• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.1
• /
• pp.53-63
• /
• 1999

ATM 네트워크에서 다양한 트래픽을 특성과 QoS 요구사항을 갖는 멀티미디어 서비스의 종단간 품질을 만족시키면서 망 자원을 효율적으로 이용하기 위해서는 가상경로(virtual path : VP) 의 적절한 배치 및 대역 할당을 통한 논리적 망의 구성, 호 접속 시의 종적 경로 설정, 그리고 그와 연계된 효율적인 동적 대역 관리가 필수적으로 요구된다. 본 논문에서는 새로운 호가 시도될 때 논리적 망의 설계에서 설정된 가상경로의 대역으로 호의 품질 요구사항을 만족 시킬수 없거나 또는 미리 설정해 놓은 가상경로연결(VP Connection) 이 존재하지 않을 경우에 물리적 링크의 잔여용량을 기반으로 적절한 가상경로를 선택하여 용량을 재조정하기 위한 최적 관리 모델로서 MHR (Minimum Hop Route), MCR(Maximum Capacity Route), 그리고 MRCR (MaxMin Residual Capacity Route)방식을 제안하고 이에 대한 최적화 정식을 제안하였다. 제안된 각 최적화 모델에 대한 해를 노드의 수가 m인 네트워크에서 O(m2)의 복잡도로 구할 수 있는 알고리즘을 제시하고 시뮬레이션을 통해 제안된 최적화 모델이 망의 성능에 미치는 영향을 평균 호 차단률 평균 이용 링크의 수 , 그리고 노드 쌍간의 호 차단률의 분산등에 의해 망 운용의 효율성과 공평성등을 비교분석하였다.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.495-507
• /
• 2005

Measuring the end-to-end available bandwidth in the Internet is a useful tool for distributedapplication services or QoS (Quality-of-Service) guarantee. To measure the end-to-end available bandwidth, Single-hop Gap model-based packet train measurement techniques are well-known. However, the error of packet train output gap can happen by network topologies. This error of the output gap causes the inaccuracy of the available bandwidth measurement. In this paper, we propose a new end-to-end available bandwidth measurement technique with accurate capacity measurement and fast convergence methods. To solve the erroneous capacity measurement problem of the back-to-back packet train transmission, we propose a new available bandwidth measurement method by decoupling the capacity measurement with the initial gap of the packet train. Also, we propose a new technique to predict the proper initial gap of the packet train for faster convergence. We evaluate our proposed method by the simulation in various topologies comparing with previous methods.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.717-724
• /
• 2005

In this paper, we Propose an efficient scheduler well suited for the next-generation wireless networks that can support multimedia traffic having various requirements. The scheduler is designed to provide each of multimedia classes with differentiated services. In particular, the scheduler is intended to maximize throughput and minimize packet loss ratio. To apply the scheduler, we suppose that the wireless network is based on TDD/CDMA system The scheduler assigns a packet in a dedicated uplink-slot to the user within a frame to operate scheduling of packets transmitted by the users belonging to the specific class in an efficient manner. Such a manner also enables the scheduler to meet different QoS requirements. The paper also includes performance comparison with other schemes and analysis of the proposed scheduling algorithm by using simulation. We also analyze the proposed scheme by using simulation. The simulation compares the proposed scheduling algerian with previously proposed schemes in terms of the performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.125-128
• /
• 2001

Earlier efforts on optical access concentrated on the design of PONs for the collection and distribution portion of the access network. PON architecture is very simple but it requires MAC protocol for control of upstream traffic. This paper proposes a MAC protocol for a broadband access network using an ATM Passive Optical Network supporting CBR/rtVBR, nrtVBR, ABR aild UBR traffic. For the proposed MAC scheme, we present grant field format, minislot format, and bandwidth allocation algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.31-40
• /
• 2004

Diff-Serv(DS) is a mechanism by which network service providers can offer differing levels of network service to different traffic, in so providing quality of service(QoS) to their customers. Because this mechanism has been deployed just for fixed hosts with the Token Bucket mechanism according to AggF(Aggregate Flow) instead of each flow, DS can not suggest effective usability of traffic resources. In this paper, we use WFQ mechanism for traffic conditioner and scheduling method monitoring the AggF and the results will be used to control the next flows coming in TC. So it will control traffic rate dynamically and suggest efficient usability of bandwidth.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.85-94
• /
• 2005

