• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.12
• /
• pp.963-969
• /
• 2021

The wind data measured from local meteorological masts is used to evaluate wind speed distribution and energy production in the specified site for wind farm However, wind data measured from meteorological masts often contain missing information or insufficient desired height or data length, making it difficult to perform wind turbine control and performance simulation. Therefore, long-term continuous wind data is very important to assess the annual energy production and the capacity factor for wind turbines or wind farms. In addition, if seasonal influences are distinct, such as on the Korean Peninsula, wind data with seasonal characteristics should be considered. This study presents methodologies for generating synthetic wind that take into account fluctuations in both wind speed and direction using the hidden Markov model, which is a statistical method. The wind data for statistical processing are measured at Maldo island in the Kokunnsan-gundo, Jeonbuk Province using the Automatic Weather System (AWS) of the Korea Meteorological Administration. The synthetic wind generated using the hidden Markov model will be validated by comparing statistical variables, wind energy density, seasonal mean speed, and prevailing wind direction with measurement data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1244-1251
• /
• 2022

Marine accidents due to a loss of stability, have been gradually increasing over the last decade. Measures must be taken on the roll reduction of a ship. Amongst the measures, building an anti-roll tank in a ship is recognized as the most simple and effective way to reduce the roll motion. Therefore, this study aims to develop a computational model for a U-tube type anti-roll tank and to validate it by experiment. In particular, to validate the developed computational model, the height of the free surface in the tank was measured in the experiment. To develop a computational model, the mesh dependency test was carried out. Further, the effects of a turbulence model, time step size, and the number of iterations on the numerical solution were analyzed. In summary, a U-tube type anti-roll tank simulation had to be performed accurately with conditions of a realizable k-𝜖 turbulence model, 10^-2s time step size, and 15 iterations. In validation, the two cases of measured data from the experiment were compared with the numerical results. In the present study, STAR-CCM+ (ver. 17.02), a RANS-based commercial solver was used.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.142-152
• /
• 2005

There are two definite objects for developing the startup transient of liquid rocket engine. One is to achieve the repeatability of startup to ensure higher reliability, and the other is to reduce the time of the startup transient. Typically in the initial phase of engine development as we are currently opposing, it is hard to estimate engine startup time due to the lack of experiences. In this work, a startup transient analysis tool was developed with the introduction of the mathematical model for each component of pump-fed liquid rocket engine system. Startup transient was investigated for a 25 ton class gas generator cycle engine to find necessary time for reaching steady state from startup and this enabled to reveal dynamic characteristics of the engine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5148-5154
• /
• 2012

The purpose of this study was to analyze the kinematic characteristics of the thrower's center of mass (COM) and the shot that her performance hits record high for the 29th National Athletic Competition. Two S-VHS video cameras were used to visualize. The Direct Linear Transformation technique was employed to paint a clear picture in the three dimensional coordination. Kwon3D was used to analyze the data. The results showed that release velocity and height were 13.73 m/s and 198.6 cm(119% by height ratio), respectively, which is considered as peak performance comparing an extensive review of previous literature on the shot put. Release angle was $34^{\circ}$, which is lower than the previous studies. The path of thrower's center of mass is needed to travel in a release direction during the flight phase. The vertical movement of the thrower's center of mass during the driving should be controlled. At release, the perfact timing is required without vertical and horizontal movements of the thrower's center of mass.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.1
• /
• pp.33-45
• /
• 1997

Axisymmetric shear layers around a free jet is forced by co-flowing and counter-flowing secondary jets from/to an annular tube around the jet nozzle. The jet potential core extends far downstream with co-flowing secondary jets due to inhibited vortex developing and pairing. For counter-flowing cases, the axisymmetric shear layer around the jet transits from convective instability to absolute instability for velocity ratios R＝1.3～l.65 for the uniform velocity jets. Consequently, the jet potential core length increases and the turbulence level in the jet core is reduced significantly. The jets are controlled better with extension collars attached to the outer nozzle exit because the annular secondary flow is guided well by the extension collars. For the vectoring of jet, the annular tube around the jet is divided in two parts and the only one part is used for suction. The half suction makes the different shear layer around the jet and vectoring the jet by Coanda effect. The vectoring and turbulent components are varied significantly by the suction ratio. The experiments are carried out to investigate the characteristics of forced free jets using flow visualization, velocity and turbulence measurements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.119.1-119.1
• /
• 2016

