• Nuclear Engineering and Technology
• /
• v.3 no.3
• /
• pp.129-140
• /
• 1971

Two laboratory-melt heats of 3.25 silicon-iron were made and processed according to a normal commercial practice. Some of the important processing variables that were studied in relation to secondary recrystallization and texture development were contents of manganese and sulfur, heat-treatments after hot-rolling that were used to achieve different hot-rolled microstructures, and amounts of second cold-reduction. The main effort of the present study was directed toward elucidating the relationships among the amount of second cold-reduction, activation energies associated with secondary recrystallization and texture development. The specimens that had been cold-reduced 10% exhibited only grain growth by strain-induced grain boundary migration and did not exhibit secondary recrystallization. Secondary recrystallization did rot appear to completely occur in the 30% cold-reduced specimens, although the nucleation for secondary recrystallization was observed. The second cold-reduction in an amount of 50% was shown to be the optimun for secondary recrystallization and texture development by subsequent processing.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.17-24
• /
• 2000

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.163-166
• /
• 1999

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.137-142
• /
• 1997

Spot welding has been used in the sheet metal joining processes because of its high productivity and convenience. In this study effects of welding conditions on the fatigue life and predicting methods of fatigue life of spot welded joint have been studied. Fatigue life was estimated by stress index parameter considering multiaxial stresses. Fatigue tests were conducted with the tensile-shear specimens using SPCC. Fatigue life of spot welded joint was influenced by welding currents and was predicted exactly with taking into account Stage III.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.4
• /
• pp.103-107
• /
• 1989

The effects of annealing temperature on the magnetic properties (maximum permeability, coercive force and remanence) and mechanical properties (hardness, tensile strength and elongation at rupture) were analyzed using the nondestructive impulsive magnetic analyzer in a medium carbon cold rolled steel sheet. This nondestructive method was very useful for the analysis of magnetic and mechanical properties of materials. As it was known in the literature, the three distinct processes that indicate the recovery, recrystallization, and grain growth of a metal were measured with the non-destructive analyzer.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.44-54
• /
• 1994

Effects of cooling rate, cold reduction %, continuous annealing treatments on the recrystallization texture structure of the A1 killed extra low carbon steel sheet contaning Ti, Nb, and B were investigated. The texture coefficient ratio TC (222)/TC (200) tends to increase with decreasing the cooling rate of the coling process and increasing cold reduction %. However, the texture coefficient ratio tends to decrease as the cold reduction % increases from 80% to 90%, which may be due to the change of the primary texture structure from {554} (225) to {ill] (1 1%). The optimum fabrication procedures for the steel sheet with a maximum texture coefficient ratio may be : furnance cooling after the coiling treatment, 80% cold reduction and the continuous annealing treatment of holding at 80O0C for 1 min., water quenching and then holding at $450^{\circ}C$ for 5min.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.42-49
• /
• 2018

In steel industries, cold-rolled sheet manufacturing is one of the links between the front and rear important industries for national competitiveness and high value-added production. In particular, in small and medium-sized enterprises, one of the major problems is the carbonization phenomenon of the steel sheet during the annealing process. Carbonization occurring on the surface of the coil help reduce steel production. After conducting various experiments to identify the cause of carbonization on the surface of a cold-rolled steel, the following results were obtained: (1) An analysis of the rolling oil, which is used in the field, revealed it to contain approximately 40 ppm carbonized material. (2) A comparison of the thermal denaturation characteristics of the fresh rolling oil and using rolling oil by FT-IR analysis showed that thermal denaturation had occurred, as shown by the significant decrease in the relative intensity of the 2900 and $1750cm^{-1}$ peaks. (3) The thermal decomposition of the rolling oil took place for the rolling oil at approximately $220^{\circ}C$. Furthermore, annealing experiments at $200^{\circ}C$ showed that the carbonization phenomenon of the sample was not observed. On the other hand, carbonization was observed at temperatures higher than $240^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.305-305
• /
• 2012

