• Korean Journal of Optics and Photonics
• /
• v.11 no.6
• /
• pp.379-384
• /
• 2000

We cooled cesium atoms below the Doppler cooling limit by laser cooling. For this deep cooling of atoms, the laser frequency was shifted by using the Zeeman shift of an absorption line of cesium. The stabilization of the laser frequency was maintained while the laser frequency was shifted by 40 MHz within 2 ms. The lowest temperature of the laser-cooled cesium atoms was $2.2\muK$\pm$0.5$\muK$in this experiment. We measured the temperature of the laser-cooled cesium atoms as a function of the frequency detuuing and the intensity of the cooling laser. The results agreed well with the ones calculated by two-photon laser cooling theory.theory.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.180-182
• /
• 2005

비냉각형 적외선 검출 회로 설계 시 공정상 변화에 의해 발생하는 센서의 저항값 변동이 크다. 본 논문에서는 이것을 해결하기 위해 차동적 입력 수신 구조를 이용한 방법을 제시하였다. 볼로미터 타입 비냉각형 적외선 영상 센서 회로는 입사된 적외선 에너지 양에 따라 센서의 저항값이 변하는 특성을 이용하며 그에 따른 전압 또는 전류의 변화를 측정하여 적외선의 파장을 알아내는 방식으로 검출회로 설계 시 가장 큰 문제점인 공정상의 변화 등으로 인한 신호검출 회로의 오동작을 개선하기 위하여 검출회로의 입력단을 차동적으로 받아들이도록 설계하였다.

• Food Science and Preservation
• /
• v.11 no.2
• /
• pp.263-268
• /
• 2004

Two field cooling tests were conducted to evaluate the cooling characteristic of paddy with a prototype grain cooler. The first test was carried out during summer season in a steel bin with 180.3ton of paddy at Sunchon. And the second test was carried out during harvesting season in a steel bin with 272.2ton of paddy at Ulsan. At the first test, initial paddy temperature of 23.6$^{\circ}C$ was dropped to 14$^{\circ}C$, and initial moisture content of 19.9% was dropped to 19.3% after 52.5 hours of cooling. At the second test, initial paddy temperature of 16.1$^{\circ}C$ dropped to 5.5$^{\circ}C$ after 78.0 hours of cooling. And, at the first test, the average air flow rates of chilled air leaving the grain cooler and penetrating the grain layer were 77.5 ㎥/min and 42.5 ㎥/min, respectively. To prevent leakage of chilled air from plenum chamber of steel bin, which was about 45% of the average air flow rates of chilled air leaving the grain cooler, a proper method was required. The average total power consumption at the first test during summer was 22.1 ㎾ with control of fan damper. At the second test, it was 17.4 ㎾ due to controlling the capacity of compressor with unloading solenoid valve and changing the flow rates of hot refrigerant gas flowing into evaporator and reheater from compressor, resulting in 27% reduction of energy consumption.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.113-121
• /
• 2016

Polymer electrolyte membrane fuel cell(PEMFC) requires cooling system to maintain the proper operating temperature(about $65^{\circ}C{\sim}75^{\circ}C$) because the efficiency and power are affected by operating temperature. In order to retain the operating temperature of PEMFC, cooling system and coolant control logic are needed. Hardware-in-the-loop simulation(HILS) is one of effective methods to study and evaluate control algorithm. In this paper, the HILS system was designed to study the coolant control algorithm. The models of HILS system consisted of PEMFC, heat exchanger, and external environment associated with temperature. The hardwares in HILS system are 3-way valves, pumps, and a heat exchanger. The priority control and the control target temperature were investigated to improve the control performance using HILS. The 3-way valve in $1^{st}$ cooling circuit was selected as priority control target. The under limit value of $2^{nd}$ 3-way valve set as a function of PEMFC power and $2^{nd}$ circuit coolant temperature to correct temperature control performance. As a result, the temperature of PEMFC is stably controlled.

• Journal of Korean Electronics
• /
• v.4 no.8
• /
• pp.81-85
• /
• 1984

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.50-55
• /
• 1991

Mg 원자선속의 냉각에 쓰일 diode laser의 특성과 이용가능성을 연구하였다. Mg 원자의 3P2-3D3 천이의 공명선 383.8nm를 얻기 위하여 Mitsubishi사의 ML형 laser diode를 택하여 주입전류와 온도를 변화시키고, 회절격자를 써서 767.6nm의 laser 광을 얻은 후 LiIO3 결정에 의해 383.8nm인 제2조화파를 생성하였다. Ring cavity 내에서 기본파가 공명할 때 증강계수는 15이었다.

• Journal of Biosystems Engineering
• /
• v.10 no.1
• /
• pp.39-47
• /
• 1985

먼 거리를 두고 산재(散在)된 소규모목장(小規模牧場)을 가지고 있으며, 현대화(現代化)된 우유처리공장(牛乳處理工場)과 저온저장시설이 충분(充分)하지 못한 아열대지방(亞熱帶地方)에 위치(位置)한 발전도상국(發展道上國)에서는 목장(牧場)에서 우유(牛乳)를 수집(收集)하여 처리공장(處理工場)까지 먼거리를 윤송하는 동안 많은 양(量)의 우유(牛乳)가 부패(腐敗) 손실(損失)되고 있다. 이를 막기 위(爲)하여 현지목장(現地牧場)의 강도높은 태양열(太陽熱)을 이용(利用)한 소규모우유저온처리기를 개발(開發)하여 현지목장(現地牧場)에서 직접 우유(牛乳)를 태양열(太陽熱)로 처리(處理)할 목적(目的)으로, 본(本) 연구(硏究) 제(第) I 보(報)에서는 태양열우유처리기(太陽熱牛乳處理機)의 모형제작(模型製作)을 위(爲)한 회로(回路)를 구성(構成)하고, 그 구성요소(構成要素)를 예찰(豫察)하였다. 제(第) II 보(報)에서는 제(第) I 보(報)의 연구결과(硏究結果)를 기초(基礎)로 태양열우유(太陽熱牛乳) 저온처리기의 모형(模型)을 실제(實際)로 제작(製作)하고 그 특성(特性)을 실험(實驗)을 통(通)하여 분석(分析)하므로서 태양열(太陽熱)을 이용(利用)한 우유처리기(牛乳處理機)의 개발가능성여부(開發可能性與否)를 확인(確認)하려 하였으며 그 결과(結果)는 다음과 같다. 1. 15~25초간(秒間)에 우유(牛乳)을 $78{\sim}80^{\circ}C$로 가열(加熱)하고 급속히 $4^{\circ}C$로 냉각(冷却)시켜야 하는 우유(牛乳)의 저온처리조건을 만족시킬 수 있었다. 2. 태양열우유처리기(太陽熱牛乳處理機)의 가열회로(加熱回路)를 위(爲)한 태양열집열기(太陽熱集熱器)는 시린더형(型) 집광식(集光式)이 적합하였고, 태양열(太陽熱) 냉각회로(冷覺回路)를 위(爲)한 태양열냉각제치(太陽熱冷覺製置)에 관(關)하여는 더 많은 연구(硏究)가 계속되어야 할 것으로 판단(判斷)되었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.17-19
• /
• 1990

• NEWSLETTER 전기공업
• /
• no.96-13 s.158
• /
• pp.26-55
• /
• 1996

• Proceedings of the Optical Society of Korea Conference
• /
• 1998.08a
• /
• pp.106-107
• /
• 1998