• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 한국생물환경조절학회 1998년도 정기총회 및 학술논문 발표요지
• /
• pp.153-157
• /
• 1998

무등산 수박의 유묘 생산에 있어 적정 배양액 농도를 구명하기 위하여 일본원시균형배양액을 기준으로 하여 NO$_3$-N, K 및 Ca의 농도별 첨가량에 따른 유묘생장반응을 조사하였다. 1. 배양액내 질소농도을 증가시킬수록 초장, 엽면적, 엽수, 엽장, 엽폭이 증가하였으며 생체중과 건물중도 증가하였다. 2. 배양액내 칼륨의 농도를 증가시켰을 경우 수박 유묘의 초장은 200ppm까지는 약간 증가하지만 엽면적, 엽수, 엽장, 생체중 및 건물중은 200ppm이상으로 증가시키면 감소하는 경향이었다. 3. 칼슘처리의 경우 농도의 증가가 생장의 증가를 나타내지는 않았으며 원시균형 배양액의 표준이라 할 수 있는 80ppm처리구의 생장이 양호한 것으로 나타났다. 4. 배양액(일본원시균형배양액 1/2농도)에 N의 농도를 200ppm으로 증가시킬 경우 수박유묘의 엽병내 N, K 및 Mg의 함량이 증가하였지만 P 및 Ca의 증가나 감소의 경향은 보이지 않았다. 5. K의 농도를 100ppm으로 증가시킬 경우 수박유묘의 엽병내 N, K 및 Mg의 함량이 증가하였지만 P 및 Ca의 증가나 감소의 경향은 보이지 않았다. 5. K의 농도를 150ppm으로 증가시킬 경우 수박유묘의 엽병내 N, K 및 Mg의 함량이 증가하였지만 P 및 Ca의 증가나 감소의 경향은 보이지 않았다. 그러나 200ppm이상으로 증가시킬 경우 N과 Mg의 감소가 나타났다. 6. 양액내 Ca의 농도를 증가시킬수록 엽병내 N, K Ca 및 Mg의 농도가 증가하는 반면 P의 경우 거의 변화가 없었으며,N의 경우는 200ppm 이상의 농도에서 감소하는 경향을 나타내었다. Mg의 경우는 150ppm까지는 함량의 변화가 없었지만 200ppm 이상의 처리구에서 급격한 함량증가를 나타내었다.~21.2ml가 흘러나와 배지의 공극이 일정하지 않아 시간당 통과하는 양이 일정하지 않았다고 생각되었다. $\bigcirc$ 펄라이트 : 합섬A(비스코스+레이온)급액천의 유입은 소(1$\times$60cm)에서 21.8ml, 중(2$\times$60cm) 33.5ml, 대(3$\times$60cm) 43.4ml가 통과되었고 합섬(폴리에스텔)에서는 19.0~30.7ml로서 급액천의 규격에 따라 통과되는 차이가 있었다. 배지가 규격화되어 있어 급액천의 규격별로 일정하게 유입되었으며 급액천의 재질이 유입에 영향을 미친 것으로 사료되었다. (2) 급액관과 베드상과의 높이에 따른 유출양 : 급액과 베드상과의 낙차가 클수록 유출이 증가함을 알수 있었으나 합섬C(인견)실험구에서는 낙차가 유출에 영향을 미치지 않았다. (4) 급액된 양액의 EC 및 pH조사 : 급액된 양액의 EC 및 pH에 전혀 변화가 없어 재배 적응에 문제가 없을것으로 사료되었다.이가 가장 이상적인 것으로 생각된다.세포수에 대한 내부세포괴세포(ICM/total cells)가 20~40% 범주에 드는 비율은 처리구가 대조구보다 낮은 결과를 나타냈다. 결론적으로 돼지난포란을 이용하여 체외성숙을 유기할 때 효과적인 cysteamine의 농도는 50$\mu$M이 적당하며, 초기배발달을 유기할 때의 효과적인 cysteamine의 농도는 25~50$\mu$M인 것으로 판단된다.N)A(N)/N을 제시하였다(A(N)=N에 대한 A값). 위의 실험식을 사용하여 헝가리산 Zempleni 시료(15%$S_{XRD}$)의 기본입자분포로부터 %$S_{XRD}$를 계산한

