• 베이커리
• /
• 3호통권392호
• /
• pp.90-93
• /
• 2001

• 발명특허
• /
• 제29권5호통권335호
• /
• pp.32-37
• /
• 2004

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1996년도 추계종합학술발표회 논문집
• /
• pp.527-531
• /
• 1996

• 안전기술
• /
• 제187호
• /
• pp.40-43
• /
• 2013

• 융복합기술연구소 논문집
• /
• 제2권2호
• /
• pp.20-24
• /
• 2012

In this paper, we perform a ANSYS simulation of assembly structure composed of three parts, bolt, nut, and coil spring, under the loading of a screw torque 640~800 ($N{\cdot}m$) derived from the given bolt tensile strength 10.9, which allows us to investigate a lock-nut mechanism for the prevention of bolt-loosening after three parts are fastened. And also we investigate the safety factor of each component with effective stress distribution obtained from the simulation, which enables us to estimate the structural safety of a new lock-nut structure. Both simulation and investigation shown in this paper will contribute to the development of a new lock nut structure.

• 한국항행학회논문지
• /
• 제18권3호
• /
• pp.248-252
• /
• 2014

본 논문에서는 자동차 부품업체의 조립 공정에서 압입이나 볼트, 너트 체결에 주로 사용되는 프레스와 너트러너는 정밀도와 생산성 향상이 지속적으로 요구한다. 여러 대의 압입 시스템을 복합적으로 구성한 후 동기화를 통하여 일괄적인 제어를 수행하는 생산 시스템으로 시리얼 통신을 이용한 저속의 멀티 서보 프레스 시스템을 개발하였다. 그 결과로 정밀도와 생산성이 향상되었고 제품에 대한 품질향상을 이룰 수 있었다.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.113-119
• /
• 2008

The purpose of the present paper is to investigate the optimal shape of the brake tube-end and flare nut for automobiles using the $DEFORM^{TM}-3D$, finite element code. A flare nut is a small and important part used to join a brake tube-end in automobiles. In this instance, we studied the optimal forging processes for the tube-end and flare nut. Finite element analysis has been carried out to predict an optimal shape of the tube-end and flare nut. Also the simulation results were reflected to the forging processes design for the tube-end and flare nut. The shape of the tube-end and flare nut is in agreement with the finite element simulation and the test results.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.83-89
• /
• 2004

Flare nut is an important Part that used to joint a brake tube-end in automobiles. It was made of SWCH 10A by machining. But we studied to make it by metal forming. The main focus of this paper is to investigate an optimal forging processes for flare nut using the DEFORM$^{TM}$-3D. commercially available finite element code and tests. Actually an explicit finite element analysis of the flare nut forging processes has been carried out to predict an optimal shape of the flare nut and its results were reflected in the tests of the forging processes design for flare nut. The simulation results which had obtained from finite element analysis were contributed to the forging processes design for flare nut. An optimal shape of nave nut showed agreements with test results. Furthermore. this paper should contribute to a development of the forging process for a variety of parts.s.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 춘계학술발표대회 개요집
• /
• pp.74-77
• /
• 2002

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.92-92
• /
• 2002