• 제목/요약/키워드: 냉풍

검색결과 62건 처리시간 0.029초

전처리 조건 및 건조방법에 따른 건조대추의 품질특성 및 항산화 활성 (Effects of Pretreatment and Drying Methods on Quality and Antioxidant Activities of Dried Jujube (Zizyphus jujuba) Fruit)

  • 김재원;이신호;노홍균;홍주헌;박창수;윤광섭
    • 한국식품영양과학회지
    • /
    • 제42권8호
    • /
    • pp.1242-1248
    • /
    • 2013
  • 건조 전처리와 건조방법에 따른 대추의 건조특성과 품질의 변화를 비교분석 하였다. 수분함량은 glyceol 전처리에서 유의적으로 낮았고 열풍건조가 천일 및 냉풍건조에 비해 건조효율이 높은 것으로 나타났다. 가밀도는 NaCl boiling 처리에서 가장 높았고, 가용성 고형분의 함량의 경우 열풍건조, 냉풍건조, 천일건조 순으로 높은 함량을 나타내었으며 전반적으로 glycerol 침지에서 높은 함량을 보였다. 적정산도는 열풍건조가 타 건조 방법에 비해 높은 값을 나타내었으며, 전처리에 따라서는 무처리 및 glycerol 침지에서 높은 경향을 나타내었다. 반면 boiling 처리 시 대추 고유의 산도는 저하되는 것으로 나타났다. 당산비의 경우 천일건조에서 가장 높았으며 다음으로 냉풍건조 열풍건조 순으로 나타났고, 전처리에 따라서는 NaCl boiling> glycerol> 무처리 순으로 높은 함량을 나타내었다. 갈변도는 열풍건조, 냉풍건조, 천일건조 순으로, 전처리 방법에 따라서는 NaCl boiling, 무처리, glycerol 침지 순으로 높은 값을 나타내었다. 적색도의 경우 무처리가 NaCl boiling 및 glycerol 침지에 비해 유의적으로 높은 경향을 나타내었으며, boiling 처리한 건조 대추의 경우 적색도는 감소하고 황색도는 증가하는 것으로 나타나 기호성이 다소 저하되는 것으로 관찰되었다. 건조방법에 따른 폴리페놀 함량은 열풍건조> 냉풍건조> 천일건조순으로 높은 함량이 검출되었으며, 전처리 방법 간에는 무처리 및 glycerol 침지가 NaCl boiling 처리에 비해 유의적으로 높았다. 반면 플라보노이드 함량에서는 boiling 전처리를 행한 모든 건조방법에서 높은 함량이 검출되었다. DPPH, ABTS 라디칼 소거활성은 유용성분의 함량과 항산화 활성간의 비례적인 상관관계를 나타내었으며, 열풍건조에서 유의적으로 높은 라디칼 소거활성을 나타내었다. 관능검사 결과 NaCl boiling 처리는 외관과 함께 품질이 가장 떨어지는 것으로 나타났으며, 종합적 기호도는 glycerol 침지가 가장 기호성이 높은 것으로 조사되었고 다음으로 무처리, boiling 순이었다. 이상의 결과 종합적 기호도 및 이화학적, 기능적 품질특성을 고려해 보았을 때 glycerol 전처리와 열풍건조 방법을 효과적으로 이용하는 것이 건조효율 증대 및 품질손상을 억제할 수 있는 방안이 될 것으로 사료된다.

건조방법에 따른 건조 전복 (Haliotis discus hannai)의 이화학적 특성 비교 (Comparison of the Physicochemical Properties of Meat and Viscera of Dried Abalone (Haliotis discus hannai) Prepared using Different Drying Methods)

