• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.492-501
• /
• 2007

Coastal disasters have become one of the most important issues in every coastal country. In Korea, coastal disasters such as storm surge, sea level rise and extreme weather have placed many coastal regions in danger of being exposed or damaged during subsequent storms and gradual shoreline retreat. A storm surge is an onshore gush of water associated with a tow pressure weather system, typically in typhoon season. However, it is very difficult to predict storm surge height and inundation due to the irregularity of the course and intensity of a typhoon. To provide a new scheme of typhoon damage prediction model, the scenario which changes the central pressure, the maximum wind radius, the track and the proceeding speed by corresponding previous typhoon database, was composed. The virtual typhoon scenario database was constructed with individual scenario simulation and evaluation, in which it extracted the result from the scenario database of information of the hereafter typhoon and information due to climate change. This virtual typhoon scenario database will apply damage prediction information about a typhoon. This study performed construction and analysis of the simulation system with the storm surge/coastal inundation model at Masan coastal areas, and applied method for predicting using the scenario of the storm surge.

• Korean Journal of Animal Reproduction
• /
• v.23 no.4
• /
• pp.313-321
• /
• 1999

The purpose of these study was to investigate the use of a glass micropipette (GMP) as a vessel for vitrification of bovine IVP blastocysts, to compare the post-thaw survival rates of bovine blastocysts frozen in GMP with those frozen in OPS that have been previously investigated, and to improve the hatching rate following vitrification with GMP method. The GMP vessel permits higher freezing and warming rate than the OPS due to the higher heat conductivity of the glass and lower mass of the solution that contains the embryos. Groups of three bovine IVP blastocysts were sequentially placed into vitrification solution before being loaded into either the OPS or GMP vessels and immersed into L$N_2$within 20 to 25 sec. Post-thaw blastocysts were serially washed in 0.25 and 0.15 M sucrose in HM and TCM-199 for each 5 min, respectively, and then cultured in TCM 199 supplemented with 10% FCS for 24 h. The rate of blastocyst re-expanding did not significantly different for OPS (75.9%) and GMP (80.0%) methods (P＞0.05). The hatching rates in OPS (34.1%) and GMP (37.5%) methods were significantly lower than that in control group (54.3%) (P＞0.05). In addition, the rate of blastocyst re-expanding was significantly lower if blastocysts were vitrified in the wide portion of the micropipette rather than the narrow portion of the micropipette (83.3 vs 56.7%) (P＞0.05), even though three blastocysts were loaded per vessel. The hatching rate in 0.05% pronase solution treatment for 30, 60 and 90 see (45.9, 54.7 and 57.5%) were significantly higher than that in control (35.0%), even though there was not significantly different between 30 see and control. These results indicate that both vitrification vessels can provide high survival rates of bovine IVP blastocysts. However, the GMP vessel has the advantage over the OPS, in that the former does not need a cap to protect the vessel from floating after immersion in L$N_2$. The location of the embryos (narrow or wide portion of immersion) were considered to be limiting factors to the viability of bovine IVP embryos. The exposing in 0.05% pronase solution for 60 or 90 see can increase hatching rates of post-thaw bovine IVP blastocysts.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.505-511
• /
• 2010

Odontoma represents 22% of all odontogenic tumors, which is characterized by slow growth pattern. Most of the odontomas usually develop during dental follicle proliferation. The growth of odontoma is limited and lesion is generally asymptomatic. It is frequently diagnosed during assessments for delayed eruption of permanent tooth and is usually founded in the second decade of life. Odontoma is usually diagnosed through radiographic views and is difficult to diagnose at the early developmental stage of odontoma. But an uncalcified developing odontoma can disturb the eruption of the tooth, so it is important to perform periodic radiographic examinations. Treatments are surgical removal and observation of odontoma followed by surgical opening or orthodontic traction of impacted tooth according to the tooth development and the location of impacted tooth. In this case, we found the radiopaque calcified odontoma in the radiographic view meanwhile follow up of the impacted tooth showing idiopathic eruption disturbance. This suggests that a developing odontoma is the cause of eruption disturbace.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.194-199
• /
• 2006

