• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.241-247
• /
• 2001

Boundary line method was adopted to analyze the relationships between rice yield and meteorological conditions during rice growing period. Boundary lines of yield responses to mean temperature($T_a$) and sunshine hour( $S_{h}$) and diurnal temperature range($T_r$) were well-fitted to hyperbolic functions of f($T_a$) =$$\beta$_{0t}$(1-EXP(-$$\beta$_{1t}$ $\times$ ($T_a$) ) and f( $S_{h}$)=$$\beta$_{0t}$((1-EXP($$\beta$_{1t}$$\times$ $S_{h}$)), to quadratic function of f($T_r$) =$\beta$$_{0r}$(1-($T_r$ 1r)$^2$), respectively. to take into account to, the sterility caused by low temperature during reproductive stage, cooling degree days [$T_c$ =$\Sigma$(20-$T_a$] for 30 days before heading were calculated. Boundary lines of yield responses to $T_c$ were fitted well to exponential function of f($T_c$) )=$\beta$$_{0c}$exp(-$$\beta$_{1c}$$\times$$T_c$ ). Excluding the constants of $\beta$$_{0s}$ from the boundary line functions, formed are the relative function values in the range of 0 to 1. And these were used as yield indices of the meteorological elements which indicate the degree of influence on rice yield. Assuming that the meteorological elements act multiplicatively and independently from each other, meteorological yield index (MIY) was calculated by the geometric mean of indices for each meteorological elements. MIY in each growth period showed good linear relationship with rice yield. The MIY's during 31 to 45 days after transplanting(DAT) in vegetative stage, during 30 to 16 days before heading (DBH) in reproductive stage and during 20 days after heading (DAH) in ripening stage showed greater explainablity for yield variation in each growth stage. MIY for the whole growth period was calculated by the following three methods of geometric mean of the indices for vegetative stage (MIVG), reproductive stage (HIRG) and ripening stage (HIRS). MI $Y_{I}$ was calculated by the geometric mean of meteorological indices showing the highest determination coefficient n each growth stage of rice. That is, (equation omitted) was calculated by the geometric mean of all the MIY's for all the growth periods devided into 15 to 20 days intervals from transplanting to 40 DAH. MI $Y_{III}$ was calculated by the geometric mean of MIY's for 45 days of vegetative stage (MIV $G_{0-45}$ ), 30 days of reproductive stage (MIR $G_{30-0}$) and 40 days of ripening stage (MIR $S_{0-40}$). MI $Y_{I}$, MI $Y_{II}$ and MI $Y_{III}$ showed good linear relationships with grain yield, the coefficients of determination being 0.651, 0.670 and 0.613, respectively.and 0.613, respectively.

• Korean Journal of Animal Reproduction
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2002

The present study was carried out to investigate the effects of maturation media on penetrability of pig oocytes by liquid boar sperm coincubated with different sperm concentrations in a modified Tris­buffered medium (mTBM). Follicular oocytes collected from ovaries of prepubertal gilts were matured in a modified TCM-199 (mTCM-199) medium, modified Waymouth MB 752/1 (mWaymouth MB 752/1) medium or NCSU-23 medium. Oocytes (30~40) were transferred into each well of a Nunc 4-well multidish containing 0.5 $m\ell$ maturation medium. The sperm­ich portion of ejaculates with greater than 90% motile sperm were used in the experiment. The semen was cooled 22 to 24$^{\circ}C$ over 2 h period. The semen was diluted with Beltsville Thawing Solution (BTS) extender at room temperature to give 2$\times$10$^{8}$ sperm/$m\ell$ in 100 $m\ell$ plastic bottle. Liquid boar semen of 30 $m\ell$ in 100 $m\ell$ plastic bottle was kept at 17$^{\circ}C$ far 5 days. The sperm with greater than 70% motility after day 5 of storage were used for in-vitro fertilization (IVF). After 44 h maturation of immature oocytes in 5% $CO_2$in air at 38.5$^{\circ}C$, cumulus cells were removed and oocytes (30~40) were coincubated for 6 h in 0.5 $m\ell$ mTBM fertilization medium with five different (1$\times$10$^{6}$ , 2$\times$10$^{6}$ , 4$\times$10$^{6}$ , 6$\times$10$^{6}$, 10$\times$10$^{6}$ $m\ell$) sperm concentrations. At 6 h after IVF, oocytes were transferred into 0.5 $m\ell$ NCSU-23 culture medium fur further culture of 6 h. At 12 h after IVF, sperm penetration, polyspermy and male pronuclear formation of oocytes were evaluated. Oocytes of NCSU-23 maturation medium decreased polyspermy and increased male pronuclear formation compared to those of mTCM­199 and mWaymouth MB 752/1 maturation media. Of oocytes matured in NCSU-23 medium and inseminated in mTBM medium with 2~4$\times$10$^{6}$ $m\ell$ sperm concentrations, 50.8~50.9% showed sperm penetration, 13.3~19.5% polyspermy and 43.9~45.4% male pronuclear formation. In conclusion, we found out that oocytes matured in NCSU­23 medium and inseminated in mTBM medium showed superior in­vitro fertilization compared to those matured in mTCM­199 and mWaymouth MB 752/1 maturation media and inseminated in mTBM medium. The optimum sperm concentrations for in-vitro fertilization of oocytes matured in NCSU-23 medium by liquid boar semen stored at 17$^{\circ}C$ for 5 days were 2~4$\times$10$^{6}$ $m\ell$.

