• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.452-456
• /
• 2006

본 연구는 수정 라리니에식 어도를 조립식으로 개발하여 실제 현장에 적용하기에 앞서 수리모형을 통해 어도 경사와 어도내 조류제 형태(평면형, 경사형, 역경사형)를 3가지로 달리하여 각 형태별 유속을 조사하고 실제 우리 나라 토착 민물고기인 갈겨니, 쉬리, 피라미, 금강모치의 소상능력을 시험하였다. 또한 실제 크기의 목재로 만든 조립식 수정 라리니에식 어도를 제작하여 충청남도 공주시 유구천의 농업용 보에 적용하였으며, 2005년 6월부터 10월까지 모니터링을 하여 수정 라리니에식 어도의 국내 하천 적용성에 대해서 검토하였다. 모형실험결과 수심은 6cm(현장 30cm)일때, 조류재의 형태는 평면형과 경사형, 경사는 1/20, 유속은 0.3-0.4m/s에서 어류가 원활하게 소상하는 것으로 나타났고, 어도내 마련된 휴식부에서는 실제 물고기들의 휴식하는 모습이 관찰되었다. 또한 휴식부의 잠공은 하천 유량 조건이 좋을 때보다 갈수기나 홍수기에 어류가 소상하는 통로의 역할뿐만아니라 저서 생물의 이동통로 역할을 할 수 있을 것으로 생각된다. 따라서 본 어도는 조류재의 형태에 따른 다양한 유속대를 제공하여 다양한 어종이 이용할 수 있을 것으로 판단되며, 조립식으로 되어 시공 및 유지관리가 용이하여 우리나라 하천 상황에 적절한 어도로 판단된다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.2
• /
• pp.44-54
• /
• 1988

This study was carried out to investigate the applicability of the conventional design method for ground supported circular cylindrical shell structures. For this purpose, the ensiled farm silo was adopted as a model structures. Herein, the conventional design method was based on the assumption that such structures are clamped at the bottom edges or the ground pressure is independent of the deflection at the surface. In the present paper, the applicability of above assumption was checked out by comparison with an exact method considering soil-structure interaction. Some results of numerical calculation show us ; When the ground is very hard, for example Winkler's constant k is larger than 100 kg / cm$^2$ / cm, or the bottom plate of structures has a infinitely stiffness, for example the bottom plate thickness is larger than 100 cm, the sectional forces, obtained from the conventional method at any wall of structures resting on an elastic foundation, can used for design purpose. Therefore, if the above condition is satisfied then the conventional assumptions can be justified for the design purpose. In this case, the assumption that such structures are fixed at the lower edges was more realistic than the assumption that the reaction pressure acting on structures is uniformly disributed since the accuracy of results of the analysis by the former assumption was higher than that obtained from the latter assumption. But the sectional forces in the bottom plate resting on ground directly could not be evaluate correctly by the conventional method.

• The Korean Journal of Pesticide Science
• /
• v.9 no.2
• /
• pp.132-139
• /
• 2005

New ${\beta}$-methoxyacrylate derivatives 1-4 having thio-enol side chain were prepared and subjected to in vivo screening for fungicidal activity against phytopathogenic fungi and many of them showed good fungicidal activities against especially rice blast and wheat leaf rust at 100 ppm.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.29 no.2
• /
• pp.39-52
• /
• 1987

This study was to investigate the effects of soil-structure relative stiffness on the structural characteristics of the cylindrical tank supported by soil. A standard example model of the farm silo rested on the Winkler's subsoil model was used for the analysis of soil-structure coupled system. In this paper, Winkler's constants 4,15 and l00kg/cm$^2$/cm were considered and the bottom plate thicknesses of the farm silo 20, 30, 50,100 and 150cm were adopted. For the given model the effects of bottom plate thickness were the most conspicuous at weakest Winkler's constant 4kg/ cm$^2$/cm. While when Winkler's constant is l00kg/cm$^2$/cm, the effect of the bottom plate thickness is almost negligible. On the other hand, when the bottom plate thickness is more than 100cm, the effects of elastic foundation were aknost disappeared. In design practice, it is hoped that the thicknesses of bottom plate should be determined reasonably because of it's considerable effect on the structural characteristics as the lOOcm thickness of bottom plate will not be practical value in usual sites.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.217-217
• /
• 2020

