• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.132-135
• /
• 1998

This study was conducted to obtain basic information for soil improvement in flower crop cultivating greenhouse soil through survey on the chemical and physical properties of greenhouse soils. Total of 85 Flowcultivating farms were surveyed and analysis was done on the soil characteristics, amounts of chemical fertilizer and soil amendmentuse. The result are as follows: In soil properties of flower cultivating greenhousees, silt clay loam was 51%and 68% of the surveyed soils had good drainage condition. Ground water table was over 90-120cm which was optimum range for flower cultivation. Flower cultivating farms had problem with accumulation of fertility. Nitrate nitrogen was accumulated in Gypsophila paniculate farms and available phosphorus, and exchangeable postassium were significantly higher in greenhouse soils about 2 times than in open field soil. Application amount of chemical feltilizers in greenhouses were nitrate 211,phosphorus 135, and potassium 132kg/ha, respectively. Amount of organic matter used in greenhouse were high in order of cattle manure> compost> organic fertilizer> poultry manure> swine manure and their application amounts were69, 103, 32, 20, and 43 MT/ha, respectively.

• Korean Journal of Food Science and Technology
• /
• v.13 no.3
• /
• pp.181-187
• /
• 1981

The changes in the chemical composition of yeast extracts during autolysis and their effect to the sensory quality were studied with baker's yeast, Saccharomyces cerevisiae. The amounts of extracted solids, proteins, amio-N. amino acids, especially glutamic acid, alanine and lysine, increased by the autolysis time up to 48 hrs. The results of sensory evaluation made by the multiple paired comparision test and Duncan's test indicated a significant difference is taste by the time of autolysis. In the profile test, the flavor character notes expressed by the panel were 17 different characters, 11 in aroma and 6 in taste. The character notes and the intensity of flavor changed with the time of autolysis. The sharp and beany flavor of the extracts which was autolyzed for 4 hours turned into meaty and worty flavor by 48 hours of autolysis. A proper arrangement of the flavor characters in the quantitative descriptive chart could provide a weighted value of the flavor grade. The aroma grade index and the taste grade index correlated to the amplitudes of the profile test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.26-33
• /
• 2016

Recently, the use of transformer-less UPS has increased to improve the efficiency of UPS. However, transformer-less UPS is required in three-phase four-wire input IGBT PWM rectifier and the existing three-phase three-wire PFC algorithm cannot be applied in the three-phase four-wire system due to the neutral current problem of UPS input. To control the three-phase four-wire input IGBT PWM rectifier, there are two existing algorithms: 3D SVM and single phase control method. These two algorithms have advantages/disadvantages in controlling the rectifier. The single phase control method is unstable for controlling the rectifier and the 3D SVM method has a problem that must increase the L value of the input-side inductor considerably. Therefore, this paper proposes digital single phase control technology and another new algorithm considering the d-q control, to improve the characteristics of the existing control algorithm. In addition, this paper performed a simulation and experiment based on the proposed control algorithm. The simulation results showed that the proposed technology can control three-phase four-wire IGBT PWM rectifier in a stable manner and can also reduce the neutral current. The proposed algorithm is a useful tool for controlling the three-phase four-wire IGBT PWM rectifier.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5550-5558
• /
• 2015

Recently, fuel cell with high energy efficiency and low CO2 emission is energetically interconnected with power system. Especially, FCGS(Fuel Cell Generation System) which usually operates at high temperature, is being developed and installed in the form of large scale system. However, it is reported that power system disturbances related to surge, harmonic and EMI have caused several problems such as malfunction of protection device and damage of control device in the large scale FCGS. In order to solve these problems, this paper presents a modeling of operation characteristics of FCGS by PSCAD/EMTDC, ETAP, P-SIM software. And also, this paper proposes countermeasure algorithms to prevent power system disturbances. From the simulation results, it is confirmed that the proposed algorithm is useful method for the stable operation of large scale FCGS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.461-471
• /
• 2004

Recently, subscribers have strong desire to get QoS based personalized services in high-speed Internet access. Service providers have been rapidly replacing ADSL, cable broadband access networks with Metro-Ethernet based VDSL. But, it is difficult for Motto-Ethernet based broadband access networks to provide QoS based personalized services, because already deployed network elements cannot distinguish subscribers by specific traffic characteristics. In this paper, when the access network has tree topology, we show that it is possible to provide QoS for each downstream flow with only per flow traffic shaping at the edge node without QoS functions in access networks. In order to show that our suggested scheduling algorithm at the edge node can support the assured service in tree topology access networks, we evaluated its performance by simulation. The suggested scheduling algorithm can shape per-flow traffic based on the maximum bandwidth, and guarantees minimum bandwidth per flow by modifying the DRR scheduler. Simulation results show that congestion and loss in the access network elements are greatly reduced, TCP performance is highly enhanced and loss for assured CBR service flows is reduced by only shaping per-flow traffic at the edge node using our proposed scheduling algorithm.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.5
• /
• pp.293-302
• /
• 2008