• Korean Journal of Animal Reproduction
• /
• v.26 no.1
• /
• pp.17-23
• /
• 2002

The present study was carried out to investigate the effects of the maturation media such as a modified TCM-199 (mTCM-199) medium, modified Waymouth MB 752/1 (mWaymouth MB 752/1) medium or NCSU-23 medium on penetrability of pig oocytes by liquid boar sperm. Oocytes (30~40) were transferred into each well of a Nunc 4-well multidish containing 0.5 $m\ell$ maturation medium. When immature pig oocytes were cultured in mTCM-199, mWaymouth MB 752/1 and NCSU-23 maturation media for 44 h in 5% $CO_2$, in air at 38.5$^{\circ}C$, the germinal vesicle breakdown (CVBD) rates of the oocytes were 95.6, 94.1 and 94.9%, respectively, and the maturation rates (metaphase II) of oocytes were 92.5, 90.1 and 91.1%, respectively. No differences were observed among the maturation media. The spermrich portion of ejaculates with greater than 90% motile sperm were used in the experiment. The semen was cooled 22 to 24$^{\circ}C$ over 2 h period. The semen was diluted with Beltsville Thawing Solution (BTS) extender at room temperature to give 2$\times$10$^{8}$ sperm/$m\ell$ in 100 $m\ell$ plastic bottle. Liquid boar semen of 30 $m\ell$ in 100 $m\ell$ plastic bottle was kept at 17$^{\circ}C$ for 5 days. The sperm with greater than 70% motility after day 5 of storage were used for in-vitro fertilization (IVF). After 44 h maturation of immature oocytes, cumulus cells were removed and oocytes (30~40) coincubated far 6 h in 0.5 $m\ell$ mTCM-199 and mTBM fertilization media with 2$\times$1061$m\ell$ sperm concentration. At 6 h after IVF, oocytes were transferred into 0.5 $m\ell$ mTCM-199 and NCSU-23 culture media for further culture 6 or 42 h. Sperm penetration, polyspermy and male pronuclear formation of oocytes at 12 h after IVF, and developmental ability of oocytes at 48 h after IVF were evaluated. The oocytes in combination with NCSU-23 medium for maturation and mTBM medium for IVF increased male pronuclear formation (48.0%) compared to those in combination with mTCM-199 media for maturation and IVF, and mWaymouth MB 752il medium for maturation and mTCM-199 medium far IVF. The rates of cleaved embryos (2~4 cell stage) at 48 h after IVF were 24.1% in combination with mTCM-199 media for maturation, IVF and culture, 43.6% in combination with mWaymouth MB 75211 medium fur maturation and mTCM-199 media for IVF and culture, and 71.2% in combination with NCSU-23 medium for maturation, mTBM medium for IVF and NCSU-23 medium for culture. In conclusion, we found out the oocytes matured in vitro were fertilized by liquid boar sperm stored in BTS extender at 17$^{\circ}C$ for 5 days. We recommend the simple defined NCSU-23 medium for nuclear maturation, mTBM medium and liquid boar sperm for IVF, and NCSU-23 medium for embryo culture.

