• 한국공간정보시스템학회:학술대회논문집
• /
• 2002.03a
• /
• pp.65-70
• /
• 2002

도로표지는 도로 이용자에게 목적지까지의 방향, 거리, 경로 안내 등 기타정보를 제공함으로써 안전하고 원활한 교통흐름을 제공하여 도로의 이용 효율을 극대화할 수 있는 중요한 도로 부속시설물이다. 이 시설물의 설치 기준인 도로표지규칙의 일부 기준이 미흡하고 운영 및 관리담당 기관이 일원화되지 않아, 전문적 도로표지 관리가 용이하지 않은 실정이다. 이에 도로표지의 통합적 전문적 관리와, 그에 따른 도로표지의 신속하고 정확한 조사가 필요하게 되었다. 본 연구에서는 최적의 조사시스템을 도출하기 위하여 도로시설물의 조사를 위한 여러 방법과 시스템을 비교하고 그 장단점을 분석하였다. 또한, 수치지도를 바탕으로 한 도로망도를 추출하고 DGPS 측량을 실시한 도로망도를 이용하여 현지조사를 실시하였다. 현지 조사 시스템을 공간정보, 속성정보로 구성된 데이터베이스, 표지판등록 및 GPS프로그램으로 구성된 응용프로그램, 소프트웨어와 경로탐색용 네비게이션, 노트북, 디지털카메라, GPS로 구성된 하드웨어로 구성하여 현지조사에 사용하였다. 현지조사 작업은 차량에 설치된 디지털카메라를 이용하여 원격조정으로 도로표지의 사진을 촬영하고, GPS를 이용하여 위치를 측정하였다. 현지조사 시스템은 지도의 축척에 맞는 정확도로 조정이 가능하며, 도로표지 조사뿐만 아니라 교통표지 및 그 외의 도로시설물의 조사에도 활용하고, 무선통신을 이용한다면 실시간 정보의 수정 및 입력이 가능할 것으로 판단된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.148-150
• /
• 2002

본 논문은 모바일 핸드셋이라는 제한적인 디스플레이 환경과 입력환경에서 필요한 라우트맵의 시각화에 따른 문제점과 그 해결방안을 제시한 논문이다. 자동차 네비게이션 시스템에서 널리 사용되는 경로표시 방법은 일반적으로 노트북이나, PDA, 전용 디스플레이 시스템등에서 구현되어 있으나, 모바일 핸드셋과 같이 제한된 디스플레이 환경에서의 경로표시 방법은 현재까지 많은 연구가 이루어지지 않고 있다. 본 논문은 인간의 인식능력이 임의의 경로를 회전방향점(turning point)의 연속으로 인식한다는 점에 착안하여 원래의 경로가 가진 축적을 변형하여 선분과 회전방향점으로 경로를 표시하는 라인 드라이브 시스템을 모바일 환경의 경로표시 방법으로 사용하였다. 본 논문에서 구현한 시스템은 GIS의 벡터 정보를 가지고 있는 서버와 Brew 플랫폼을 지원하는 모바일 핸드셋으로 구성된다. GIS 서버는 프로토타입 정보를 추출하여 모바일 핸드셋으로 전송하고, 이러한 정보는 모바일 핸드셋의 Brew 플랫폼에서 간략화, 도식화 과정을 거쳐서 시각화된다. 본 논문은 제한된 디스플레이 환경의 경로 확대표시를 위하여 계층별 경로 시각화 방법을 사용하여 가독성을 높이고 사용상의 편리함을 추구한다.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.45-50
• /
• 2008

In previous study, it showed that the MAP was greatly effective polishing process for magnesium plate. But it had lower efficiency than magnetic materials such as SM45C. It was very difficult to cut non-magnetic materials using the MAP process because the process was fundamentally possible by help of a magnetic force. This study aimed to verify analytically formation of the magnetic field in a case of the non-magnetic materials especially focused on magnesium plate. So, In this study, the magnetic density flux was predicted using simulation program. As a result, the magnetic density flux was lower at the center of pole on inductor than outside. It had same result on the experimental verification. And magnetic force was lower according to increase of working gap. So, to improve the magnetic force, permanent magnet was installed under the workpiece. In that case, the magnetic density flux not only at center but also at outside of pole was increased. Therefore, the efficiency of magnetic abrasive polishing was also increased. A design of experimental method was adopted for assessment of parameters' effect on the MAP results of magnesium plate for improving the magnetic force.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2007

