• Analytical Science and Technology
• /
• v.16 no.1
• /
• pp.39-47
• /
• 2003

The measurement of radium ($^{226}Ra$) in the groundwater was established using ${\gamma}$-ray spectroscopy without sample preparation. The background interference by air borne radon daughter nuclides was reduced by $N_2$ gas flow into the counting chamber. Leakage of radon gas produced in the radioactive equilibrium with radium and its daughter nuclides was prevented by use of the air-tighted aluminium container. We investigated the effect of air layer in the counting container. Radioactivity variation due to emanation of radon into the air layer was within the counting error range 5%. When the nitrogen gas was flowed around the detector, peak counts of ${\gamma}$-rays from the daughters of airborne radon was decreased and detection limit was decreased to 0.02 Bq/L. The detection limit of detector was lower than 0.74 Bq/L, the $^{226}Ra$ Maximum Contaminant Level (MCL) in the groundwater proposed by US Environmental Protection Agency (EPA). It was confirmed that $^{226}Ra$ radioactivity in the groundwater could be determined by the ${\gamma}$-ray spectroscopy.

• Food Science and Industry
• /
• v.53 no.1
• /
• pp.33-42
• /
• 2020

In accordance with the recent trend of environmentally friendly agricultural policy, product registration of agricultural chitosan among the organic materials has been displayed in various forms such as soil improving agent, crop growth, and pest control. Chitin production industry is expected to bring competitiveness by producing low-quality and low-cost chitin for agriculture, rather than high-quality and high-cost for food, medical products. Since there are various soil microorganisms that can decompose chitin and chitosan in farm soil where crops are produced, it can be applied usefully to agricultural sites suitably for crop growth and pest control using chitin and chitosan as substrates. The purpose of this study is to compare and analyze the registration status of organic materials companies using chitin and chitosan raw materials in the organic materials information system of the NAQS, and to provide an opportunity to further expand the agricultural use of domestic chitin and chitosan.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.465-476
• /
• 2021

Scale and rust generation in water pipes is a common phenomenon when cast iron water pipes have been used for a long time. A physical water treatment device is known among various means for suppressing rust in a water pipe, and a zinc ionization device for putting zinc metal into a pipe and emitting the zinc cation into water is one of such devices. This research measured the amount of zinc ion generated, which is known to exhibit an effect of inhibiting rust and scale generation in a pipe, and examined the scale and rust inhibition effect of the ionization device installed for ground or building water supply. In the case of distilled water, the concentration of zinc ion increased by circulating water in the ionization device several times, and it was verified to be hundreds of ㎍/L, and in the case of discharging ground or tap water, it was verified to be tens of ㎍/L. In addition, a verification pipe was installed to confirm the change inside the pipe before and after installation of the zinc ionization device, and the internal condition of the pipe was observed 3 months to several years after installation. It was confirmed that the corrosion area of the surface of the pipe was no longer increased by installing a corrosion inhibitor, and if the pipe was already filled with corrosion products, the amount of corrosion products gradually decreased every year after installation. The phenomenon of fewer corrosion products could be interpreted as expanding the space in the pipe due to the corrosion product as Fe₂O₃ adhered to the inner surface of the pipe and turned into a smaller black Fe₃O₄. In addition, we found that scale such as CaCO₃ together in the corrosion by-products gradually decreased with the attachment of the ionization device.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.2
• /
• pp.111-118
• /
• 2014

The electrochemical properties using the cells assembled with the synthesized $LiCoO_2$(LCO) were evaluated in this study. The LCO was synthesized from high-purity cobalt sulfate($CoSO_4$) which is recovered from the cathode scrap in the wastes lithium ion secondary battery(LIB). The leaching process for dissolving the metallic elements from the LCO scrap was controlled by the quantities of the sulfuric acid and hydrogen peroxide. The metal precipitation to remove the impurities was controlled by the pH value using the caustic soda. And also, D2EHPA and $CYANEX^{(R)}272$ were used in the solvent extraction process in order to remove the impurities again. The high-purity $CoSO_4$ solution was recovered by the processes mentioned above. We made the 6 wt.% $CoSO_4$ solution mixed with distilled water. And the 6 wt.% $CoSO_4$ solution was mixed with oxalic acid by the stirring method and dried in oven. $LiCoO_2$ as a cathode material for LIB was formed by the calcination after the drying and synthesis with the $Li_2CO_3$ powder. We assembled the cells using the $LiCoO_2$ powders and evaluated the electrochemical properties. And then, we confirmed possibility of the recyclability about the cathode materials for LIBs.

