의 피로해석에 서는 Class 1 절차에 따라 피크응력강도의 범위를 보수적으로 계산하여 피로누적계수를 산정하였다. 일차냉각계통 배관 중에서 피로파괴 가능성이 가장 큰 것으로 예상되는 고응력 지점을 배관응력해석 결과로부터 선택하여 피로해석을 수행하였다. 선택된 분기관 연결부, 앵커 지점 및 butt 용접부의 피로누적계수들이 모두 1 보다 훨씬 작았으므로 열평창과 OBE 지진하중으로 인한 일차냉각계통 배관의 피로파손 가능성은 매우 희박한 것으로 나타났다. 따라서 냉각재 상실시 파단전 누수균열 개념을 적용하기 위한 일차냉각계통 배관의 피로파손에 대한 배관의 건전성은 충분히 입증된 것으로 판단된다.

  • PDF

The Effects of Microcurrent Stimulation on Erector Spinae Fatigue Index (미세전류 자극이 척주세움근의 피로지수에 미치는 영향)

  • Kang, Da-Haeng
    • Journal of Digital Convergence
    • /
    • v.11 no.11
    • /
    • pp.545-551
    • /
    • 2013
  • This study aimed to compare the effects of microcurrent stimulation and rest on the fatigue index by applying both to subjects who had accumulated fatigue after performing short-duration physical activity. The experiment was performed at S University from December 2012 to February 2013, on 22 healthy men in their 20s, who were right-handed, and without peripheral or musculoskeletal diseases. All subjects lifted a 10-kg box lift and lower 100 times in 15 minutes. Immediately after that, muscle fatigue index (Median Frequency: MF) and blood fatigue index (Creatine Kinase Lactate: CK, Lactate Dehydrogenase: LDH) were measured by using surface electromyography. The subjects were divided into two groups, and microcurrent stimulation and rest were mediated to the experimental and control groups, respectively, for 20 minutes. After intervention, muscle fatigue index and blood fatigue index were measured and the changes in the accumulated fatigue index were compared. Both groups manifested significantly decreased cumulative fatigue after applying the mediation compared to the pre-intervention level (p < .05), the only exception being the fatigue index of the left erector spinae in the rest group. Compared to the rest group, the microcurrent stimulation group showed a significant decrease in muscle fatigue index (p < .05) but no significant differences were found in the blood fatigue index. Given the results of this study, microcurrent stimulation is considered to be helpful in muscle fatigue recovery for workers who have to perform repetitive movements lifting weights, and additional studies on the correlations of the fatigue recovery with respect to the long-term follow-up of fatigue index and mediation time are necessary.

터빈디스크합금 Waspaloy의 점소성변형거동 해석

  • 박노광;염종택;김인수
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2000.04a
    • /
    • pp.35-35
    • /
    • 2000
  • 터빈의 핵심구동부품은 손상이 누적되어 파괴에 이를 경우 치명적인 결과를 야기할 수 있기 때문에, 부품사용조건에서의 소성변형과 이에 따른 손상 누적을 정확히 예측하고 평가함으로써 균열생성 시점을 정확히 파악하여야 할 필요가 있다. 현재 터빈디스크와 같이 고온 고응력에서 사용되고 있는 소재부품의 수명은 궁극적으로 크리프변형과 피로시험의 공동작용으로 결정되며, 재료특성모델링 시험에 있어서도 dwell time 피로시험을 통해 dwell time 효과를 점검하고 점소성 재료변형에 근거하여 피로에 의한 변형 현상을 설명할 수 있다.

  • PDF

Comparison of Cumulative Damage Models by predicting Fatigue lives of Aircraft Flaperon Joint (손상누적모델의 비교를 통한 플래퍼론 연결부의 피로수명 예측)

  • Park, Tae-Young;Park, Jung-Sun
    • Journal of Aerospace System Engineering
    • /
    • v.3 no.4
    • /
    • pp.27-34
    • /
    • 2009
  • This paper deals with the lifetime prediction of Aircraft Flaperon Joint made of AISI 4130 steel. Reviews are performed on the published damage models at first. And three different damage models are used for predicting the fatigue life of the structure subjected to variable amplitude fatigue loading. These models require no increase in complexity of use, nor do they require additional material property or mission loading information to achieve the improved accuracy. Finally a comparison among the fatigue results is performed. It is observed that the Miner's rule could predict longer life than other cumulative damage models which take into account loads below the endurance limit.

  • PDF