The limiting factors to determine available soil depth were studied with 390 soil series in soil profile description and physicochemical data in Korean soils. The limiting factors were coarse sandy layer, gravel and skeletal layer, hardpan layer, cat clay layer, poorly drained layer, salt accumulated layer and bed rock layer so on. The soils of having limiting factors were 332 soil series, but soils without limiting factors were 58 soil series. Soils with limiting factors were, hardpan 5, slopeness 93, immature soil 29, cinder 5, sandy 42, gravel or skeletal 47, bedrock 19, high salt content 8, poorly drained soil 22, heavy clay 32, sulfate soil 3 and ash soil 27 etc. And the orders of available soil depth were immature > slopeness > ash > heavy clay > sandy > gravel or skeletal > hardpan > cindery > poorly drained > bedrock > acid sulfate soil > salt accumulated soil etc.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.2
• /
• pp.186-191
• /
• 2002

A malignant fibrous histiocytoma is a malignant soft tissue neoplasm that occurs frequently in the metaphyseal ends of the long bones of adults. The lung is a common site for metastasis but it is a rare site for a primary malignant fibrous histiocytoma. Here we report a case of a primary malignant fibrous histiocytoma of the lung. The patient was a 53-year-old man who presented with a moderate amount of a left pleural effusion and an illdefined mass in the left lower lobe on a chest radiograph and a local invasion to the left 10th and 11th rib on chest CT. Under the strong suspicion of lung cancer with a pleural invasion, a serial diagnostic thoracentesis was performed. The cytologic examination of the pleural effusion revealed no malignant cells. Consequently, a thoracoscopic pleural biopsy was performed. The histological examination revealed slender spindle cells and scattered epitheloid cells arranged in a vague storiform or a whirling pattern. Immunohistochemicaily, the tumor cells tested positive for vimentin and negative for cytokeratin, desmin, CD 34 and PAS. These features were consistent with a malignant fibrous histiocytoma. This case is an unusual addition to the small number of published reports on a primary malignant fibrous histiocytoma of the lung.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.723-730
• /
• 2016

Solar cells in a PV module are connected in series and parallel to produce a higher voltage and current. The PV module has performance characteristics depending on solar radiation and temperature. In addition, the PV system causes power loss by special situations, including the shadows of the surrounding environment, such as nearby buildings and trees. In other words, an increase in power loss and a decrease in life cycle can occur because of the partial shadow and hot-spot effect. Therefore, this paper proposes the optimal configuration algorithm of a bypass diode to improve the output of a PV module and one of a PV array to minimize the loss of the PV array. In addition, this paper presents a model of a PV module and PV array based on the PSIM S/W. The simulation results confirmed that the proposed optimal configuration algorithms are useful tools for improving the performance of PV system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1355-1363
• /
• 2015

In order to maintain customer voltage within allowable limit($220{\pm}13V$), tap operation of SVR(step voltage regulator) installed in primary feeder could be carried out according to the scheduled delay time(30 sec) of SVR. However, the compensation of BESS(battery energy storage system) is being required because the customer voltages during the delay time of SVR have a difficultly to maintain within allowable limit when PV system is interconnected with primary feeder. Therefore, this paper presents modeling of SVR to regulate voltage with the LDC(line drop compensation) method and modeling of BESS to control active and reactive power bi-directionally. And also, this paper proposes the coordination control modeling between BESS and SVR in order to overcome voltage problems in distribution system. From the simulation results based on the modeling with the PSCAD/EMTDC, it is confirmed that proposed modeling is practical tool for voltage regulation analysis in distribution system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1802-1809
• /
• 2009

Abstract The typical distribution systems have the power flow from distribution substations (sources) to customers (load) only as one direction. However, in the case where distributed generations (DG) such as PV system and wind power systems are connected to distribution systems, the DG output variations to distribution systems, so called reverse power flow, may cause the bi-directional power flow. So, the reverse power flow has severe impacts on typical power system, for example power quality problems, protection coordination problems, and so on. Especially, protection devices (sectionalizer) in primary feeder of distribution system interconnected with distributed generations may cause problems of malfunction, and then many customers could have problems like an interruption. So, this paper presents the bi-directional operation algorithm of protection devices to overcome the problems like mal-function. And, also this paper shows the effectiveness of proposed method by using both PSCAD/EMTDC software and test facility of protection devices to simulate the field distribution systems.