In this paper, we propose an unmanned patient monitoring system design and performance of a motion capture and sound detection. Unmanned patient monitoring system can be used in the greek koma and meaning deep sleep patient to need 24 hour surveillance. To monitoring, we used laptop, CCTV camera (or PC camera), A/D converter, microphone and detection program. The detection program based on the frame difference method and sound level meter. It had several functions such as data collecting and storing. All of this system was tested in several the simulations of emergency situations. It can be expected that an unmanned patient monitoring system can be used in emergency situation and patient care.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1039-1040
• /
• 2006

The resonant converters cause the high voltage stress according to the input voltage, which increases the conduction loss in converter power switches. The topology of LLC half bridge resonant converter provides ZVS characteristic and also the stress of voltage and current is not higher than that of the general resonant converters. So we can expect the higher efficiency. In this paper, the LLC resonant converter is designed for the notebook computer adapter. In the adapter design, we should consider the weight, the size and overheat of the adapter. Thus the higher efficiency is an essential particular. First of all, the optimal design of transformer is the most important facts. Some parameters should be considered in order to get the highest efficiency. The adapter is designed through the considering of these parameters including the PFC circuit of the pre-regulator. It converts AC line input into about $400V_{DC}$ Link voltage of the LLC converter input and the converter has $16V_{DC}/90W$ ratings. The efficiency measured is about up to 92%.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.2
• /
• pp.37-43
• /
• 2003

The purpose of this thesis is to detect multiple vehicles using sequence image analysis at process that detect forward vehicles and lane from sequential color images. Detection of vehicles candidate area uses shadow characteristic and edge information in one frame. And, method to detect multiple vehicles area analyzes Estimation of Vehicle(EOV) and Accumulated Similarity Function(ASF) of vehicles candidate areas that exist in sequential images and examine possibility to be vehicles. Most researches detected a forward vehicles in road images but this research presented method to detect several vehicles and apply enough in havy traffic. To verify the effects of the proposed method, we capture the road images with notebook and CCD camera for PC and present the results such as processing time, accuracy and vehicles detection in the images.

• Journal of The Korean Association of Information Education
• /
• v.22 no.5
• /
• pp.605-611
• /
• 2018

On-Line Lectures are becoming more common due to the MOOK service and the expansion of national policy in Korea. Especially, It is being changed to new remote mixed style from traditional lecture in universities. We propose and implement a remote contents making tool with audio synchronization function based on more with less resources. To implement our proposed algorithm, we design an interactive interface to assign multiple cutting intervals and convert an input video to print a new result. In experimental, we can confirm our algorithm works properly with average performance value 9.3% cpu share ratio and 87mega byte ram usage(CPU 2.60GHz, 820*600 Area).

• 전자공학회논문지 IE
• /
• v.47 no.3
• /
• pp.14-18
• /
• 2010

In this paper, we describe a CMOS DC-DC converter with a variable output voltage(5-7V @100mA) for a portable battery-operated system applications. The proposed DC-DC converter is used along with a Pulse-Frequency Modulation (PFM) method and consists of reference circuit, a feedback resistor, a controller, and an internal oscillator. The integrated DC-DC converter with two external passive components(L,C) has been designed and fabricated on a 0.5um 2-poly 3-metal CMOS process and could be applied to the Personal Digital Assistants(PDA), cellular Phone, Laptop Computer, etc.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.425-428
• /
• 2002

To understand and forecast the wireless internet market in Korea, we will analyse the network externalities in wireless internet market into communication network externalities and hardware/software network externalities. The wireless market has two competing streams, one is mobile internet and the other is wireless fan internet. Both are characterized by strong network externalities which lead to increasing return to stale. Mobile internet is supposed more suitable for communication and WLAN for data. However these two system will compete in some area, and the critical factor to deride the winner is supposed to be the network externalities as in so many other high-tech industries had showed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.685-687
• /
• 2013

Today, as wireless communications devices such as laptops, smart phones are generalized, wireless LAN has been widely installed in the corporate office conference rooms, industrial warehouses, Internet-ready classrooms, and even in a coffee shop. Though a wired network can be accessed and attacked only by the physical penetration, the wireless network which can be accessed anywhere within the reach of anyone has relative vulnerability by unauthorized users' attack. To defend these vulnerabilities, the introduction of WIDS / WIPS is required. In this paper, we recognize the limitations of WLAN security technology, review the current technology trends and propose the solutions in the future security problems.