• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1149-1154
• /
• 2005

The finite difference lattice Boltzmann method(FDLBM) is a quite recent approach for simulating fluid flow, which has been proven as a valid and efficient tool in a variety of complex flow problems. It is considered an attractive alternative to conventional FDM and FVM, because it recovers the Navier-Stokes equations and is computationally more stable, and easily parallelizable to simulate for various laminar flows and a direct simulation of aerodynamics sounds. However, the research of a numerical simulation of turbulent flow by FDLBM, which is important to analyze the structure of turbulent flow in engineering fields, is not carried out. In this research, the FDLBM built in the turbulent model is applied, and a flowfield around 2-dimensional square to validate the applied model with 2D9V is simulated. Besides, 2D computation of the cavity noise generated by flow over a cavity at a Mach number of 0.1 and a Reynolds number based on cavity depth of 5000 is calculated. The computation result is well presented a understanding of the physical phenomenon of tonal noise occurred primarily by well-jet shear layer and vortex shedding and an aeroacoustic feedback loop.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.84-93
• /
• 1987

The study was done with a focus on making the optimum condition on phosphorylation of deoxyribonucleoside with o-chlorophenylphosphoroditriazole as a phosphorylating agent. The result showed that the addition of 5 volume % pyridine to the dioxane solution accelerated the rate of reaction to a great extent and turned out to nearly quantitative yields on phosphorylation. On the basis of this improvement of optimum reaction conditions, a more efficient method to synthesize all-protected dideoxyribonucleotide from N, 5-O-blocked deoxyribonucleoside was developed. The dodecamer with a Hind Ⅲ recognition site was readily synthesized from five different dimers which were prepared through the newly improved method.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.234-239
• /
• 2002

Acoustic sounds generated by a uniform flow around a two-dimensional circular cylinder at Re=200 are simulated using finite difference lattice Boltzmann method. A third-order-accurate up-wind scheme is used for spartial derivatives, and a second-order-accurate Runge-Kutta scheme is used for time marching. The results show that in capturing very small acoustic pressure fluctuation with same frequency of Karman vortex street compared with the pressure fluctuation around a circular cylinder. The propagation velocity of acoustic sound is presented that acoustic which approaches tire upstream due to Doppler effect in the uniform flow slowly propagates, while that for the downstream quickly propagates. It is also apparent that the size of sound pressure is proportional for central distance $r^{-1/2}$ of the cylinder.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.410-418
• /
• 2016

In this study, we prepared electrically conducting composites using epoxy resin of diglycidyl ether of bisphenol A (DGEBA) as a matrix, triethylenetetramine (TETA) as a hardener and nickel powder or multi-walled carbon nanotubes (MWCNTs) grafted with $-NH_2$ groups (MWCNT-$NH_2$) as electrically conducting fillers. Electrical conductivity of composite films were measured by coating on the slide glass with a doctor blade. We measured modification reactions of MWCNT and reaction of MWCNT-$NH_2$ with DGEBA epoxy resin by fourier transform infrared spectrometer (FTIR), thermogravimetric analyzer (TGA) and elemental analyzer (EA). Morphology of composites was investigated by scanning electron microscope (SEM) and sheet resistances of composites were measured by 4-point probe. We found $(9.87{\pm}1.09){\times}10^4{\Omega}/sq$ of sheet resistance for epoxy composite containing both 40 wt% nickel powder and 0.5 wt% of MWCNT-$NH_2$ as fillers, equivalent to epoxy composite containing 53.3 wt% nickel powder only as a filler.

• Journal of KIISE
• /
• v.41 no.12
• /
• pp.1075-1080
• /
• 2014

One of the important roles used to ensure victory in a war is to maximize the overall military forces and to make sure that the capability of the military forces can be sustained as much as possible. Although several researchers have proposed various possible methodologies for logistics support, no research trials have been undertaken to investigate logistics support that considers all relevant elements of such. Unlike previous in trials that consider and analyze the system fault ratio as the main methodology, we propose an approach that simultaneously decides and recommends logistic priority by reflecting and combining item costs, transportation, fault-ratio, and system complexity. Also, we designed an algorithm that can recommend optimized logistics support priority using stationary distribution.