인간 물이용 중심의 하천 관리로 하천에 인위적으로 설치되는 횡단구조물은 물의 흐름을 막아 수질환경을 악화시킬 뿐 아니라 하천의 연속성을 단절하여 생물의 이동을 차단하여 생태계에 악영향을 미친다. 이러한 인위적인 구조물로서 약 34000여개의 농업용 보와 약 16000여개로 추정되는 낙차공이 다수 존재하고 있다. 이러한 구조물은 유수에 의하여 하상으로 전달되는 유수에너지를 저감하기 위하여 다양한 형태의 하상보호공을 설치하여 하천횡단구조물을 보호하도록 되어있다. 그러나 하상보호공에 사용되는 기술 중 사석 및 돌망태와 같은 기술은 시공비용이 적고 빠른 시간에 시공 할 수 있지만 급격한 홍수에 쉽게 파괴 및 유실이 되는 단점이 있으며, 콘크리트 소재 공법은 세굴방지에 좋은 효과를 발휘하는 장점을 지니지만, 시간이 지남에 따라 마모/변형되거나 포락/유실되어 하상을 지속적으로 보호하지 못하게 되며 과도한 세굴은 구조물의 안전성에도 영향을 미친다고 할 수 있다. 최근 기후변화로 인하여 돌발호우 및 강우량의 증가로 돌변하는 하천환경에 대한 적용기술은 미비한 실정이기 때문에, 많은 연구자들은 이에 대한 해결책을 찾기 위하여 자연친화적 생태복원 기술을 개발하고 있다. 본 연구에서는 바이오폴리머를 다층다공성 하상보호기술에 대하여 에너지 저감 효율, 고유속에서 한계 소류력, 소재 이탈 실험을 최대유량 10 ㎥/s, 유속 8m/s를 재현할 수 있는 실규모 하천실험장에서 진행하여 과학적인 안전성을 확인하였다.

• Journal of agriculture & life science
• /
• v.51 no.2
• /
• pp.165-173
• /
• 2017

To evaluate performance of the experimental pick-up type pulse crop harvester for harvesting sprout bean, its pick-up and discharging grain loss ratios, grain quality such as whole grain ratio, damaged grain ratio, unthreshed grain, and foreign material ratio in grain tank, germination rate of threshed grain, and theoretical field capacity of the harvester were analyzed according to engine speeds of 2000, 2400 and 2800 rpm and harvesting speeds of 0.6, 1.0 and 1.4 m/s. It is considered that the harvester showed optimum performance at the engine speed of 2800 rpm and the harvesting speed of 1.0 m/s, and then average pick-up grain loss ratio of 2.7%, discharging grain loss ratio of 0.5%, whole grain ratio of 99.3%, damaged grain ratio of 0.2%, unthreshed grain ratio of 0.0%, foreign material ratio of 0.2%, and germination rate at 8 days after seeding of 72.8% were shown. It is considered that the harvester has lower grain loss and higher grain quality than the imported bean combines. And also as it could harvest 3 rows of cut and dried sprout bean crop width of which was about 2 m, its effective field capacity was estimated for about 50 a/h.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.173-173
• /
• 2017