쌍천유역의 강수량과 지하수위의 관계를 분석한 결과 융설효과를 확인하였고 갈수기에 지하수위가 현저히 저하됨을 확인하였다. 쌍천유역의 지하수위와 GOI의 상관관계를 분석한 결과 70일 이동평균값을 이용한 GOI가 가장 높은 상관관계를 보여주었다. 융설효과를 고려하기 위해서 먼저 유역의 DEM 자료를 이용하여 100m 간격으로 고도별 면적분포를 구하고 기온이 100m당 $0.5^{\circ}C$씩 감소하는 것을 고려하여 강수사상이 발생하면 $0^{\circ}C$ 이하가 되는 고도에서는 강설사상이 발생하는 것으로 가정하였다. 이 때 고도별 면적분포에서 구해지는 면적비를 고려하여 강수사상을 강우와 강설로 나누었다. 이후에 고도를 고려한 기온이 $0^{\circ}C$ 이상인 날에 그 고도의 설적이 모두 녹는 것으로 가정하였고 강우가 발생한 것으로 처리하였다. 유역평균 일최대침투량을 알아내기 위하여 강수량자료를 일정값 이상은 고정하여 수정된 강수량자료로 70일 이동평균값을 구하고 이 값들과 지하수위와의 상관관계를 분석해 본 결과 40mm가 일최대침투량으로 가정하였을 때 가장 높은 상관관계를 보여주었다. 쌍천유역의 경우 40mm가 한계침투량이다. 이렇게 수정된 강수자료를 이용하여 이동평균을 구하여 지하수위와의 상관관계를 구해본 결과 쌍천유역의 2003년부터 2005년까지 2개년 자료에 대해서 융설을 고려했을 때 상관관계가 더 높아짐을 알 수 있고 한계침투량을 고려했을 때도 상관관계가 더 높아짐을 알 수 있으며 융설효과와 한계침투량을 동시에 고려했을 경우에 가장 높은 상관관계를 얻을 수 있었다.$2.8g/cm^3$로 가정했을 때, 경상분지의 화강암류의 압력평균값이 약 $0.73{\sim}3.16kbar$의 범위를 가졌고, 경상분지내 백악기 화강암류의 정치 깊이는 $2.6{\sim}11.4km$범위를 가졌다. 이는 경상분지 화강암류에 대해 유추된 기존의 정성적인 생각과 일치한다는 것을 알 수 있었고, 각섬석의 $Al^T$함량을 이용한 여러 경험적, 실험적인 압력계가 많은 제한점이 있지만 경상분지의 백악기 불국사화강암류에는 정성적으로 유효함을 알 수 있었다. 우리는 최종적으로 경상분지내 백악기 화강암류는 천부관입 암체이고 노출된 화강암류가 천부지각이라는 것을 알 수 있었다. 것이 아니라 낙관적 예측을 수행하는 경향이 있음을 발견할 수 있었다.원밭, 화산회밭으로 6개 유형으로 분류할 경우 각각의 분포면적은 41.9%, 23.3%, 17.5%, 13.9%, 1.1. 2.2% 이었다. 도시화 및 도로확대 등 다양한 토지이용 및 지형개변으로 과거의 토양정보가 많이 변경되었다. 그래서, 앞으로는 인공위성자료 및 항공사진을 이용하여 빠르고 쉽게 활용할 수 있는 토양조사 방법개발과 기 구축된 토양도의 수정, 보완 작업이 필요한 절실히 요구되고 있는 현실이다.브로 출시에 따른 마케팅 및 고객관리와 관련된 시사점을 논의한다.는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.534-540
• /
• 2013

Interest of the hand effect on the electromagnetic wave are internationally increasing with the increase of the use of the mobile phone. IEC TC106(International Electrotechnical Commission, Technical Committee 106) promotes international research exchange program in order to reflect the effect of human hands in the standard assessment method of human exposure dosimetry by the electromagnetic wave of mobile phones. Since current commercialized hand phantom is manufactured by taking into account the average size of westerners and provides only one grip posture, it imposes many restrictions on the accurate SAR measurement. Therefore, the development of proper hand phantom accounting for domestic situation and various grip posture capability is essential in order to analyze the accurate effect of human hand on the exposure estimation. In this paper, a jelly hand phantom suitable for Korean was manufactured with various grip posture capability at 835 MHz and 1,800 MHz bands. Although the tolerances of permittivity and conductivity of the manufactured hand phantom are with ${\pm}10%$ each, it was much less than CTIA(Cellular Telecommunication Industry Association) tolerance of ${\pm}20%$ at both bands. Its 3D CAD(3 Dimensional Computer Aided Design) file which was developed can be utilized for the simulation of human hand effect on SAR measurement of mobile phones. The findings in this study can be utilized for the analysis of human hand effect on SAR measurement of a mobile phone.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.7
• /
• pp.141-149
• /
• 2014