• Journal of Periodontal and Implant Science
• /
• v.27 no.4
• /
• pp.751-765
• /
• 1997

Periodontal disease is a bacterially causal by disease, To remove plaque and bacteria, it has been necessary to prescribe chemical drug to patient to subjugate therapeutic unvalue by mechanical scaling. As a patient on a high dosage of the antibiotics to maintain the effective concentration may produce unfavorable side effects, this decase demands the Slow-release local drug delivery system. The object of the experiment is to study on the slow-release local drug delivery effects of calcium sulfate compounded with tetracycline that mainly used in periodontal disease. Experimental groups were divided into four classes as follow: Group 1 10% tetracycline compounded modified calcium sulfate paste. Group 2 : compounded and hardened 10% tetracycline and calcium sulfate. Group 3 : compounded 10% tetracycline and calcium sulfate, used Just before hardened. Group 4 : tetracycline-ethylene vinyl acetate fiber. In the four groups, release concentration, it's durability and the period of absorption by times are observed and concluded as follow: 1. An effective concentration($4{\mu}g/ml$) remained until 5 weeks in group 1, 9 days in group 2, 7 days in group 3, 15 days in group 4. 2. It was fully fused at 11.8 days average in group 2 and 14.8 days average in group 3. . There were no statistically significant results in tetracycline concentration until a week in group 2 and 3(p<0.05) These results suggest that tetracycline loaded calcium sulfate release sufficient tetracycline and fused in $11{\sim}14$ days, so calcium sulfate is useful carrier as slow release local drug delivery system.

• Applied Microscopy
• /
• v.30 no.4
• /
• pp.357-365
• /
• 2000

Paneth cells have been suggested to contribute to the elimination of excess metals into the intestinal lumen. The purpose of this study wat to investigate the changes of the zinc pools in rats subjected to functional loading with zinc salt by mean of both light and electron microscopical autometallography (AMG). Wistar rats 4 were administrated with zinc chloride (20 mg/kg body weight) intraperitoneally dissolved in 1 ml distilled water. The control group received 1 ml saline IP. After further one hour the animals were transcardially perfused with 0.4% sodium sulphide dissolved in 0.1 M PB fellowed by 3% glutaraldehyde solution for 10 minutes. Pieces of ileum were frozen with solid $CO_2$ and sectioned on a cryostat. The sections $(20{\mu}m)$ were autometallographically developed. Sections selected for EM were reembedded on top of a blank Epon block, from which ultrathin sections (100 nm) were cut. The ultrathin sections were double stained with uranyl acetate (30 min) and lead citrate (5 min), then examined under electron microscope. Studies of comparable sections from control and zinc loaded animals with the AMG selenium method gave quite different results. The control animals demonstrated a weakly positive staining in the cytoplasm of the Paneth cells. In the electron microscope the AMG silver grains were found to be located in the cytoplasm, while the electron dense secretary granules and other cell organelles were void of staining. Few AMG grains were located at the apical surface of the Paneth cells. In sections from zinc loaded rats, the AMG grains were seen in abundance in the lumen of the Lieberkuhn crypts at light microscopic levels. At EM levels the zinc revealing silver grains were located in the cytoplasm as in the controls, but much more AMG grains were shifted into the secretary granules. Furthermore, profound AMG grains were found in the lumen of the crypts and surrounding vessels. And a few grains were seen in the endothelium. The AMG technique demonstrated a pattern of AMG grains in the Paneth cells that strongly suggests a transport of zinc ions through these cells.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.1
• /
• pp.59-70
• /
• 2013

This study was to suggest cultural landscape preservation, value creation, as well as utilization plan to help landscape development of Hahoe village by identify the existence of Okyeonsipyeong(玉淵十詠) natural features, which were set around Buyongdae(芙蓉臺) in Hahoe Village by Seoae(西崖) Ryu, Seongryong(柳成龍), and understanding their characteristics and meanings of natural features and meanings. Based on the writings of "Okyeonseodanggi" and "Okyeonsipyeong", the major results of this study are as belows. 'Okyeon(玉淵)' letters carved on the rocks, also known as the name of pavilion in Okyeonjeongsa(玉淵精舍), is the center of Okyeonsipyeong that symbolizes the enlightenment of clean noble man, as well as the symbolic locational expression of studying room. One of Okyeonsipyeong, 'Wansimjae', is assumed to be the name from the combination of two Buddhist names, 'Wanjeok(玩寂)' and 'Seshim(洗心)', 'Dangho(堂號)', lined on both sides with Wonlakjae, the residence of Seoae, as the center. Wansimjae is after all the natural feature indicating the overall Okyeonjeongsa as the core of Okyeonsipyeong with west edge Gyeomamjeongsa(謙巖精舍). Among ten Okyeonsipyeong natural features, Wansimjae(玩心齋), Ganjukmun(看竹門), Gyeomamsa(謙菴舍), Dalgwandae(達觀臺), Ssangsongae(雙松厓), and Dohwacheon (桃花遷) are on the right side of the stairway from Okyeonjeongsa to Gyeomamjeongsa, while Chuwoldam(秋月潭), Neungpadae(凌波臺), Gyeseonam(繫船巖), and Jijuam(砥柱巖) are on the road to the cliff under river cliff in Buyongdae as well as to the dock, and all are located within 500m radius close and diameter area. As the results of lexeme and context analyses of Okyeonsipyeong poet, they are mainly about Confucian teachings symbolizing the constancy of the classical scholar including ego becoming one with the nature and back to the nature, unworldliness and farsighted view, transcendence and seclusion, as well as integrity spirit. In Dohwacheon and Gyeomamsa poets, there is Tao characteristics and brotherhood that pursue fairylands such as Mooreungdowon(武陵桃源). To create tourism brand and landscape of Okyeonsipyeong, it is necessary to prepare storytelling plans including the letters carved on the rocks introduction in Buyongdae area, and also synopsis of the Silgyeongsusang musical, 'Buyongjiae(芙蓉之愛)' that is related to 10 natural features. In addition, the related plans of the experience road from Gyeseonam, which is the boat stop in Buyongdae, to Ganjukmun of Okyeonjeongsa, and again to viewing routes on the stairways to Gyeomamjeongsa using boats are necessary. For preliminary preservation and maintenance plans, the safety of the stairway from Okyeonjeongsa to Gyeomamjeongsa should be secured, the rock inscription should be preserved, landscape interpretation plates should be installed, trees and shrubs around Dohwacheon rock inscription should be removed, Dalgwandae letters carved on the rocks should be restored, and the bamboo forest outside Ganjukmun as well as Prunus persica plantation around Dohwacheon should be pointed out.