드론의 시장규모가 커짐에 따라 초창기 군사 목적에서 현재 민간부문으로 확대되고 있다. 현재 드론은 실외에서 사용될 목적으로 제작된 것이 많으나 실내에서도 드론의 활용 여부가 증가할 것으로 예상된다. 본 연구에서는 실외에서만 사용 가능한 GPS를 대신하여 영상 촬영으로 획득한 이미지를 CNN으로 학습을 시켜 자율고도제어비행을 하도록 한다. 첫 번째로 수동 조작하는 드론에 IMU센서를 부착하여 획득한 고도 데이터를 표로 제시함으로써 GPS를 사용하지 않는 드론의 실내주행에서 일정한 고도 유지는 다소 무리가 있음을 보여준다. 두 번째로 드론의 수동 조작은 일정하지 않은 고도 때문에 CNN의 학습할 영상 획득이 어렵다. 일정한 고도의 영상 획득을 위한 실험용 높이 조절 Base를 제작하여 고도별 영상을 획득한다. 획득한 영상을 통해 얻은 이미지를 CNN 학습을 시킨 후, 학습에 사용되지 않은 이미지를 사용하여 고도 판별을 확인한다. 대조군으로 실내장소를 바꾸어 미리 학습된 CNN으로 고도 판별을 확인한다. 학습에 사용된 이미지의 환경(생명공학관)과 대조군(제 2 공학관)이 촬영된 장소의 환경요소의 차이로 오차가 발생한다. 오차는 실내 장소의 총 높이의 차이 및 서로 상이한 천장 구조물에 따른 것으로 사료되며 Data crop을 통해 획득한 이미지의 천정 부분을 제거하여 노이즈를 줄여 고도 판별의 정확도를 높일 수 있을 것으로 예상한다. 세 번째, CNN으로 학습을 통해 Model을 도출하여 자율 고도 제어 프로세스를 제시한다. 그리고 해당 프로세스를 이용한 자율고도제어 주행과 수동조작을 통한 주행에서의 Z축 가속도 데이터의 표준편차를 비교하여 본 연구의 실효성을 보여준다

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.657-663
• /
• 2018

In this study, shape optimization was performed to improve the vibration isolation capability of an anti-vibration rubber assembly, which is used in the field option cabin of agricultural tractors. A uniaxial tension test and biaxial tension test were performed to characterize the hyper-elastic material properties of rubber, and the data were used to calibrate the material model used in the finite element analyses. A field test was performed to quantify the input excitation from the tractor and the output response at the cabin frame. To account for the nonlinear behavior of rubber, static analyses were performed and the load-displacement curve of rubber was derived. The stiffness of the rubber was calculated from this curve and input to the harmonic analyses of the cabin. The results were verified using the test data. Taguchi's parameter design method was used to find the optimal shape of the anti-vibration rubber assembly, which indicated a shape with reduced stiffness. The vibration of the cabin frame was reduced by the optimization by as much as 35% compared to the initial design.

• Korean Journal of Agricultural Science
• /
• v.33 no.1
• /
• pp.67-72
• /
• 2006

This study was carried out to compare a yield performance about CNU maize hybrids developed at the Maize Genetics and Breeding Lab. in Chungnam National University. Among the hybrids incorporated in the test, CNU 3 and 1 showed higher dry matter per 10a and lower kernel yield per 10a than check hybrid, Kwanganok. Hongchon 5 and Suwon169 showed higher kernel yield than Kwanganok. The average yield of CNU 3 hybrid in dry matter and CNU 4 in kernel yield were 2,106kg/10a and 854kg/10a in regional adaptability test, which were increased 33% and 8% compared with a check hybrid, respectively. Also, these hybrids had better stay green characteristics than check hybrid and showed moderately resistance to corn borer and leaf spot.

• Journal of agricultural medicine and community health
• /
• v.40 no.4
• /
• pp.240-249
• /
• 2015

Objectives: Farmers are known to be exposed to a variety of allergens related to the work environment. This study was conducted to determine the sensitization rates as well as South Korea that they are sensitized to certain allergens farmers through the skin prick test. Methods: By targeting a total of 1143 people living in the rural town of Gyeonggi Province, it was conducted a questionnaire containing demographic and occupational risk factors and underwent skin prick tests with 15 types of allergens(including positive and negative controls). Multivariable logistic regression analysis was used to analyze the association between occupational risk factors and skin prick test positivity. Results: Except for the 30 people whose result is invalid, positive rate of the skin prick test was 18.6% in 1,113 people. The species of house dust mite, Dermatophagoides pteronyssinus and Dermatophagoides farinae was the highest at 8.7% and 8.6%. After adjusted by age, gender, smoking and education level, odds ratio of flower plant farmers is 4.467(95% CI: 2.094-9.527) and fruit farmer is 2.275(95% CI: 1.096-4.721). In addition, the rate of sensitization to grass pollen mixture of the flower plant farmers is significantly higher(15.9%, p<0.001) than other allergens. Conclusions: Even farmers, the rate of sensitization to allergens related to the general environment, such as house dust mite is relatively dominant. However, given the presence of potential cross-reactivity between the allergens or distribution showed that the unique aspects of allergen sensitization in the flower growers, occupational cause is not be completely ruled out.