• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.95-104
• /
• 2006

Hysteresis is a common feature exhibited in hydraulic properties of an unsaturated soil. This study focuses on hysteresis observed in a compacted weathered granite subgrade soils based on the pressure plate laboratory tests. It was found that the Soil-Water Characteristics Curve of a soil is hysteretic and unique. The results also show that the wetting and drying curves predicted using the Fredlund and Xing model is quite close to the laboratory-measured results. For a specific matric suction, water content or coefficient of permeability on a wetting curve is always lower than those found on a drying curve.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.115-127
• /
• 2006

The purpose of field monitoring system in KHC-Test Road is to provide the performance data for environmental loadings from pavement surface. Among them, water content reflectometer(WCR) are used for measuring the volumetric water content of pavement subgrades. However, WCRs are not well-calibrated based on the local field conditions. A need therefore exists for improving equations for predicting water content using the proper field and laboratory calibrations. Based on the study performed, calibrations based on various soil characteristics and density conditions are well fitted to the data from fields. So, it is recommended to use the suggested general calibration of WCR to the compacted subgrade soils in test road for predicting the volumetric water content.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.69-78
• /
• 1993

A testing system has been developed to evaluate the seasonal variation of the resilient modulus of granular subgrade soils. Two sites were successfully instrumented with soil moisture-temperature cells to monitor over a period of one year, the field temperature and moisture content underneath the pavement. Multiple regression equations were developed to determine the resilient modulus under environmental conditions. It is noted that the use of the effective resilient modulus at the location of the Average Depth of Significant Stress (ADSS) provides a reasonable basis for determining subgrade properties. In addition, a theoretical model has been developed to predict the resilient modulus due to the change of temperature and moisture condition.

• Journal of Korean Society of Transportation
• /
• v.16 no.2
• /
• pp.99-105
• /
• 1998

이 논문은 포장체 하부구조내 공동(空洞)현상에 대한 위치를 규명하는데 있어서 신속하면서, 간단하고 신뢰성있는 방법을 제시하고자 한다. 동적관입시험(DCP)을 사용하여 콘크리트 슬라브하부의 노상토에 대한 강도를 측정하였다. 타격회수에 대한 침하의 양으로 측정되는 동적관입침하율을 비교하여 포장체하부의 연약지반에 대한 위치를 규명하였다. 콘크리트 포장체 하부의 공동(空洞)현상 및 연약화된 노상토에 대한 정보를 얻고자 하는 엔지니어를 위하여 시험방법 및 결과분석 등을 현장시험을 통하여 체계적으로 설명하였다.

• 한국도로학회:학술대회논문집
• /
• 2004.10a
• /
• pp.27-34
• /
• 2004

• 한국도로학회:학술대회논문집
• /
• 1999.11a
• /
• pp.29-34
• /
• 1999

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.141.2-141.2
• /
• 2009

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.17-23
• /
• 2009

Deformational characteristics of subgrade soils are very important input parameters for pavement design. It is necessary to make an amount of effort to estimate experimentally the modulus of subgrade soils. In case of designing simple (or lower level) pavement section, the estimation of the modulus based on experiments must cause an excessive cost. It has proposed various empirical correlation models to estimate the modulus from basic properties of the materials or more simple alternative tests. Seven subgrade soils in Korea were tested in this study. It was founded that the deformational characteristics of subgrade soils in Korea has a close relation to strength characteristics, the empirical correlation model was proposed. There was a close relation between cohesion value and modulus at low confining stress ($r^2=0.93$). By comparing with the measured modulus and the modulus determined by proposed correlation model from strength characteristics, the value of the coefficient of determination ($r^2$) is 0.75.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.33-40
• /
• 1988

In this study, effects of the density of soil and the confining pressure applied to the soil sample on the elastic moduli of subgrade soils are experimentally analyzed. Through investigation of subgrade materials of domestic expressways, five typical types of subgrade soils are selected for the experiments. A series of unconsolidated undrained triaxial tests is performed on samples prepared with various water contents and densities at the confining pressures of 1.02, 2.04, and $3.06kg/cm^2$. Initial tangent modulus is inferred from the unloading-reloading portion of the stress strain curve obtained during an individual loading-unloading-reloading test. As a result of the analysis, it is found that the effect of the confining pressure on the elastic modulus of subgrade material is well consistent with the equation proposed by Janbu, and that the elastic modulus can be related to the dry unit weight expressing the Janbu constants as exponentiial functions of it. It is also found that the water content has little effect on the elastic modulus for the samples with the degree of saturation less than 70%.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.87-93
• /
• 2006

To evaluate the deformational characteristics of subgrade soils, four subgrade samples in Korea were tested using the RC and TS tests with various dry unit weight and water content. Both the maximum modulus and normalized modulus reduction curves of subgrade soils were affected by the dry unit weight. The normalized modulus was decreased about 20% with increasing of relative compaction of 5%. It was founded that the variations of modulus of subgrade soils in Korea were over 40% with water content variation of $\pm$2%, and those effects can be estimated by exponential model. However, the normalized modulus reduction curves were almost identical and independent of water content. It was also founded that confining pressure, loading frequency, dry unit weight, and water content have an affect on modulus of subgrade soils independently. Therefore, it can be considered that those effects are independent variables.