• Journal of Food Hygiene and Safety
• /
• v.29 no.2
• /
• pp.79-84
• /
• 2014

This study has been performed for about 270 days at analyzing biologically hazardous factors in order to develop HACCP system for the non heat-frozen carrot juice. A process chart was prepared by manufacturing process of raw agricultural products of non heat-frozen carrot juice, which was contained water and packing material, storage, washing, cutting, extraction of the juice, internal packing, metal detection, external packing, storage and consignment (delivery). As a result of measuring Coliform group, Staphylococcus aureus, Salmonella spp., Bacillus cereus, Listeria Monocytogenes, Enterohemorrhagic E. coli before and after washing raw carrot, Standard plate count was $4.7{\times}10^4CFU/g$ before washing but it was $1.2{\times}10^2CFU/g$ detected after washing. As a result of testing airborne bacteria (Standard plate count, Coliform group, Yeast and Fungal) depending on each workplace, number of microorganism of in packaging room, shower room and juice extraction room was detected to be 10 CFU/Plate, 60 CFU/Plate, 20 CFU/Plate, respectively. As a result of testing palm condition of workers, as number of Standard plate count, Coliform group and Staphylococcus aureus was represented to be high as $6{\times}10^4CFU/cm^2$, $0CFU/cm^2$ and $0CFU/cm^2$, respectively, an education and training for individual sanitation control was considered to be required. As a result of inspecting surface pollution level of manufacturing facility and devices, Coliform group was not detected in all the specimen but Standard plate count was most dominantly detected in scouring kier, scouring kier tray, cooling tank, grinding extractor, storage tank and packaging machine-nozzle as $8.00{\times}10CFU/cm^2$, $3.0{\times}10CFU/cm^2$, $4.3{\times}10^2CFU/cm^2$, $7.5{\times}10^2CFU/cm^2$, $6.0{\times}10CFU/cm^2$, $8.5{\times}10^2CFU/cm^2$ respectively. As a result of analyzing above hazardous factors, processing process of ultraviolet ray sterilizing where pathogenic bacteria may be prevented, reduced or removed is required to be controlled by CCP-B (Biological) and critical level (critical control point) was set at flow speed is 4L/min. Therefore, it is considered that thorough HACCP control plan including control criteria (point) of seasoning fluid processing process, countermeasures in case of its deviation, its verification method, education/training and record control would be required.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.341-347
• /
• 1998

To develop simple and accurate analytical method for freezing time prediction of beef and tylose under various freezing conditions, freezing time (Y) was regressed against the reciprocal $(X_3)$ of difference of initial freezing point and freezing medium temperature, reciprocal $(X_4)$ of surface heat transfer coefficient, the initial temperature $(X_1)$ and thickness $(X_2)$ of samples which should cover most situations arising in frozen food industry. As results of the multiple regression analysis, equations were obtained as follows. $Y_{tylose}=3.45X_1+7642.84X_2+4642.67X_3+2946.89X_4-431.33\;(R^2=0.9568)$ and $Y_{beef}=0.68X_1+7568.98X_2+2430.78X_3+3293.26X_4-299.00\;(R^2=0.9897)$. These equations offered better results than Plank, Nagaoka and Pham's models, shown in satisfactory agreement with models of Cleland & Earle and Hung & Thompson when were compared to previous models, and the accuracy of its was very high as average absolute difference of about 10% in the difference between the fitted and experimental results. Also, thermal diffusivities of beef and tylose were measured as $4.43{\times}10^{-4}m^2/hr$ and $4.39{\times}10^{-4}m^2/hr$ at $6{\sim}7^{\circ}C$, $2.42{\times}10^{-3}m^2/hr$ and $3.32{\times}10^{-3}m^2/hr$ at $-10{\sim}-12^{\circ}C$. Initial freezing points of beef and tylose were $-1.2^{\circ}C\;and\;-0.6^{\circ}C$, respectively. Surface heat transfer coefficients were estimated $20.57\;W/m^2^{\circ}C$ with no-packing, $16.11\;W/m^2^{\circ}C$ with wrap packing and $13.07\;W/m^2^{\circ}C$ with Al-foil packing, and the cooling rate of immersion freezing method was about 10 times faster than that of air blast freezing method.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.7-12
• /
• 2018