빗각 증착은 입사 증기가 기판과 평행하게 입사하지 않고 기울여져 입사하는 코팅 방법으로 박막의 조직을 다양한 형태로 제어할 수 있다. 사전 연구결과에서 빗각으로 코팅된 알루미늄(Al) 박막의 경우 빗각으로 코팅되지 않은 Al 박막보다 반사율, 표면조도, 내식성이 향상되는 결과를 얻었다. 본 연구에서는 빗각 증착과 Al 박막의 Si 함유량이 반사율, 내열, 내식성에 미치는 영향을 비교 분석하였다. 마그네트론 스퍼터링으로 Al과 Al-Si 합금(Al-3 wt%Si, Al-10wt%Si)을 코팅하였다. 기판은 실리콘 웨이퍼와 염수분무시험을 위해 냉간압연강판을 사용하였으며 기판은 진공용기에 장착하기 전 알코올과 아세톤으로 초음파 세척 후 진공용기에서 글로우 방전을 이용하여 청정을 실시하였다. 기판 청정이 끝나면 기판을 $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$의 다양한 빗각으로 고정시켜 다층의 Al과 Al-Si 합금 박막을 코팅하였다. 박막의 조직을 관찰하기 위해 전자현미경을 사용하였으며 Al과 Al-Si 박막이 코팅된 냉간압연강판의 부식 특성을 평가하기 위해서 염수분무시험을 실시하였다. 박막의 치밀도 측정을 위해 Ferroxyl 시험을 실시하여 철과 Ferroxyl 용액이 반응하여 발생하는 파란 반점으로 기공도를 평가하였다. 박막의 내열성 평가를 위해서 대기 전기로를 이용하여 $450^{\circ}C$, $500^{\circ}C$에서 각각 4시간과 8시간 동안 열처리를 실시하여 시편 표면의 색상 변화를 분광광도계와 색차계로 관찰하였다. Al 박막의 Si 함량이 증가할수록 박막의 조직이 치밀해지고 내부식성이 향상되었다. Si이 10 wt% 함유된 박막은$500^{\circ}C$로 8시간 열처리한 후에도 열처리하지 않은 시편과 광택도 비교에서 변화가 크지 않았다. 빗각 $30^{\circ}$에서 코팅한 Si 함량 10 wt%인 박막이 우수한 반사율을 보였으며 염수분무시험에서 216시간이 경과한 후에 적청이 발생하여 우수한 내부식성을 보였다. 따라서 코팅층의 우수한 내부식성과 내열성, 높은 반사율은 다양한 산업분야에 적용이 가능한 우수한 표면처리 소재를 확보할 수 있을 것이라 판단된다.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.56-59
• /
• 2011

The demand for cold rolled steel (CR) for structural members is gradually increasing. If no surface treatment (coating for corrosion resistance) for CR is conducted, its use is very limited because CR is vulnerable to corrosion. Therefore, we need to develop a coating solution to provide high corrosion resistance for CR. In this study, an organic/inorganic coating solution with Si and Ti (Si polysilicate 7 wt.% + Urethane 13 wt.% + Ti amorphous 0.5 wt.%; LR-0727(1)) was used to evaluate the corrosion resistance of CR under a salt spray test. The specimens with the LR-0727(1) coating were heat treated in a drying oven at $120{\sim}210^{\circ}C$for 5 min. The corrosion resistance was investigated using a salt spray test of 7 h. In addition, an adhesive test was conducted. Rust showed under a heat treatment of $150^{\circ}C$, but no vestiges were found over $160^{\circ}C$. The specimens with heat treatment at $160^{\circ}C$ or more did not experience delamination. From these results, it is considered that the temperature limit for optimum heat treatment is $160^{\circ}C$ considering energy efficiency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.977-982
• /
• 2011

The horizontal force acting on a work roll was examined. This force results from the contact force between the work roll and backup roll in a backup-roll-drive 4-high cold-rolling mill. This horizontal force bends the work roll horizontally and therefore exerts reciprocal action on the roll-gap contour. An analytical model for predicting the horizontal force acting on a work roll, which generates a mean value in the steady state, was presented. The material used for the analysis was high-silicon steel (about 3% Si). A three-dimensional finite element (FE) model was also employed to investigate the non-steady-state behavior of the horizontal force. Results showed that the horizontal force varied with the off-center distance between the work roll and backup roll. In addition, the optimal off-center distance was determined to minimize the horizontal force.