This paper describes a method to insert and detect watermark or fingerprint to/from videos in low-computing powered system as Android platforms. Fingerprint, which is a kind of watermark, has features such as patterns that contain information. The inserting frame numbers in video-stream and the positions in a picture were chosen from the encrypted user ID to insert the watermarks. The used encrypt algorithm is the HIGHT algorithm which was developed for low-computing powered systems by KISA(Korean Internet & Security Agency). Subtracting an inferred picture from the previous picture was used to extract a candidate feature. Median filtering was used to get rid of noise and stabilize the candidate feature. New algorithm that reduces calculating steps of the median filtering was developed and applied for low-specification systems. The stabilized features were accumulated over 150 times and calculated by correlation coefficient method to recognize the patterns. We examined 22 videos and successfully detected the patterns from 21 videos. The correlation coefficient r values that we examined through this study exceeded over 0.79 more than the threshold (0.7).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.209-218
• /
• 2012

Recently, the Field Programmable Stateful Logic Array (FPSLA) was proposed as one of the most promising system integration technologies which will extend the life of the Moore's law. This work is the first proposal of the FPSLA design automation flow, and the approaches to logic synthesis, synchronization, physical mapping, and automatic placement of the FPSLA designs. The synchronization at each gate for pipelining determines the x-coordinates of cells, and reduces the placement to 1-dimensional problems. The objective function and its gradients for the non-linear optimization of the net length and placement density have been remodeled for the reduced global placement problem. Also, a recursive algorithm has been proposed to legalize the placement by relaxing the density overflow of bipartite bin groups in a top-down hierarchical fashion. The proposed model and algorithm are implemented, and validated by applying them to the ACM/SIGDA benchmark designs. The output state of a gate in an FPSLA needs to be duplicated so that each fanout gate can be connected to a dedicated copy. This property has been taken into account by merging the duplicated nets into a hyperedge, and then, splitting the hyperedge into edges as the optimization progresses. This yields additional 18.4% of the cell count reduction in the most dense logic stage. The practicality of the FPSLA can be further enhanced primarily by incorporating into the logic synthesis the constraint to avoid the concentrated fains of gates on some logic stages. In addition, an efficient algorithm needs to be devised for the routing problem which is based on a complicated graph. The graph models the nanowire crossbar which is trimmed to be embedded into the FPSLA fabric, and therefore, asymmetric. These CAD tools can be used to evaluate the fabric efficiency during the architecture enhancement as well as automate the design.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.473-480
• /
• 1996

