• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.32 no.7
• /
• pp.27-33
• /
• 2003

본고는 수송용 냉동차량의 신기술동향에 관한 것으로, 냉동차량의 시스템 개량, 대체냉매용 냉동차량의 개발, 진공 단열기술, 신개념의 냉동수송 기술동향 등을 소개한 것이다.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.210-211
• /
• 2013

냉동차량은 이동 또는 정차 중에도 냉동 부하에 일정 온도를 유지 시켜야한다. 종전의 상용차량에 냉동시스템은 차량의 엔진과 연계하여 압축기를 구동하거나 엔진과 연계된 발전기의 전력을 이용하여 일정 온도를 유지하였다. 이러한 방식은 제어가 쉽지 않고 효율이 낮은 단점을 가지고 있다. 본 논문에서는 이러한 단점을 개선하고자 냉동차량이 정차 중인 무시동 기관에서도 일정 온도를 유지 할 수 있도록 센서리스 제어방식이 적용된 3상 인버터를 제안하였다.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.159-163
• /
• 2019

The food service industry has been grown due to improvement of living standards. In addition, the demand for frozen food delivery is increasing day by day at online/offline and the refrigerated vehicles are used in most of these food distributions. One of the most important factors in a refrigerated car is to measure the temperature accurately. Conventional temperature recording systems are generally connected directly to temperature sensor modules. Since the temperature data are transmitted to the temperature recorder by using the electric wire, there is a disadvantage that the resistance error must be compensated according to the cable length. In this paper, we propose a method to correct errors due to cable resistance using digital processing and CAN (Controller Area Network) communication. We use PT-1000 platinum sensor to increase the accuracy of the temperature measurement.

• Journal of Food Hygiene and Safety
• /
• v.32 no.2
• /
• pp.107-113
• /
• 2017

To understand of the present state for temperature management of cold and frozen food transportation vehicles, we surveyed and measured the temperatures of eight transportation vehicles (including 3 small & medium and 5 large businesses) in Jeonbuk province, Korea. In the transportation vehicles of small & medium businesses, the mean temperature of cold and frozen foods was $8.35{\pm}5.72^{\circ}C$ and $-3.45{\pm}16.88^{\circ}C$; in large businesses, $3.92{\pm}1.44^{\circ}C$ and $-15.38{\pm}2.98^{\circ}C$, respectively. In the difference of temperature by the locations within transportation vehicles, the difference in each cold and frozen was $2.40{\pm}1.45^{\circ}C$ and $2.37{\pm}2.52^{\circ}C$, as a mean. But there was not statistically significant difference in locations between cold and frozen (p > 0.05). In the difference of surface temperatures on various foods before and after door opening during the loading, the temperatures of cold and frozen foods increased by $0.55^{\circ}C$ and $1.18^{\circ}C$, as means, respectively. The temperature of foods over time and placement of cold and frozen foods in transportation vehicles were not consistently maintained at optimal values in distribution. Therefore, the development of time-temperature history (TTH) system technology at the distribution level for cold and frozen foods is required.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.338-345
• /
• 1999

The objective of this study is to developed the refrigeration vehicle system installed eutectic olu-tion plates which consists of copper tubes carrying the refrigerant between two aluminum plates and the space between the plates filled with eutectic solution. The numerical analysis for the loca-tion of plates to get the uniform low temperature distribution in storage space was carried out and the result showed that the top left-side and right-side walls were the proper places to install plates. For three different concentrations of ethylene glycol solution the temperature distribution of inside space were measured during the day time of summer and the 21% solution was found to be properto sustain the temperature of $5-10^{\circ}C$ for milk transportation. The result showed that the refrigeration truck installed eutectic plates was very efficient to keep the milk fresh during vehicle transportation.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.77-82
• /
• 2020

In this paper, we developed a cooling system for the refrigeration truck using natural carbon dioxide refrigerant which is attracting attention as an environmentally-friendly refrigerant. We developed a high efficient environmentally-friendly refrigerated truck that converted the existing diesel vehicle into an LNG vehicle to improve emissions of truck and improved the efficiency of the cooling system by utilizing a heat of LNG vaporization. The COP of refrigerated truck system was increased 144%.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.21-22
• /
• 2014

대형 상용차량을 위한 냉난방장치는 이동 또는 정차 중에도 일정 온도를 유지 시켜야한다. 종전의 상용차량의 냉동시스템은 엔진과 연계하여 압축기를 구동하거나 엔진과 연계된 발전기의 전력을 이용하여 온도를 유지하였다. 이러한 방식은 제어가 용이하지 않고 효율성이 낮은 단점을 가지고 있다. 본 논문에서는 이러한 단점을 개선하고자 대형 상용차량이 정차중인 무시동 기간에도 일정 온도를 유지 할 수 있도록 직렬 L-C 공진을 이용한 2.5kW급 DC-DC 컨버터를 제안 하였다.

• Monthly Korean Chicken
• /
• v.4 no.2 s.32
• /
• pp.2-8
• /
• 1998

가축수송차량등에 대한 소독실시요령 고시 - 농림부, 원산지표시제도 개선 - 미 곡물수입 농무성보증으로 10억불 수입가능 - 신용보증기금의 ${\ulcorner}$부동산 담보부 보증${\lrcorner}$허용 건의 - 미산 옥수수 등 곡물수급 불안 우려 - 우크라이나, 닭고기 수입 증가 추세 - 비위생적인 닭고기 생산 단속 시급 - 일본, 닭고기수입 10년전에 비해 $70{\%}$증가 - 닭고기가격 안정위해 긴급수매냉동비축 실시 - 고환율시대에도 냉동수입 닭고기 경쟁력 있어 - 동검, 중국산 가금육에서 가금인플루엔자 검출 - 수급조절방안으로 초생추 랜더링 실시

• Journal of the Korean Institute of Gas
• /
• v.23 no.1
• /
• pp.19-26
• /
• 2019

In this study, we developed a cooling system for 1 ton size refrigeration vehicle using carbon dioxide natural refrigerant among hydrocarbon type refrigerant which is attracting attention as environment friendly refrigerant, and designed a heat exchanger and a unit cooler to raise COP. In addition, existing CNG 5 ton refrigerated trucks were converted into LNG vehicles to increase the efficiency of the cooling system and ensure safety against CNG. As a result, environmentally friendly refrigerated trucks using natural refrigerants of 1 ton and 5 ton sizes were developed.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.121-131
• /
• 2017

The Fuzzy-analytic hierarchy process (AHP) was adopted as the methodology for this study because it allows for the use qualitative judgments by experts. Based on results of the analysis of the success factors for frozen storage/cold storage warehouses, the facility factor was identified as the most important to consider. This factor had a weight of 0.307, followed by systems and operations, accessibility, and standardization/automation with weights of 0.263, 0.255, and 0.175, respectively. The conclusions and implications of the study are as follows. First, the efficiency of constant temperature and humidity systems and the heat insulation property of buildings need to be enhanced. Second, the efficiency of the operations should be enhanced through the standardization of equipment rather than by standardizing product loading. Finally, since logistics and transportation costs are higher for frozen storage/cold storage warehouses than for general distribution, accessibility needs to be considered as the first priority.