This study was conducted to determine effects of precooling and storage methods on asparagus spears' quality such as changes of fresh weight and color during simulated export distribution. Two types of precooling methods, air cooling and hydrocooling, were applied prior to packaging by comparing with no precooling as a control. Asparagus spears were packed with oxygen transmission rate (OTR) film for modified atmosphere packaging (MAP) and perforated (PF) film for a conventional packaging. All treatments were stored at $8^{\circ}C$ for 20 hours, and subsequently at $4^{\circ}C$ by final storage day, which is simulated distribution temperature condition from Yanggu, Korea to Shimonoseki, Japan. The half cooling time was 12 minutes for air cooling and 15 seconds for the hydrocooling, indicating precooling process of asparagus spears faster with the hydrocooling. Rates of respiration and ethylene production were lowest with hydrocooling. Fresh weight loss was higher, approximately 11%, at the control condition in conventional storage, compared with the MAP, less than 0.5%. Carbon dioxide and oxygen content in the MAP was in the permissible ranges for asparagus spears under recommended CA/MA conditions under both the air cooling and hydrocooling. Ethylene content in the film package was lower with the precooling treatment. Firmness of stems was lowest with the hydrocooling prior to the MAP. Visual quality, off-odor, and hue angle value were best with hydrocooling prior to the MAP. In conclusion, the combination of hydrocooling with the MAP is effective in preserving quality during the export distribution process.

• Journal of Chest Surgery
• /
• v.38 no.1 s.246
• /
• pp.29-37
• /
• 2005

This study was prospectively designed to determine the physiologic effects of normothermic CPB and to compare its influences with hypothermic CPB. Material and Method: Thirty-six adult patients scheduled for el­ective cardiac surgery were randomly assigned to moderate hypothermic (hypothermic group nasopharyngeal tem­perature $26\~28^{\circ}C,\;n=18)$ ornormothermic (normothermic group, nasopharyngeal temperature > $35.5^{\circ}C\;n=18)$ CPB. Arterial blood samples were taken before CPB (Pre-CPB), 10 minutes after the start of CPB (CPB-10), and imme­diately after CPB stop (CPB-off) for determining total leukocyte counts, neuron-specific enolase (NSE), interleukin-6 (IL-6), endothelin-1 (ET-1), cortisol, troponin I (TNI), aspartate aminotransferase (AST), alanine aminotransferase (ALT), creatinine, blood urea nitrogen (BUN), and the pulmonary index $(Pi,\;PaO_{2}/FiO_{2}),$Other parameters such as urine output, mechanical ventilating period, ICU-staying period, postoperative complications and hospitalized days were also evaluated. Result: Total leukocyte counts, increased rate in NSE, in IL-6 and in cortisol at CPB-10 and CPB-off were significantly higher in normothermic group than in hyphothermic group. Urine output during CPB was lower in normothermic group than in hyphothermic group. The duration of mechanical ventilation, ICU-stay, and hospitalization were longer in normothermic group than in hyphothermic group. Conclusion: These findings sug­gested that normothermic CPB caused higher inflammatory and stress responses than hypothermic CPB during car­diac surgery using cold crystalloid cardioplegia. However, further studies with large number of cases should be carried out to validate this hypothesis.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.47-57
• /
• 2006

