• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.227-227
• /
• 2003

캐패시터, 인덕터 등의 전자부품들은 적층기술 및 표면 실장 기술 등을 이용하여 적층형 칩형태로 제작되고 있다. 적층형 칩형태의 전자부품들은 전자기적 특성을 부여하는 세라믹스와 전극역할을 하는 금속으로 구성되어 있으며, 전극 부분은 크게 내부전극과 외부전극으로 구분된다. 고장이 발생하게 되면 고장의 형태를 의미하는 고장모드(failure mode)와 제품을 고장에 이르게하는 물리, 화학적, 기계적 과정을 의미하는 고장기구(failure mechanism)을 조사하게 된다. 전자부품에서 고장이 발생하였을 경우, 1차적인 분석대상은 전극재인데 전극재에 기인한 고장으로는 세라믹스와 전극재 사이의 열팽창계수 차이에 기인한 박리현상(Delamination), 인쇄불량에 의한 단락 및 두께 불량, 세라믹스와 전극재 사이의 반응, 산화에 의한 부식 등이 있다. 이러한 고장은 급격한 주위 환경의 변화에 의한 것보다는 일정수준의 스트레스가 축적되어 발생하며, 수명을 예측하기 위해서는 고장의 원인을 규명하고 그 원인에 의한 가속 시험을 수행하는 것이 일반적인 방법이다. 본 연구에서는 Ag 외부 전극재의 수명을 예측하고자 가속시험을 수행하였고, 고장 분석 통하여 Ag외부 전극재의 특성 및 문제점 등을 정확히 파악하기 위한 연구를 하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.282-283
• /
• 2012

국제표준규격(ISO 12215-5) 및 국내 플레저보트 검사지침의 개정에 따라 길이 6미터 미만의 플레저보트의 낙하시험에 의한 강도시험기준을 적용 가능하게 되었다. 하지만 현재 낙하시험은 자유낙하 시 내력 및 외력에 의한 선체 내부의 찌그러짐, 크랙, 박리, 파손 등을 육안으로 검사하는 방법으로 시험결과의 정량적인 판단이 이루어지지 않고 있다. 따라서 본 연구에서는 레저선박의 낙하시험을 위한 시스템 및 운용프로그램을 개발하여 플레저보트의 구조안전성의 정량적 평가가 가능한 시스템을 개발하고 다단 롤포밍 기법을 적용한 5m급 알루미늄레저보트에 적용하여 시스템의 성능을 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.6
• /
• pp.721-727
• /
• 2003

Freezing of turbulent water flow between two horizontal cooled parallel plates with the separated region has been investigated experimentally. The flow separation was induced by vertical plates (two-dimensional plates) situated at the inlet of the rectangular channel. The degree of flow separation was varied by employing vertical thin plates with various heights. Three kinds of the vertical plates with 8.0, 9.8 and 12.5 mm in height were utilized. The Reynolds number and cooling temperature ratio were ranged from $3.45\times10^3 to 1.73\times10^4$ and 7.0 to 20.0 respectively, The measurements show that the flow separation influenced remarkably on the local ice formation characteristics. The location of the first ice layer and the average heat transfer at the ice surface were found be correlated as a function of the Reynolds number, the cooling temperature ratio, and the orifice height ratio.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.59-65
• /
• 1999

This study is to analyze turbulent flow over a backward-facing step in a rectangular duct. The side wall effects on the internal flow were determined by varying the aspect ratio(defined as the step span-to-height ratio) from 1 to 20. In the flow behind a backward-facing step, separation, recirculation and redeveloping is occurred frequently. These phenomena appear in a particular variation by varying the aspect ratio. The results show that the aspect ratio has an influence on the velocity and reattachment length. When the AR is increased, the reattachment length is increased. For 6 over aspect ration, the rate of increase is decreased. The length of recirculation in the upper corner is increased, as the increase of aspect ration. It's width is not changed in the variation of aspect ration. The transverse, streamwise and spanwise velocities were decreased along the flow down stream of the step.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.8
• /
• pp.1034-1045
• /
• 1997

