• Nuclear Engineering and Technology
• /
• v.14 no.2
• /
• pp.78-85
• /
• 1982

The steady-state rotation of plasma centrifuge is theoretically analyzed to understand the physics of rotating plasmas and its feasibility for isotope separation. The centrifuge system under consideration consists of an annular gap between coaxial cylindrical anode and cathode in the presence of an externally-applied axial magnetic field. A problem for coupled partial differential equations describing centrifuge fields is formulated on the basis of the magnetohydrodynamic equations. Two-dimensional solutions are found analytically in the form of Fourier-Bessel series. The current density and velocity distributions are discussed in terms of the Hartmann number and the geometrical parameter of the system. At typical conditions, rotational speeds of the plasma up to the order of 10$^4$m/sec are achievable, and increase either with increasing Hartmann number, or with increasing ratio of the axial length to the inner radius of the cylinder. In view of much higher speeds of rotation which can be achieved in plasma centrifuge, it is expected that its efficiency is superior to mechanically driven gas centrifuges.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.33-38
• /
• 1998

The intracardiac axial flow pump has been developed This device has several advantages: it fits well anatomically, its blood-contacting surface is small, and it is implanted as easily as an artificial heart valve replacement. The axial flow pump consists of an impeller and a motor, both of which are encased in a housing. Two types of impeller with 4 vanes and 6 vanes are used. Sealing of the motor shaft is achieved by means of a ferrofluidic seal. A flow of 5$\ell$/min was obtained at a differential pressure of 100mmHg with a motor speed of 7091rpm with the 4-vane impeller and 6402rpm with the 6-vane impeller. Sealing was kept against a pressure of 150mmHg at 7000rpm with the 4-vane impeller and 6402rpm with the 6-vane impeller. Sealing was kept against a pressure of 150mmHg at 7000rpm over 24 hours. The index of hemolysis was 0.056 with the 4-vane impeller and 0.214 with the 6-vane impeller. The intracardiac axial flow pump is a very promising circulatory support.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1621-1632
• /
• 1993

A numerical simulation is carried out on flows in a rotating serpentine flow passage, which models a cooling passage in a gas turbine blade, by using a 3-D FVM based TURBO-D program. When it is rotating, the flow field exhibits quite different aspects due to the effect of the Coriolis force. Especially the secondary flow field appearing in the cross-sectional area is very complex because of the combined effect of the Coriolis force and the centrifugal force in the curved area. Local Nusselt numbers are also obtained based on the Reynolds analogy and compared with the published experimental data showing a good agreement. The results of the present study can be applied to the design of cooling passages of a gas turbine blade.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.1
• /
• pp.51-65
• /
• 2007

The purpose of this study is the development and application of a high resolution ultrasonic wave imaging system to detect discontinuity plane in lab-scale rock models. This technique is based on received time series which capture the multiple reflections at interface. This study includes the fundamental aspects of ultrasonic wave propagation in rock mass, the selection of the optimal ultrasonic wave transducer, data gathering, a signal processing, imaging methods, and experiments. Experiments are carried out by the horizontal movement and rotation devices. Experimental studies show the discontinuity is well detected by the horizontal movement and rotation devices under water. Furthermore, the discontinuity and the cavity on the plaster block are identified by the rotation device. This study suggests that the new method may be an economical and effective tool for the detection of the discontinuity on rock mass.

• Journal of Chest Surgery
• /
• v.38 no.12 s.257
• /
• pp.863-865
• /
• 2005

We experienced tracheobronchial stenosis caused by malrotation of the heart in a 3-year-old girl. Malrotation of the heart is induced by the decreased right lung volume, which was the result of right lung hypoplasia and herniation of the left thoracic cavity. We corrected the right lung volume and location of the heart to treat tracheobronchial stenosis.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.699-704
• /
• 2006

본 논문은 회전 및 천이불변 이미지 텍스처 검색의 새로운 방식을 소개한다. 주파수 영역의 극좌표계에서 동일한 공간 주파수에서 각도 방향으로 투영을 하는 각도 투영법을 제안하며, 제안된 각도 투영법을 이용하여 주파수 영역에서 푸리에 계수이 합과 표준편차를 특징벡터로 이용한다. 각도 투영법을 쉽게 구현하기 위해 극좌표계에서 라돈변환이 수행된다. 실험 시 MPEG-7 데이터를 이용하였으며 그 결과는 여러 텍스처 이미지를 검색하는데 있어서 특징을 잘 구별해 내는 결과를 보여준다. 또한 제안된 회전 및 천이불변 특징 추출 알고리듬은 등방성 텍스처나 국부적인 방향성을 보이는 텍스처 영상 검색에도 효율적인 검색률을 보인다.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.169-172
• /
• 2001

본 논문은 얼굴의 특징점 추적을 위하여 얼굴 회전 변환과의 크기 변환을 고려한 BMA(Block matching alogorithm)을 이용한 방법을 제안한다. 우선 얼굴의 크기 변화를 구하기 위하여 얼굴 영역을 분리하여 그 면적을 구한다. 이 면적을 이전 프레임에서 구한 얼굴 영역의 면적과 비교하여 크기 비례를 계산한다. 다음으로 각 특징점을 중심으로 하는 8방위 영역의 화소들로 집합을 설정한다. 집합을 설정할 때에는 얼굴의 크기 변화를 고려하여 영역 내 화소들을 포함하는 양을 수정한다. 그리고 새로운 영상에서 화소 집합간의 거리가 가장 작은 화소를 새로운 특징점으로 지정한다. 이 때, 회전 변화를 고려하여 화소 집합의 순서를 순차적으로 바꿔 집합 간 거리를 산출한다. 제안하는 방법은 회전과 크기 변환에 강인한 특성을 보일 뿐 아니라, 단순한 움직임 예측 방법인 BMA보다도 쉽고 빠르게 계산된다.

• The KSFM Journal of Fluid Machinery
• /
• v.2 no.4 s.5
• /
• pp.16-23
• /
• 1999

The characteristic of unsteady flowfields on gas turbine, particularly on a rotor blade surface has been numerically investigated. The unsteady flow in a rotor blade passage as a result of wake/blade interaction is modeled by the inviscid flow approach, and solved by Euler equations using a time accurate marching scheme. Unsteady flow in the blade passage is induced by periodically moving a wake model across the passage inlet. The wake model used in this study is the Gaussian wate model in which the wake flow is assumed to be parallel with uniform static pressure and uniform relative total enthalpy. Numerical results show that for the case of Ps/Pr=1.5, the velocity and pressure distribution on the blade surfaces have much more complex profiles than for the case of Ps/Pr=1.0.

• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.233-239
• /
• 1998

The effects of unsteady flow on gas turbine, particularly on a rotor blade surface are numerically investigated. The unsteady flow in a rotor blade passage as a result of wake/blade interaction is modeled by the inviscid flow approach, and solved by the Euler equations using a time accurate marching scheme, Numerical results show that for the case of $P_s/ P_r= 1.5$, the velocity and pressure distribution on the blade surfaces have much more complex profiles than those of $P_s/ P_r= 1.0$.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.215-219
• /
• 2002

In this study, we show the numerical and the experimental results for fluid motions inside a rectangular container subjected to a background rotation added by a rotational oscillation. In the numerical computation, we used a parallel computer system of PC-cluster type. Attention is given to dependence of the flow patterns on the parameter change. It shows that the flow becomes in a periodic state at low Reynolds numbers and undergoes a transition to a chaotic motion at high Reynolds numbers. It also shows that the fluid motion tends to be depth-independent at ${\epsilon}$ up to 0.3 for Re lower than 5235.