영광 3/4호기 mid-loop 운전중 잔열제거(RHR) 기능 상실사고시 열수력적 현상을 최적 전산코드인 CATHARE2를 이용하여 해석하였다. 이러한 사고시 열수력적 현상은 일,이차측 냉각재 방출유로와 계통내 비응축성 가스의 거동에 의해 크게 영향을 받는다. 본 연구에서는 2개의 경우를 모의하였는데, 하나는 계통내 방출유로가 있는 경우이며 다른 하나는 방출유로가 없는 경우를 계산하였다. 이 때 사용된 가정은 다음과 같다. (가) 계통은 부분충수 운전 상태로 상부에 비응축성 가스나 증기로 가득 차 있다. (나) 증기발생기는 1대만이 이용 가능하고 이차측은 습식보관 상태이며, 보조급수는 공급되지 않고 이차측 압력은 대기압 상태이다 (다) 사고는 원자로 정지후 2일후 발생한다. 이와같은 조건하에서 사고시 계통 최대압력은 방출유로가 있는 경우 사고후 6,000 초에 0.27 MPa이며, 방출유로를 통한 유량은 총 2.4 kg/s이다. 이 방출유량을 외삽하여 계통수위가 고온관 바닦까지 도달하는데 걸린 시간은 사고후 약 5.67시간이다. 증기발생기 U-튜브를 통한 열전달에 의해 이차측 증기 발생으로 이차측 수위가 하락하면 증기발생기 reflux cooling은 제한을 받을 수 있다. 이 경우 이차측 수위가 U-튜브의 active 영역 상부까지 도달하는데 걸리는 시간은 사고후 약 10시간으로 계산되었다. 그러므로 이 경우 보조급수 공급 여유시간보다 노심 노출시간이 더 빨리 도달하여 노심을 손상시킨다. 사고시 수위지시계는 계통감압에 큰 영향을 주지 못하기 때문에 가능한 빨리 닫아 계통 inventory를 유지하는 것이 이차측 보조급수공급보다 우선한다.합한 설계방안으로 분석되었다.크다는 단점이 있다.TEX>$_2$O$_3$ 흡착제 제조시 TiO$_2$ 함량에 따른 Co$^{2＋}$ 흡착량과 25$0^{\circ}C$의 고온에서 ZrO$_2$와 $Al_2$O$_3$의 표면에 생성된 코발트 화합물을 XPS와 EPMA로 부터 확인하였다.인을 명시적으로 설명할 수 있다. 둘째, 오류의 시발점을 정확히 포착하여 동기가 분명한 수정대책을 강구할 수 있다. 셋째, 음운 과 정의 분석 모델은 새로운 언어 학습시에 관련된 언어 상호간의 구조적 마찰을 설명해 줄 수 있다. 넷째, 불규칙적이며 종잡기 힘들고 단편적인 것으로만 보이던 중간언어도 일정한 체계 속에서 변화한다는 사실을 알 수 있다. 다섯째, 종전의 오류 분석에서는 지나치게 모국어의 영향만 강조하고 다른 요인들에 대해서는 다분히 추상적인 언급으로 끝났지만 이 분석을 통 해서 배경어, 목표어, 특히 중간규칙의 역할이 괄목할 만한 것임을 가시적으로 관찰할 수 있 다. 이와 같은 오류분석 방법은 학습자의 모국어 및 관련 외국어의 음운규칙만 알면 어느 학습대상 외국어에라도 적용할 수 있는 보편성을 지니는 것으로 사료된다.없다. 그렇다면 겹의문사를 [-wh]의리를 지 닌 의문사의 병렬로 분석할 수 없다. 예를 들어 누구누구를 [주구-이-ν가] [누구누구-이- ν가]로부터 생성되었다고 볼 수 없다. 그러므로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\

• Journal of Aquaculture
• /
• v.3 no.1
• /
• pp.89-125
• /
• 1990

In order to improve top shell seed production techniques spawning and larvae rearing were done in rearing tanks. Growth of young top shell in the nursing ground were also investigated. For induced spawning, top shells were maintained in still water during night time. Then they were treated with ultra violet iradiated sea water after dried up in air for 60 minutes. Spawning rate were 10 to $39.77\%$. It was found that young top shells moved in the growing grounds from nursing grounds when they reached approximately 30-40mm in shell heignt. Among main food algae for top shell in the natural growing grounds, sea mustard were melted away during June. Therefore, presence of another food algae such as Ecklonia cava or Sargassum spp. seems to be the main limiting factor for survival of top shell during summer. The tolerance of top shells ranging from 30mm to 60mm to low density of seawater for were tested at the temperature between 29.5 and $31.4^{\circ}C$. Hundred percent mortality occoured in 20, 55 and 90 hours after first stocking at the specific gravity of 1.010, 1.015, and 1.020, respectively.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.29-36
• /
• 2017

The design fire based on the heat release rate (HRR) of combustibles can significantly affect the assessment of fire safety in the performance-based design (PBD). In the present PBD, however, limited information in the foreign literature has been used without further verification due to the lack of fire information in domestic combustibles. The objective of this study is to provide information on the HRR and fire growth rate for various combustibles in residential and office spaces. To end this, the fire experiments were carried out with single and multiple combustibles. The peak HRR of combustibles used in the present study had a range of 36 kW~1,092 kW. The fire growth rates were also $0.003kW/s^2{\sim}0.0287kW/s^2$ and $0.003kW/s^2{\sim}0.0838kW/s^2$ for the residential and office spaces, respectively. In particular, a sofa had the highest fire risk in terms of the peak HRR and fire growth rate. Finally, a methodology for calculating the peak HRR in a space was proposed through correlation analysis between the peak HRR and exposed surface of various combustibles.