For the improvement of the pump characteristics in the partial capacity range, it must be verified that the influence of the impeller design factor on the internal flows and the influence of the impeller internal flows on the pump characteristics. In this paper, in order to understand the influence of inlet angles on flow conditions and characteristics of a mixed flow pump, experiments were carried out for three kinds of impeller, which have the same outlet angle distributions and meridional section shapes. Results show that separation and stall in the partial capacity range can be controlled by the inlet angles. The relationship between the separation - stall at the impeller leading edge and the discharge flow conditions is clarified.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.171-172
• /
• 2009

TSV(through via silicon)를 이용한 Via의 Cu 충전에서 Seed 층의 역할은 전류의 흐름을 가능하게 하는 중요한 역할을 하고 있다. Via에 각각 Ti/Au, Ti/Cu를 증착한 후 Ti/Cu가 Ti/Au를 대체 할 수 있는지를 알아보기 위해 먼저 실리콘 웨이퍼에 via를 형성하고, 형성된 via에 기능성 박막층으로 절연층(SiO2) 및 시드층을 형성하였다. 전해도금을 이용하여 Cu를 충전한 결과 Ti/Au 및 Ti/Cu를 증착한 두 시편 모두 via와 seed층 접합면에 박리 등의 결함이 없었고, via 내부 또한 void나 seam 등이 관찰되지 않고 우수하게 충전된 것을 확인할 수 있었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.1-9
• /
• 2013

Variable area nozzle, where both throat and exit area vary, is required for optimal expansion and optimal nozzle shape upon operation of after-burner. Steady-state and transient analyses are carried out for each condition with and without afterburner operation and as a function of the location of the nozzle flap. Effects of that nozzle displacement on flow and thrust characteristics are analyzed from numerical results. With variable area nozzle adopted, the combustion field is variable in time, leading to periodically variable thrust. For off-design conditions, flow separation shows up due to over expansion at the flap tips and shock wave does in the nozzle due to under expansion. The undesirable phenomena can be solved by control of variable area nozzle.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.251-259
• /
• 1999

Recently, large scale concrete structures exposed to severe environments are increasingly built in various locations, The corrosion may severely affect the durability and service life of such a concrete structure. It is, therefore, necessary to develop a method to enhance the corrosion resistance of a concrete, The purpose of this paper is, therefore, to investigate the corrosion resistance and bond strength characteristics of anti-corrosive cement coated reinforcements. To this end, a comprehensive experimental study has been done to explore the corrosion and bond behavior of those coated reinforcements. The test results indicate that the anti-corrosive cement coated reinforcements do not exhibit any corrosion after corrosion tests and the bond strengths are very good as much as plain bar. It is seen that the anti-corrosive cement coated reinforcements can be efficiently used to enhance the durability of reinforced concrete structures.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.531-538
• /
• 2013

The primary function of centrifugal compressor volute is to flow from the impeller and diffuser to the pipe system. The strength of the scroll vortex and flow pattern in the volute vary with the operating point. This is largely caused by the interaction between the impeller and the volute flow fields. The recirculation flow around the tongue and the scroll vortex can be used to understand the characteristics of the volute flow at off-design points. The present study aims to find the characteristics of a flow pattern in the diffuser and volute of a centrifugal compressor from the rectangular cross section of the volute. Measurements are carried out using PIV. The results obtained in this study show that the separation region around the tongue is reduced and that the recirculation flow increases as the flow coefficient decreases.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2017

Numerical computations are performed to investigate the effect of pintle stroke on the performance of an internal pintle thruster. Results show that the thrust control ratio was less than 2% and the aerodynamic load ratio was 22% as the pintle stroke increased. The flow past the nozzle throat rapidly expanding because of the shape of the pintle, and a shock wave was generated. Particularly, at the pintle stroke distance of 4 and 5 mm, the shock wave hit the wall of the nozzle, results in peeling bubbles. Depending on the altitude, the thrust increased and the aerodynamic load decreased, but the difference was as small as 1.5%. In the presence of the bore, the reduction of the pintle tip area resulted in a decrease in aerodynamic load.