• 제목/요약/키워드: 농축팩터

검색결과 5건 처리시간 0.026초

저압 가상임팩터의 성능평가 (Performance Evaluation of a Low Pressure Vitual Impactor)

  • 임경수;김현수;이규원
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2002년도 추계학술대회 논문집
    • /
    • pp.320-321
    • /
    • 2002
  • 가상임펙터(virtual impactor)는 충돌판을 가지고 있는 관성임팩터(inertial impactor)와는 다르게 분리입경보다 큰 입자를 분리할 수 있는 부 유동과 분리입경보다 작은 입자를 분리할 수 있는 주 유동으로 나누어져서 입자의 튀김(bouncing)이나 재비산(reentrainment) 없이 입자를 분리 또는 농축할 수 있다. 하지만 관성임팩터처럼 여러 단을 연결하여 작은 입자를 분리할 수 없기 때문에 주로 큰 입자의 분리 및 농축에 쓰여왔다. (중략)

  • PDF

단일 노즐 및 멀티-노즐 가상 임팩터의 성능평가 (Performance Evaluation on Single Nozzle and Multi-Nozzle Virtual Impactors)

  • 김대성;김민철;이규원
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2000년도 추계학술대회 논문집
    • /
    • pp.59-60
    • /
    • 2000
  • 에어로졸을 분리할 수 있는 장비로는 전기적 이동차 분석기(differential mobility analyzer), 싸이클론(cyclone), 습식 충돌기(impinger), 습식 싸이클론(wet cyclone), 확산 배터리(diffusion battery), 관성 임팩터(inertial impactor), 그리고 가상 임팩터(virtual impactor) 등이 있다. 이중 가상 임팩터는 설계 및 제작이 비교적 간편하고, 입자를 분리 및 농축하는데도 좋은 성능을 나타냄으로 널리 사용되어져 왔다. (중략)

  • PDF

원형 임팩터의 성능에 관한 수치적 연구 (Numerical Study on the Performance of the Round Type Impactor)

  • 허재영;김상수
    • 대한기계학회논문집
    • /
    • 제15권1호
    • /
    • pp.292-298
    • /
    • 1991
  • 본 연구에서는 입자질량고적재(high particle mass loading)의 경우가 전혀 고려되지 않았으며, 이것은 물론 임팩터가 사용되는 대부분의 경우, 즉, 대기중입자를 포집하는 경우에 입자의 적재량이 미소하기 때문이다. 그러나 임팩터 혹은 이와 유 사한 기능을 하는 장치의 응용은 매우 광범위하여 이중에는, OWG(optical wave guide) 제작이나 페인트 스프레이(paint spray) 또 입자공급장치에서 큰 입자를 걸러 낼 때와 같이, 입자의 적재량이 큰 경우도 적지 않다. 이러한 입자질량 고적재인 경우에는 입자운동이 기체유동장을 변화시키며 이에 따라 입자운동 자체도 변화되어진다. 본 연구에서는 이러한 관계를 분석하여 입자질량의 적재량정도가 입자의 포집효율에 미치 는 영향을 밝혀내었다.

고염도 폐수 농축을 위한 평판형 정삼투막 모듈의 성능 분석 (Performance Analysis of Plate-and-Frame Forward Osmosis Membrane Module for Concentrating High Salinity Wastewater)

  • 김유창;이승윤;박상진;김한석
    • 한국유체기계학회 논문집
    • /
    • 제19권6호
    • /
    • pp.68-74
    • /
    • 2016
  • Hydraulic fracturing of wells during oil and gas (O&G) exploration consumes large volumes of fresh water and generates larger volumes of contaminated wastewater with high salinity. It is critical to treat and reuse the O&G wastewater in a cost-effective and environmentally sound manner for sustainable industrial development and for meeting stringent regulations. Recently, forward osmosis (FO) has been examined if it is a promising solution for treatment and desalination of complex industrial streams and especially fracturing flowback and produced waters. In the present study, the performances of a plate-and-frame FO membrane element and a module (6 elements combined in series) were investigated for concentrating high TDS wastewater. An FO module has achieved up to 64 % water recovery (i.e., concentration factor of 2.76) from 10,000 ppm wastewaters and can concentrate feed streams salinities to greater than 30,500 ppm.