  • 박정욱;이영재;박인배;신궁원;조영철;고소미;강성국;김정목;김해섭
    • 한국식품저장유통학회지
    • /
    • 제16권5호
    • /
    • pp.686-698
    • /
    • 2009
  • 생전복과 3가지 건조방법, 음건법, 냉풍건조법 및 진공동결건조법으로 건조한 전복의 육과 내장에 대하여 이화학적 성분을 분석 비교하였다. 생전복 육은 수분이 $78.88{\pm}1.01%$, 조단백질 $9.24{\pm}0.27%$ 및 탄수화물 $10.05{\pm}0.81%$ 이었다. 건조 전복 육의 경우 수분은 냉풍건조가 $18.38{\pm}0.91%$로 가장 많았으며, 진공동결건조 한 것이 $1.05{\pm}0.05%$로 가장 적은 함량을 보였다. 생전복 내장은 육과 비교하여 조단백질은 적었지만 다른 성분은 많았다. 생전복은 구성아미노산 총함량이 $17,124.05{\pm}493.18\;mg%$이고, glutamic acid가 $2,233.93{\pm}64.34\;mg%$로 가장 많았으며, 주요 구성아미노산으로는 aspartic acid, glycine, valine leucine, lysine, arginine 및 proline 등 이었다. 음건 전복 육의 총 함량은 $12,969.92{\pm}583.65\;mg%$, 냉풍건조는 $13,328.78{\pm}653.11\;mg%$ 이었다. 전복 내장은 육과 비교하여 총 구성아미노산 함량은 적었다. 생전복 육의 유리아미노산 총 함량은 $4,261.99{\pm}106.55\;mg%$ 이며, arginine, taurine, glutamic acid, proline 및 glycine 등이 주요 유리아미노산 이었다. 이와 비교하여 건조한 전복 육은 음건법 $6,336.50{\pm}285.15\;mg%$, 냉풍건조법 $5,072.04{\pm}248.53\;mg%$ 및 진공동결건조법 $4,638.85{\pm}218.03\;mg%$ 등으로 생전복 육보다 적은 함량이었다. 생전복 내장은 $2,920.74{\pm}73.02\;mg%$ 이고, 건조한 경우는 냉풍건조법이 $9,189.95{\pm}450.31\;mg%$로 가장 많았으며, 다음으로 음건법이 $5,037.18{\pm}272.01\;mg%$ 이었다. 생전복 육의 경우 포화지방산이 $47.00{\pm}0.99%$, 단일불포화지방산이 $22.18{\pm}1.05%$ 및 다가불포화지방산이 $30.82{\pm}1.45%$ 이었고, 내장은 각각 $36.72{\pm}0.74%$, $25.44{\pm}1.12%$$37.84{\pm}1.67%$ 이었다. 콘드로이친황산 함량은 생전복의 경우 육에서 $11.95{\pm}0.35%$, 내장에서 $7.71{\pm}0.19%$의 함량을 보였다. 음건법의 경우 각각 $16.57{\pm}0.90%$$9.24{\pm}0.50%$이고, 냉풍건조법은 $16.17{\pm}0.79%$$12.44{\pm}0.61%$이며, 진공동결건조는 $25.17{\pm}1.16%$$15.22{\pm}0.70%$로 가장 많은 함량이었다. 콜라겐 함량은 생전복 육이 $69.80{\pm}3.07\;mg/g$이고, 내장이 $40.62{\pm}1.79\;mg/g$ 이었다. 음건법으로 건조한 전복의 육과 내장은 각각 $144.05{\pm}7.78\;mg/g$$44.16{\pm}2.39\;mg/g$ 이었으며, 냉풍건조 전복은 $133.29{\pm}6.53\;mg/g$$69.20{\pm}3.39\;mg/g$ 이고, 진공동결건조 전복의 경우는 각각 $137.51{\pm}6.33\;mg/g$$60.61{\pm}2.79\;mg/g$ 이었다. 휘발성염기질소는 생전복 육이 $10.10{\pm}0.44\;mg%$, 내장이 $19.01{\pm}0.84\;mg%$ 로서 내장이 육보다 높은 값이었다. 이러한 경향은 건조한 전복에서도 일치하였다. 음건법육에서 $136.77{\pm}7.37\;mg%$ 이고, 내장에서 $197.97{\pm}10.69\;mg%$로 나타내었으며, 냉풍건조 육이 $27.32{\pm}1.34\;mg%$, 내장이 $71.37{\pm}3.50\;mg%$이였다. 진공동결건조 육과 내장은 각각 $16.23{\pm}0.75\;mg%$$21.53{\pm}0.99\;mg%$로 나타났다.

