• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.419-429
• /
• 2024

Purpose: To enhance the non-combustibility of fire protection piping insulation and improve the heat resistance of smoke extraction duct insulation, I plan to verify the suitability of AES insulation materials for these applications through performance testing. Method: The non-combustibility, heat resistance, and thermal insulation performance of AES insulation materials will be verified through various tests. Result: According to the 'Standards for Flame Retardancy and Fire Spread Prevention of Building Finishing Materials,' the results of non-combustibility and gas toxicity tests confirmed the non-combustible properties. The standard fire resistance tests verified the fire resistance performance. Additionally, the thermal insulation performance was confirmed through building insulation tests. Conclusion: As the performance tests on AES inorganic insulation materials have proven their noncombustibility, fire resistance, and thermal insulation performance, these materials are considered a viable alternative for improving fire spread prevention in buildings.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.5
• /
• pp.51-58
• /
• 2014

This paper presents a fire exposure test result to evaluate fire resistance capacity of retrofit method using FRP (Fiber Reinforced Polymer) in reinforcement concrete structure. Especially, this paper focused on near-surface-mounted retrofit method; FRP is mounted into the groove after making a groove in concrete. In the test, main parameters are retrofit method and materials for fire proofing. Spray type of perlite and board type of calcium silicate were considered as external fire proof on surface while particle of calcium silicate and polymer mortar as internal one in groove. By increasing the temperature of inside heating furnace, the transfer of temperature from surface of fire proofing material to groove in specimen was measured. As a result, fire proofing using the board of calcium silicate was more effective to delay the heat transfer from outside than spraying with perlite. It was found that the fire proofing could resist outside temperature of $820^{\circ}C$ at maximum to keep the temperature of epoxy below glass transit temperature (GTT).

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.1
• /
• pp.3-10
• /
• 2019

The purpose of this paper is to find the fire-protection method for keeping on the bond capacity of Near-Surface-Mounted (NSM) FRP under high temperature. Experiments have been carried out to evaluate the bond capacity of NSM FRP by using CFRP-plates and to confirm the heat transfer to the concrete block when the refractory insulation is attached to the surface of NSM FRP. Bond test of NSM FRP under room temperature was conducted to obtain the maximum bond strength. And then a heating tests were carried out with keeping the bond stress of 30% of the maximum bond strength. As a result, the bond capacity of NSM FRP was disappeared when the temperature at epoxy reached to its glass transition temperature (GTT). In order to secure the bond capacity of the NSM FRP, it is necessary to protect the front as well as side by using insulation materials.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.58-63
• /
• 2014

Fire-resistance paints are supposed to become intumescent and diminish heat transfer along the steel frames in case of a fire. If unsatisfactory fire-resistance paints which do not satisfy their standard specification are used, it may result in a severe disaster. Because satisfactory fire-resistance paints are hardly discriminated from the unsatisfactory ones by a simple visual inspection, more reliable and convenient onsite evaluation methods are necessary. Here we report the preliminary study result on the fire safety testing method for fire-resistance paints using an X-ray analysis method. It was found that the existence and quantity of effective constituents in fire-resistance paints can be detected by the X-ray analysis method. X-ray fluorescence (XRF) analyses showed that P and Cl elements are much more enriched in fire-resistance paints, compared to normal paints. X-ray diffraction (XRD) analyses showed that ammonium polyphosphate is present as the main crystalline material in fire-resistance paints, but absent in normal paints. The X-ray analysis method is expected to be used for the onsite inspection of fire-resistance paints with the upcoming availability of portable XRF and XRD instruments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.149.2-149.2
• /
• 2013

친 환경적 소재인 ETFE (Ethylene Tetra Fluoro Ethylene)는 내화학성과 단열성을 가지며 탁월한 빛투과성, 자정효과 및 초경량 소재의 특성을 가진 열가소성 불소수지로서 서울시 신청사, Water Cube라고 많이 알려진 베이징 올림픽 수영 경기장 같은 대형 건축물의 외벽에 사용될 만큼 최근 세계 각국의 건축가들에게 각광을 받고 있다. 본 실험에서는 영구자석을 이용한 고밀도 플라즈마로 높은 점착성과, 균일한 박막 및 대면적 공정이 가능한 RF-magnetron sputtering방법으로 기판인 Slide glass위에 ETFE를 증착하여 접촉각의 변화와 구조적 및 광학적 특성에 대하여 측정하였다. 접촉각 측정결과 35w에서 $15^{\circ}$ 이하의 친수 특성을 나타내었고, 자외선 파장에서의 투과율 측정 결과 87% 이상의 높은 투과율을 나타내었다. AFM (Atomic Force Microscope) 측정결과 35 W에서 1.6 nm의 RMS (Root mean square)값이 측정 되었다. ETFE 특성은 비가 오면 자동으로 이물질이 씻겨 내려 주기적으로 청소를 해줘야하는 유리보다 유지관리비가 적게 될 것으로 사료되고, 높은 자외선 투과율을 보임으로 온실에서 균형 잡힌 식물 성장을 위한 화학약품의 소모를 줄여 줄 것으로 사료된다.