• Journal of Korea Soil Environment Society
• /
• v.2 no.2
• /
• pp.9-24
• /
• 1997

Surfactant-aided in situ soil flushing has been proposed as an alternative for the expensive and time consuming 'pump and treat' technology in remediation of contaminated soil and groundwater Injected surfactants can effectively solubilize contaminants sorbed to the soil matrix or nonaqueous phase liquids(NAPLs) in residual saturation. The contaminants solubilized in groundwater are recovered and treated further. The theoretical background of the technology and the results of the field operations, mostly in the US. were summarized. In addition, the factors crucial to the successful application of the technology were discussed. Cost analyses and technical limitations in current applications were also discussed. In conclusion, it is likely that in situ surfactant flushing become a viable option for soil remediation in limited cases. Currently, further advances with respect to operation cost and to treatment efficiency are required for more extensive application of the technology. However, the current trends in soil remediation, specially the growing emphasis on risk based corrective action and natural attenuation, will increase the competitiveness of the technology. For example, removal of easily washable contaminants by short term soil flushing followed by long term monitoring and natural attenuation can greatly reduce the operation cost and time.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.336-344
• /
• 1996

The extraction of trace cobalt, copper, nickel, cadmium, lead and zinc in urine samples of organic and alkali metal matrix into chloroform by the complex with a dithizone was studied for graphite furnace AAS determination. Various experimental conditions such as the pretreatment of urine, the pH of sample solution, and dithizone concentration in a solvent were optimized for the effective extraction, and some essential conditions were also studied for the back-extraction and digestion as well. All organic materials in 100 mL urine were destructed by the digestion with conc. $HNO_3$ 30 mL and 30% $H_2O_2$ 50 mL. Here, $H_2O_2$ was added dropwise with each 5.0 mL, serially. Analytes were extracted into 15.0 mL chloroform of 0.1% dithizone from the digested urine at pH 8.0 by shaking for 90 minutes. The pH was adjusted with a commercial buffer solution. Among analytes, cadmium, lead and zinc were back-extracted to 10.00 mL of 0.2 M $HNO_3$ from the solvent for the determination, and after the organic solvent was evaporated, others were dissolved with $HNO_3-H_2O_2$ and diluted to 10.00 mL with a deionized water. Synthetic digested urines were used to obtain optimum conditions and to plot calibration-eurves. Average recoveries of 77 to 109% for each element were obtained in sample solutions in which given amounts of analytes were added, and detection limits were Cd 0.09, Pb 0.59, Zn 0.18, Co 0.24, Cu 1.3 and Ni 1.7 ng/mL, respectively. It was concluded that this method could be applied for the determination of heavy elements in urine samples without any interferences of organic materials and major alkaline elements.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.135-146
• /
• 2011

Steel structures have been generally painted to prevent corrosion damage. However, the painted film is deteriorated with increase in service life, and then corrosion damage resulting in cross sectional area occurs on steel surface. As a result, the buckling strength of steel structures can be decreased due to the corrosion damages. The evaluation method of the axial buckling strength of columns about a variety of section shapes and supporting conditions have been presented, but evaluation method of buckling strength about irregular nonprismatic columns is not established. In this study, the axial buckling strength of corroded steels was evaluated based on the buckling test results of corroded steel specimens that were cut off at a temporary steel structure. The corroded specimens were picked up total 10 specimens according to various slenderness ratio from the web of a temporary structure's main beam. The length of specimens is 200, 300, 400, 500 and 600mm respectively. The rust productions were removed by the chemical treatment. Then, the surface geometry was measured at intervals of $1{\times}1mm$ by using the optical 3D digitizing system, and the residual thickness of the specimens was calculated. The axial buckling test was performed on 10 corroded specimens and 12 non-corroded specimens under the fixed-fixed support condition. From the test results, the effect of corrosion damages on axial buckling load was investigated. Regardless of corrosion damage degree, the axial buckling strength of corroded specimens and non-corroded specimens was evaluated identically by using minimum average residual thickness or average residual thickness to minus its standard deviation. Reasonable measuring intervals of residual thickness was proposed by using the results to apply for practical works.