건조방법을 달리한 감말랭이의 이화학적 및 관능적 품질 특성 (Physicochemical and Organoleptic Qualities of Sliced-dried Persimmons as Affected by Drying Methods)

  • 김연주;이수진;김미영;김귀란;정헌식;박현주;김미옥;권중호
    • 한국식품과학회지
    • /
    • 제41권1호
    • /
    • pp.64-68
    • /
    • 2009
  • 청도 반시를 원료로 하여 건조 방법(열풍건조, 냉풍건조, 감압 건조 및 적외선건조)에 따른 감말랭이 제품의 이화학적, 관능적 품질 특성을 평가하였다. 감말랭이의 무게는 9.30-12.01 g 범위, 길이는 3.55-4.06 cm 범위, 너비는 3.17-3.73 cm범위, 두께는 1.82-2.04 cm 범위를 각각 나타내었다. 감말랭이의 경도는 열풍건조가 가장 높았고 다음으로 적외선건조, 냉풍건조 및 감압건조의 순이었다. 감말랭이의 색도(명도, 적색도 및 황색도)는 대체적으로 열풍건조가 높은 경향이었으며, 적외선건조는 명도가 낮았고 감압 건조는 황색도 및 적색도가 낮은 경향이었다. 수분 함량은 38.04-46.41%의 범위를 나타내었고, 가용성 고형분 함량은 42.96-$48.44^{\circ}Bx$의 범위로서 수분함량과 상반되는 결과를 보였다. 페놀함량과 DPPH 라디칼 소거능은 적외선 및 감압 건조가 높게 나타났는데, 감말랭이는 건조방법에 상관없이 대체로 높은 항산화활성을 나타내었다. 관능적 품질평가에서 전반적기호도는 감압건조법이 가장 양호하였고, 다음으로 적외선건조, 열풍건조 및 냉풍건조 순이었다. 이상의 결과에서 건조 방법을 달리한 감말랭이 제조에서 품질특성은 상당한 차이가 발생하였으며, 현행 건조방법 중 감압 건조법이 감말랭이의 이화학적 품질과 관능적 평가에서 가장 양호한 것으로 확인되었다.

환경영향을 고려한 고속절삭가공의 경제성 평가 (Evaluation of the Economics of High Speed Machining Considering Environmental Effects)

  • 장윤상;김선태
    • 청정기술
    • /
    • 제12권3호
    • /
    • pp.182-189
    • /
    • 2006
  • 본 연구에서는 생산성 향상을 위하여 적용 분야가 점차로 확대되고 있는 고속 절삭가공의 경제성 및 환경비용을 평가하였다. 가공시간 및 가공비용이라는 절삭공정의 경제성 평가 모델과 더불어 수학적으로 모델링 된 절삭유제의 손실량 및 폐 유제 처리비용을 이용하여 환경비용을 고려한 절삭공정의 생산비용을 분석하였다. 분석에는 CBN 볼 엔드밀을 사용한 고속가공과 여러가지 냉각방식을 적용한 고속 선삭가공 공종에 대한 공수수명 및 공구마모 실험 데이터를 이용하였다. 고속 밀링가공에서 절삭속도가 높을수록 생산비용은 작아져서 고속가공의 장점을 그래도 보여주었다. 압축공기, 냉풍, 수용성 절삭유제, 건식 절삭의 네 가지 냉각방법을 사용한 선삭가공의 분석에서는 절삭유제를 이용한 냉각방식이 절삭유제를 사용하지 않은 방식에 비하여 공수수명의 향상으로 생산비용이 작았으나 환경비용을 고려하면 냉풍을 이용한 냉각방식이 생산성과 환경영향의 모든 면에서 가장 우수하였다.

  • PDF

초저온 냉풍시스템을 이용한 환경친화적 가공의 성능평가 (Performance Evaluation of Environmentally Conscious Machining using Super Low Temperature-Cold Air System)

  • 배정철;이승상;강명창;김정석
    • 한국기계가공학회지
    • /
    • 제1권1호
    • /
    • pp.48-54
    • /
    • 2002
  • In industrially advanced countries, environmentally conscious machining was eagerly studied because of ecological and economical reasons. As the environmental regulations become stricter, new machining technologies which take environmental aspects into consideration are being developed Industry and research institutions established applications for dry, semi-dry, oil-mist and compressed cold air machining. This paper investigates the performance of new compressed cold air system for environmentally conscious machining and evaluates machinability of dry and new compressed cold air machining. A series of tests are carried out using measuring eqipments under dry and compressed cold air machining.