크라이오 워터펌프(CWP)는 크라이오 펌프(CP)와 달리 10 K 활성탄 어레이는 장착하지 않고 100 K 정도로 냉각시킨 배플만을 사용하여 물의 배기속도를 최적화 하는 데 초점을 맞춘 진공펌프다. 용기 압력이 10-9 mbar 대가 될 때까지는 잔류기체의 90% 이상이 수분이므로 다른 기체들의 배기 보다는 물을 잘 배기하는 것이 배기시간을 단축하고 도달 진공도를 낮추는 첩경이라는 아이디어에 근거를 두고 있다. CWP는 물 흡착확률을 거의 1에 가깝게 만들어서 오리피스 컨덕턴스에 육박하는 이상적인 펌프를 제작할 수 있지만 용도상 직부형(close type), 통과형(in-line type) 및 내장형(in-vessel type) 등 세 가지 다른 형태에 따라 성능도 약간씩 다르다. CWP는 모든 기체에 반응하는 정통적인 CP에 비해 훨씬 간단하고 저렴하게 만들 수 있으면서도 진공 시스템에 큰 영향을 미칠 수 있지만 물 이외의 기체들을 배기할 펌프가 필요하다는 측면에서 활용에 제약이 있다. 만일 TMP를 이미 사용하고 있거나 작은 TMP를 추가로 달아서 충분히 작동이 가능한 시스템이면서 수분 발생이 많은 곳이나, 또 활성탄의 오염이나 산소 분위기 등 CP 투입이 꺼려지는 환경이라면 CWP 사용이 좋은 선택이 될 수 있다. CWP의 물 배기용량은 CP의 알곤이나 질소 배기용량에 준하는 크기로 0.5g/cm2 이상임이 실험적으로 입증되었다. 따라서 일반적인 상황에서 정상 작동시 대부분의 기체는 TMP로 배출하고 잔류 수분만 포집하므로 CP처럼 주기적인 재생이 필요 없다. 필요하다면 CWP는 금속 표면에 응축된 물을 드라이펌프 작동만으로 쉽게 제거할 수 있고 혹시 오염 물질이 붙어도 세척이 용이하다. 이런 사용상 융통성과 여러 가지 장점에도 불구하고 그동안 물배기에 대한 인식이 미흡하고, 또 부수적이고 추가적인 비용이 드는 것으로 생각되어 주목을 받지 못했지만 디스플레이와 반도체 산업을 필두로 물 분압을 낮추고 생산수율을 높이는 것에 점점 더 관심이 높아지면서 CWP에 대한 수요도 높아지고 있다. 본 보고에서는 20인치 통과형 CWP를 만들고 14인치 TMP에 얹어 복합 진공배기시스템을 구성한 후 물 배기속도와 알곤, 질소 및 수소 배기속도를 측정하고 예측치와 비교했다. 아울러 물 배기용량 측정 및 CWP의 온도제어와 펌프재생 특성 평가 결과도 정리했다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.246-254
• /
• 2016

Thick-shell welding for super-sized oil storage tanks is currently done manually, which causes deterioration in quality and a lack of uniformity due to frequent rewelding. The limitations of the external environment must also be considered for manual welding. This paper describes the development of a carriage system for automatic vertical welding to increase reliability, reduce cost, and enhance productivity. The system consists of a welding platform, carriage device, and control unit, which were conceptually designed according to design specifications and manufactured with modular parts. In addition, the structure was analyzed for safety and to predict design problems in advance, and the results are reflected in reviewing the design. To evaluate the performance of the system, a tensile test, bending test, and weld time test were carried out, and the results were satisfactory. The time required for automatic weld was greatly improved by more than 87%, compared to the manual welding time.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.145-147
• /
• 2010

This study is the visually emotional identification lighting for easy to distinguish using 3colors LED on AtoN facility in shore and harbor, which have realized a controller for certainly express the mouth of a harbor by red light and green light of both sides a harbor and for synchronization at a time of right and left or serial sequential the harbor guidance light through synchronizer or timer by GPS. There is expectation effect that is prevent a confusion about distinguish of facility by ship's operator and to beautify a night scene of harbor, which is expressed to emotional identification lighting differ from great many lighting of harbor with variable color lighting the lighthouse body and vertical layer color lighting using LED. The function of AtoN is adapted that guidance light through synchronization or serial sequential lighting and display of harbor safety message by CW lighting, and this system is the power consumption greatly reduce by candle alternated high light LED.

• Journal of The Korean Association of Information Education
• /
• v.18 no.4
• /
• pp.615-624
• /
• 2014

According to the rapid growth and popularization of the SMART device, the society is being changed greatly and importance of SW education is being emphasized. Also many student have a lot of interests about mobile application programming. The latest study suggests using the robots in the programming education may help to induce learners' interest and motivation, participation, achievement. So in this research, I designed a programming educational plan for SW education using robot and mobile application development tool(App Inventor) and applied them. And I conducted a survey four ares such as class, robot, App Inventor, robot and App Inventor. As a result, learner's response of interest and satisfaction was very positive commonly at four areas. In particular, learners could get programming result immediately using smart phone and could control the robot using smart phone, so learner's interest had increased especially. The conclusion is that suggested plan for SW education using robot and mobile application development tool is useful for programming education.

• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.131-139
• /
• 2000

We designed high dose rate Ir-192 source which was prepared for substitute the Co-60 source in Ralstron unit (Simatsu, Japan) which is supplied for cervical cancer treatment. The source dimension is 1.5 mm in a diameter and 1.5mm thickness of cylinder and encapsulated with 3 mm diameter of stainless steel(SUS316L) to substituted for the Co-60 source size. The Ir-192 source was prepared the dose model for tissue dose computation through the experimental determination of apparent activity and applied the empirical tissue correction factors extended to 20cm distance. The tissue dose model was applied the 4.69 R/cm-mCi-hr gamma constant and the ratio of energy absorption coefficient of water to that of air showed 1.112 include filteration of the self-absorptions. In this experiments, we prepared the dose computation software to clinical usefulness.