In this thesis, we propose a Speed Accommodation Priority Algorithm Scheme(SPAS) and Traffic Control Model Scheme (TCMS) to satisfy a desired handoff dropping probability and to reduce the blocking probability of new calls using mobility characteristics and handoff rate in mobile communication networks. The guard channels below threshold can guarantee the Quality of Service(QoS) in terms of the request handoff dropping probability and the guard channels above the threshold can be used to handle high priority new calls and high priority handoff calls. When the ratio of the handoff call arrival rate is less then the ratio of the new call arrival rate, the proposed method can guarantee the new call better than the previous guard channel scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6C
• /
• pp.571-580
• /
• 2002

In this paper, we relatively differentiate maximum delay for each Assured Service subclass in Differentiated Services by allocating bandwidth to each subclass differently. To maximize the throughput for the In-profile traffic and the link utilization, we propose a Cofiguration method of RIO and the admission control criterion based on the buffer size determined by the network topology and the ratio of bandwidth allocated to each subclass. Simulation results show that the proposed method can calculate the capacity to guarantee the QoS for the Assured Service and maximize the throughput for the In-profile traffic and the link utilization by applying the RIO parameter values set through the proposed configuration method.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1770-1780
• /
• 1997

Our problem is improvement of image quality because it is inevitable cell loss of image data when traffic congestion occurs. If cells are discarded indiscriminately in transmission of MPEG video data, it occurs severe degradation in quality of service(QOS). In this paper, to solve this problem, we propose two method. The first, we analyze the traffic characteristics of an MPEG encoder and generate high priority and low priority data stream. During network congestion, only the least low priority cells are dropped, and this ensures that the high priority cells are successfully transmitted, which, in turn, guarantees satisfactory QoS. In this case, the prioritization scheme for the encoder assigns components of the data stream to each priority level based on the value of a parameter ${\beta}$. The second, Number of high priority cells are increased when value of ${\beta}$ is large. It occurs the loss of high priority cell in the congestion. To prevent it, this paper is regulated to data stream rate as buffer occupancy with UPC controller. Therefore, encoder's bandwidth can be calculated renegotiation of the encoder and networks. In this paper, the encoder's bandwidth requirements are characterized by a usage parameter control (UPC) set consisting of peak rate, burstness, and sustained rate. An adaptive encoder rate control algorithm at the Networks Interface Card(NIC) computes the necessary UPC parameter to maintain the user specified quality of service. Simulation results are given for a rate-controlled VBR video encoder operating through an ATM network interface which supports dynamic UPC. These results show that dynamic bandwidth renegotiation of prioritized data stream could provided bandwidth saving and significant quality gains which guarantee high priority data stream.

• Journal of Broadcast Engineering
• /
• v.23 no.1
• /
• pp.104-114
• /
• 2018

Recently, as HTTP-based video streaming traffic continues to increase, Dynamic Adaptive Streaming over HTTP(DASH), which is one of the HTTP-based adaptive streaming(HAS) technologies, is receiving attention. Accordingly, many video quality control techniques have been proposed to provide a high quality of experience(QoE) to clients in a DASH environment. In this paper, we propose a new quality control method using ANFIS(Adaptive Network based Fuzzy Inference System) which is one of the neuro-fuzzy system structure. By using ANFIS, the proposed scheme can find fuzzy parameters that selects the appropriate segment bitrate for clients. Also, considering the characteristic of VBR video, the next segment download time can be more accurately predicted using the actual size of the segment. And, by using this, it adjusts video quality appropriately in the time-varying network. In the simulation using NS-3, we show that the proposed scheme shows higher average segment bitrate and lower number of bitrate-switching than the existing methods and provides improved QoE to the clients.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1211-1216
• /
• 2000

Asynchronous transfer mode (ATM) can be efficiently used to transport packet data services. The switching system will support voice and packet data services simultaneously from end to end applications. To guarantee quality of service (QoS) of the offered services, source rateot send packet data is needed to control the network overload condition. Most existing control algorithms are shown to provide the threshold-based feedback control technique. However, real-time voice calls can be dynamically connected and released during data services in the network. If the feedback control information delays, quality of the serviced voice can be degraded due to a time delay between source and destination in the high speed link. An adaptive algorithm based on the optimal least mean square error technique is presented for the predictive feedback control technique. The algorithm attempts to predict a future buffer size from weight (slope) adaptation of unknown functions, which are used fro feedback control. Simulation results are presented, which show the effectiveness of the algorithm.