  • PDF

환경친화적 가공을 위한 냉풍시스템의 성능평가 (Performance Evaluation of Compressed Cold Air System for Environmentally Conscious Machining)

  • 강명창;김정석;이득우;이승상
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.1008-1011
    • /
    • 2002
  • In industrially advanced countries, environmentally conscious machining was eagerly studied because of ecological and economical reasons. As the environmental regulations become stricter, new machining technologies which takes environmental aspects into consideration are being developed. Industry and research institutions established applications for dry, semi-dry, oil-mist and compressed cold air machining. This paper investigates the performance of new compressed cold air system for environmentally conscious machining and evaluates machinability of dry and new compressed cold air machining. A series of tests are carried out using measuring equipments under dry and compressed cold air machining.

  • PDF

환경 친화적인 세미드라이 선삭가공 특성 (Characteristics of Environment-friendly Semi-dry Turning)

  • 이종항;오종석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1997년도 추계학술대회 논문집
    • /
    • pp.385-388
    • /
    • 1997
  • As the environmental regulations become stricter, new machining technologies are being developed which takes envi ronmenta 1 aspects into account . Since cut t ing oi I has some impact on environment. many researches are being carried out to minimize the use of cutting oi I. The methods for minimizing cutting oil usage includes the following techniques: I ) Cooling of tools and work piece. 2) Useage of compressed cooling air for the removal of chip. 3) Minimal useage of environment-friendly vegetable cutt:ngoiI for lubrication between chip and tools. Since the turning machine is continuous, tools are under constant thermal load and tool wear increases as the lubricative performance degrades. Also surface roughnesses have a direct influence on turning. In order to examine the characteristics of turningmachining, this work investigates experimentally the degree of tool wear and characteristics of surface roughness in relation to machining conditions, supply methods, and cooling methods.

  • PDF

히트펌프를 이용한 고효율 냉풍 대형 건조기 유동 최적설계 (Optimal Flow Design of High-Efficiency, Cold-Flow, and Large-size Heat Pump Dryer)

  • 박상준;이영림
    • 한국생산제조학회지
    • /
    • 제20권5호
    • /
    • pp.547-552
    • /
    • 2011
  • Drying process, corresponding to a final process in the area of food engineering, requires a lot of heat energy. Thus, the energy efficiency is very important for dryers. Since the energy efficiency of heat pump dryers is much higher compared to that of electric dryers or other types of dryers, most of large-capacity dryers are adopting heat pump. In this study, shapes, positions and number of air-circulating fans, guide vanes, air inlet, outlet and top separator were varied for optimization of the flow of a large-capacity heat pump dryer. In addition, fans were modelled with performance curves and porous media were assumed for foods and heat exchangers. The simulation results were applied to the 12-ton dryer and the velocity distributions were experimentally examined. Finally, uniform drying in time was successfully accomplished through frozen pepper experiment.

복합 냉풍 건조기 개발 (Development of the mixed desiccant cooling dryer)

  • 최현웅;김영일;박승태;유경록
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.242-247
    • /
    • 2009
  • The present study has been conducted to reduce the cold air drying rate. According to the cold air drying method, the quality-excellent product could be made and there would be little change of color, taste and smell. As compared with the hot air drying, the cold air drying equipment has the superior dehumidification in a constant drying zone. However, in a falling drying zone that equipment is not energy-efficient because the drying period could be longer by the dehumidificated.

  • PDF

복합형 냉풍건조기 실험에 대한 검토 (Study in the Mixed Cooling Dryer Experiment)

  • 최진영;김세환;박승태;이정호
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.254-259
    • /
    • 2009
  • The mixed cooling dryer has been developed significantly by adopting both advantages of cooling dryers and desiccant dryers. In this study, it is introduced that the desired effect, such as drying rate period reduction and energy-saving, could be achieved only by adding the desiccant dryer if an existing cooling dryer is used. The experiment should be conducted for quite long time due to the material selection, so it is regrettable that there are not enough data.

  • PDF