• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.237-245
• /
• 1998

Greenhouse crop production under critical summer climate In Korea has considerable difficulties because of high temperature and relative humidity. In this study, some water pipes were tested as a means of the dehumidification and increment of evaporative cooling efficiency. As a result of heat transfer characteristic analysis, overall heat transfer coefficient of copper pipe was larger than steel pipe, and estimated values were smaller than measured values. The condensed quantities of vapor were not significantly different between copper pipe and steel pipe, however dehumidifying effect by the water pipes was significantly large. It was estimated based on the results that the evaporative cooling system by the water pipe will be able to increase the evaporative cooling efficiency of about 48%, and decrease the temperature of about 1.3$^{\circ}C$.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.30-36
• /
• 2016

The battery pack which is a main component of E-scooter needs the cooling system because it is the matter of battery safety in spite of the incresing of charge efficiency due to decress the internal resistence in the condition of high temperature. The purpose of this study is to analyse the effects of cooling methods which is the control of air's inlet and outlet operating timing. When each battery had large temperature deviation in the battery pack, the difference of battery's performance and efficiency were appeared. In this study, the cooling performance of battery pack has been improved by changing the operation timing of inlet and outlet fan, it improved the performance and efficiency of battery. The numerical analysis using a commercial code ANSYS CFX version 17.0 were used for the study.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.2 no.1
• /
• pp.1-9
• /
• 1978

냉각용 Fin의 설계문제를 일반적인 최적설계문제로 바꾸어서 일반화된 Steepest Descent 방법에 의한 수치적 방법을 도입하여 해결하였다. 보다 실제적인 문제를 다룰 수 있도록 여러가지 제한조건을 고려한 Fin의 최적곡선 모양의 해를 얻었으며 이 방법의 유용성을 보였다. 사다리꼴의 Fin 설계예에서 위 방법을 이용한 해와 직접 계산에 의한 열전달량의 등고선 그림으로부터 구한 해와 일치함을 보였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.67-72
• /
• 2004

A regenerative cooling system has been designed through empirical 1-D analysis for a liquid rocket engine of 30-ton-level thrust. The hot-gas-side wall temperature from 1-D analysis shows 100K difference compared to 3D CFD analysis. Two variations of design with same cooling performance are suggested for different maximum channel widths i.e., 4mm and 2mm. The coolant pressure drop of the latter design is higher by 20%. The maximum liner temperature is about 700K when TBC and the thermal resistance of carbon deposit are considered. So film cooling is recommended to increase the cooling capacity as the present cooling capacity is insufficient

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.111-117
• /
• 2004

An analytical study was carried out to evaluate the regenerative cooling characteristics in the liquid rocket engine of a 10tf-thrust level using kerosene as a fuel. As a supplementary cooling method, a radiative cooling was applied to the nozzle extension. It was found out from this work that the cooling system with the regenerative and radiation cooling only is not adaptable for the liquid rocket engine of a 10tf-thrust level using kerosene as a fuel for the $2^{nd}$ stage of the space launch vehicle, with the viewpoint of the thermal and thermo-structural instability and the excessive pressure drop in the cooling channel.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.202-208
• /
• 2002

진공냉각장치의 효율적인 설계를 위하여 파일럿 규모의 진공냉각장치에서 진공압력에 따른 작물별 냉각특성과 운전조작에 따른 냉각특성을 구명하는 요인실험을 실시한 결과 가. 배추와 같이 조밀하게 결구되어 있는 작물은 프레시 포인트로부터 습구온도와 품온에 따라 진공압을 조절함으로서 표면과 심부의 온도편차를 줄일 수 있고 버섯, 상추와 같이 개체가 작은 작물은 진공압력에 따른 온도편차가 거의 나타나지 않았다. 나. 포장방법에 따른 냉각 특성에서는 무개공 및 개공율 5% 골판지상자, PE 상자, 6mm 통기공이 있는 필름 포장에서의 냉각속도는 유사한 경향을 나타냈으나 0.8mm의 통기공을 가지고있는 필름 포장에서는 냉각속도가 현저히 낮게 나타나 필름 포장을 했을 경우 최소 개공율의 구명이 필요한 것으로 나타났다. 다. 예냉전 농산물 표면에 가수를 했을 경우 배추와 같은 결구성 농산물은 감모율 저하에는 효과적이었으나 무가수에 비해 냉각균일도와 냉각속도가 낮게 나타났으며 버섯에서는 감모율 저하 및 냉각속도 향상에 효과가 있는 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.411-418
• /
• 1989

Quenching effect depends upon coolingability of quenchant as well as the composition of steel. Study on the coolingability of quenchants is important in cooling process and heat treatment of steel. Experimental apparatus and measuring method follow Korean Industrial Standard. Distilled water, different concentration of NaCl, NaOH and Na$_{2}$CO$_{3}$ solutions were compared. Also the effect of temperature of distilled water were calculated. Experimental results were examined with F.E.M. analysis.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.6
• /
• pp.64-68
• /
• 2008

막 냉각 연구를 위해 CFD를 이용할 때 적용 한계 및 그 타당성을 검증하고자 하였다. 이 글에서는 냉각공기공으로부터 분출된 냉각공기가 고온 고속으로 흐르는 주유동과 평판 사이에 벽면을 고온의 가스에 노출되는 것을 막기 위해 위치시킨 막냉각공기 흐름의 형태를 CFD를 이용하여 분석하였다. 모든 경계조건 및 격자계 그리고 검증 단계의 예까지 서술함으로써 이러한 CFD를 이용할 때 유용하게 적용될 방법들을 제공하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.489-494
• /
• 1997

주조 스테인레스강으로 제작된 원자로 냉각재배관은 고온에서 장기간 운전됨에 따라 열취화의 영향을 받을 수 있다. 장기간의 열취화는 재료의 연성 및 파괴인성을 저하시킬 수 있으며, 배관에 균열이 존재하는 경우 건전성을 위협할 수 있다. 따라서 본 논문에서는 원전수명연장을 위한 타당성 검토 측면에서 Chopra의 방법 등을 이용한 원자로 냉각재배관의 열취화 평가 및 민감도 분석을 수행하였다. 이를 통해 원자로 냉각재배관의 열취화 수준을 정량화하였고, 건전성 평가에 활용될 수 있는 J$_{IC}$ 값을 예측하였으며, 열취화에 영향을 미치는 주요 인자를 도출하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.854-861
• /
• 2008

Heat transfer characteristics of protruding electronic components in a horizontal channel are studied numerically. The system consists of two horizontal channels formed by two covers and one printed circuit board which has three uniform protruding heat source blocks. A two-dimensional numerical model has been developed to predict the conjugate heat transfer. and the finite volume method is used to solve the problem. Five different cooling methods are considered to examine the heat transfer characteristics of electronic components according to the different cooling methods. The velocity and temperature of cooling medium and the temperature of the heat source blocks are obtained. The results of the five different cooling methods are compared to find out the most efficient cooling method in a given geometry and heat sources.