This study was carried out to select the Eco-tree for successful phytoremediation of abandoned metalliferous mines. We examined vegetation and heavy metal concentrations of woody plants in abandoned mining areas, and also conducted seed germination and seedling growth experiment on contaminated soils from Gahak and Geumjeong mines. Pinus densiflora, Robinia pseudoacacia, Lespedeza bicolor and Alnus japonica showed high frequency in the survey areas and had high heavy metal concentrations compared to other species. Heavy metal concentrations were higher in roots than in leaves and stems. The seed germination rate was in the order of P. densiflora, L. bicolor, R. pseudoacacia, and Alnus japonica from the incubactor and greenhouse experiment. In the incubator experiment germination rate was highest in the control soil for P. densiflora and A. japonica. Germination rate of P. densiflora was highest on the 100% contaminated soil for Gahak mine while germination rate decreased with increased percentage of contaminated soil for Geumjeong mine. In the greenhouse experiment germination rate was lowest on the 40% contaminated soil for Gahak mine while germination rate was lowest on the 20% contaminated soil for Geumjeong mine and increased with increased percentage of contaminated soil. Shoot growth was highest for L. bicolor while root growth was highest for R. pseudoacacia except for 20% contaminated soil in Geumjeong mine.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.351-361
• /
• 2007

The samples composed of a GST thin film and the protective layers of $ZnS-SiO_2$ or $Al_2O_3$ coated on c-Si substrate were prepared by using the magnetron sputtering method. Samples of three different structures were prepared, that is, i) the GST single film on c-Si substrate, ii) the GST film sandwiched by the protective $ZnS-SiO_2$ layers on c-Si substrate, and iii) the GST film sandwiched by $Al_2O_3$ protective layers on c-Si substrate. The ellipsometric constants in the temperature range from room temperature to $700^{\circ}C$ were obtained by using the in-situ ellipsometer equipped with a conventional heating chamber. The measured ellipsometric constants show strong variations versus temperature. The variation of ellipsometric constants at the temperature region higher than $300^{\circ}C$ shows different behaviors as the ambient medium is changed from in air to in vacuum or the protective layers are changed from $ZnS-SiO_2$ to $Al_2O_3$. Since the long heating time of 1-2 hours is believed to be the origin of the high temperature variation of ellipsometric constants upon the heating environment and the protective layers, a PRAM (Phase-Change Random Access Memory) recorder is introduced to reduce the heating time drastically. By using the PRAM recorder, the GST samples are heated up to $700^{\circ}C$ decomposed preventing its partial evaporation or chemical reactions with adjacent protective layers. The surface image obtained by SEM and the surface micro-roughness verified by AFM also confirmed that samples prepared by the PRAM recorder have smoother surface than the samples prepared by using the conventional heater.

• Clean Technology
• /
• v.19 no.3
• /
• pp.264-271
• /
• 2013

In this study, we optimized the removal condition of contaminants attached on the scrap surface to recycle the scrap generated from the Zr alloy tube manufacturing process back to the nuclear grade. The main contaminant is remnant of watersoluble cooling lubricant that is used in the pilgering manufacture during the tube production, and it is assumed to be compressed and carbonized on the surface of tube. Zirlo alloy tube of ${\phi}9.50mm$, which has high occurrence frequency of scrap, was selected as the object to be cleaned, and cleaning abilities of reagents were evaluated by measuring the characteristics of contaminants remained and by analyzing the surface of the tube after cleaning process. For evaluation of each cleaning agent, we selected two types of sodium hydroxide series and three types of potassium hydroxide series. Furthermore, to confirm dependence on tempe-rature and ultrasonic intensities, cleaning at the room temperature, $40^{\circ}C$, and $60^{\circ}C$ was conducted, and results showed that higher the cleaning temperature and higher the ultrasonic intensity, better the cleaning effect. As a result of the bare-eye inspection, while the use of sodium hydroxide provided satisfactory condition on the tube surface, the use of potassium hydroxide series provided satisfactory condition on the tube surface only when the ultrasonic intensity was over 120 W. In the cleaning effect analysis using the gravimetric method, cleaning efficiency of sodium hydroxide series was as high as 97.6% ($60^{\circ}C$, 120 W), but since the tube surface condition was poor after the use of potassium hydroxide, the gravimetric method was not appropriate. In the analytical result of surface contaminants on the tube surface, C, O, Ca, and Zr were detected, and mainly C and O dominated the proportion of contaminants. It was also found that the degree of cleaning on the tube affected the componential ratio of C and O; if the degree of cleaning is high, or if cleaning is well-conducted, the proportion of C is decreased, and the proportion of O is increased. Based on these results, optimal cleaning for application in the industry can be expected by categorizing cleaning process into three steps of Alkali cleaning, Rinsing, and Drying and by adjusting cleaning parameters in each step.