• Journal of Food Hygiene and Safety
• /
• v.26 no.1
• /
• pp.70-75
• /
• 2011

A new and improved analytical method involving alkaline pyridine extraction was proposed to quantity chlorophyll contents in syrup and candy type chlorella products. The performance of analytical method was compared with the conventional Korea food standard method which involves acetone extraction. The application of sonication chlorophyll extraction form alkaline pyridine sample was also explored. The analytical procedure was validated by evaluating accuracy, precision and reproducibility. For liquid samples, the pyridine extraction method showed higher accuracy and precision compared to acetone extraction method. The CV values of pyridine extract method and the acetone extraction method were 18.82 and 40.0, and the accuracy to theoretical values were 106.3% and 78.1%, respectively. When sonication extraction method was applied to the pyridine extraction, the precision was improved as indicated by reduced CV values from 18.82 to 11.36. The improved performance of pyridine-sonication extraction was also validated by recovery test of chlorophyll that was previously spiked into the sample matrix. For solid matrix, the pyridine extraction method showed better performance in analysis of chlorophyll in solid food matrix (CV = 7.05) compared to conventional acetone extraction method (CV = 30.0). However, the accuracy to theoretical values of pyridine and acetone extraction methods only showed only 62.7% an 40%, respectively. The relatively low accuracy of pyridine extraction method (62.7%) was improved to 99.4% by applying additional sonication extraction method. The improved performance of applying additional sonication extraction was validated by standard deviation, CV values and accuracy to theoretical values.

• The Korean Journal of Pharmacology
• /
• v.31 no.1 s.57
• /
• pp.135-140
• /
• 1995

Glycation occurs by covalent binding between the carbonyl group of monosaccharides and the epsilon amino group of amino acid. It can alter the physiological function of proteins and causes the development of diabetic complications. In this study, the influence of glycation on protein binding of warfarin and dansylsarcosine was studied by equilibrium dialysis which was performed for 3 hours at $37^{\circ}C$ in the water bath. The high glycated albumin which contained $50{\pm}16%$ of glycated albumin bound less than natural albumin which contained $8.5{\pm}5.28%$ of glycated albumin, if drugs concentration were more than the albumin concentration. But only warfarin binding showed a significant difference of 6% (P<0.05) when the molar concentration ratio of warfarin per albumin was 3. In consideration of low therapeutic concentrations, low glycated albumin concentrations in the body, and rapid elimination of excessive free drugs, these small increaes of free warfarin concentrations by glycation of albumin are not considered as risk. factors for drug intoxication for diabetics, if renal functions are intact.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.21-27
• /
• 2015

The present study describes the process of producing low oxygen content alloy powder from Ti-6Al-4V and Ti-8Al-1Mo-1V (AMS 4972) alloy scraps using hydrogenation-dehydrogenation (HDH) and deoxidation in solid state (DOSS) processes. Each prepared powder was deoxidized with Ca contact and non-contact method to compare the deoxidation capability. It is known that the non-contact deoxidation method, using Ca vapor above the melting temperature $T_m$ of Ca, has greater deoxidation capability. However, Oxygen contents in Ti-6Al-4V and Ti-8Al-1Mo-1V powder after non-contact deoxidation method were higher than those after contact deoxidation method. Therefore, we investigate the effect of Al - the richest alloy element in theses Ti based metals - on the deoxidation processes.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.21-27
• /
• 2009

Resins were synthesized by mixing 1-aza-15-crown-5 macrocyclic ligand attached to styrene (a hazardous material) divinylbenzene (DVB) copolymer with crosslink of 1％, 2％, 5％ and 20％ by a substitution reaction. The characteristic of these resins was confirmed by the content of chlorine, element analysis, thermogravimetric analysis (TGA), surface area (BET), and IR-spectroscopy. The effects of pH, time, dielectric constant of solvents and crosslink on adsorption of metal ions by the synthetic resin adsorbent were investigated. The metal ion was showed a fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order of uranium ($UO_2^{2+}$) > manganese ($Mn^{2+}$) > praseodymium ($Pr^{3+}$). The adsorption was in the order of 1％, 2％, 5％, and 20％ crosslink resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.

• Korean Journal of Food Science and Technology
• /
• v.12 no.4
• /
• pp.263-271
• /
• 1980

Detoxified and deallergenized castor bean protein isolate was prepared from defatted castor bean pomace for use in animal feedstuffs and human foods. Succinylation and acetylation of the ${\varepsilon}-amino$ groups of the protein improved markedly the water solubility of the protein at $pH\;7{\sim}8$. The results of the amino acid analysis of the protein isolate revealed that the sulfur-containing amino acids and L-lysine were limiting amino acids and that succinylation and acetylation caused some little loss of the amino acid content. The L-methionine enriched plastein was synthesized from the protein isolate or the acylated protein isolates and DL-methionine ethyl ester by one step process with papain. By this method the extent of incorporation of L-methionine was about 50%. Pepsin hydrolyzed both unmodified and modified protein isolates at the same rate (about 92%). Tryptic hydrolysis, however, was less for the succinylated protein isolates (about 42%) and less for the acetylated protein isolates (about 26%). The protein efficiency ratio of L-methionine enriched protein isolate (about 2.5 weight %) was 90% that of reference casein. The protein efficiency ratio values of succinylated (88%) and acetylated (84%) protein isolate were 55 and 69% of reference casein, respectively.