• Tunnel and Underground Space
• /
• 제19권2호
• /
• pp.146-157
• /
• 2009

An experimental study of accelerated weathering on mudstone sample specimens from Haman, Gyeongnam was performed to investigate the variations of physico-mechanical properties of deteriorated rocks due to freeze-thaw weathering. Each complete cycle of freeze and thaw lasted 24 hours, comprising 2 hours of saturating in vacuum chamber, 8 hours of freezing at $-16{\pm}1^{\circ}C$ and 14 hours of thawing at room temperature. Total of 55 cycles of freeze-thaw were completed with measuring the index properties as well as geometries of microfractures. The measured specific gravity and P-wave velocity found to decrease with increasing freeze-thaw cycles. On the other hand, absorption ratio and effective porosity were continuously increased with increasing freeze-thaw cycles. It was found that the index properties of deteriorated sample specimen depend on its initial properties and flaws in rock. The size and density of the traces of the microfracture on slab specimen exhibited abrupt changes after 30 cycles of freeze-thaw weathering. The results obtained in this study show that the box fractal dimension($D_B$) given in this paper has the strong capability of quantifying the size and density of the microfracture.

• The Journal of Engineering Geology
• /
• 제23권3호
• /
• pp.247-256
• /
• 2013

The carbonate sands of the Sabkha layer in the Middle East have very low shear strength. Therefore, instant settlement and time-dependent secondary settlement occur when inner voids are exposed, as in the case of particle crushing. We analyzed settlement of the Sabkha layer under a large-scale foundation by hydrotesting, and compared the field test results with the results of laboratory tests. With ongoing particle crushing, we observed the following stress-strain behaviors: strain-hardening (Sabkha GL-1.5 m), strain-perfect (Sabkha GL-7.0 m), and strain-softening (Sabkha GL-7.5 m). General shear failure occurred most frequently in dense sand and firm ground. Although the stress-strain behavior of Sabkha layer carbonate sand that of strain-softening, the particle crushing strength was low compared with the strain-hardening and strain-perfect behaviors. The stress-strain behaviors differ between carbonate sand and quartz sand. If the relative density of quartz sand is increased, the shear strength is also increased. Continuous secondary compression settlement occurred during the hydrotests, after the dissipation of porewater pressure. Particle crushing strength is relatively low in the Sabkha layer and its stress-strain behavior is strain-softening or strain-perfect. The particle crushing effect is dominant factor affecting foundation settlement in the Sabkha layer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제35권8호
• /
• pp.1038-1044
• /
• 2006

The effects of the addition of soybeans cultured by mycelia of Pleurotus eryngii (SMP) on the characteristics of tofu were studied. Protein and ash contents of SMP were higher than those of untreated soybeans: 43.23 and 6.34% for treated soybeans, respectively, and 40.42 and 5.90% for untreated soybeans. But lipid and carbohydrate contents of SMP were lower. For minor elements, Mg and Ca contents of SMP were higher and P was lower than control. Tofu could be manufactured when SMP was added below 25% to the untreated soybean. In scanning electron microscopic observation, tofu tended to break down as the ratio of SMP was over 25% to the untreated soybean. The addition of SMP $(5{\sim}15%)$ increased the yield of tofu to $1.5{\sim}3.5%$. In textural characteristics, hardness of tofu increased as the ratio of SMP increased up to 20%. Cohesiveness, chewiness, springiness and gumminess were high in tofu which was made with $5{\sim}15%$ SMP. Savory taste and overall acceptability of the tofu prepared with $5{\sim}15%$ SMP were higher than those of control when evaluated by sensory test.

• Geophysics and Geophysical Exploration
• /
• 제10권2호
• /
• pp.138-146
• /
• 2007

This paper describes 2.5D induced polarization (IP) modeling and inversion algorithms using complex resistivity. The complex resistivity method has merits for acquiring more valuable information about hydraulic parameters and pore fluid than the conventional IP methods. The IP modeling and inversion algorithms are developed by allowing complex arithmetic in existing DC modeling and inversion algorithms. The IP modeling and inversion algorithms use a 2.5D DC finite-element algorithm and a damped least-squares method with smoothness constraints, respectively. The accuracy of the IP modeling algorithm is verified by comparing its responses of two synthetic models with two different approaches: linear filtering for a three-layer model and an integral equation method for a 3D model. Results from these methods are well matched to each other. The inversion algorithm is validated by a synthetic example which has two anomalous bodies, one is more conductive but non-polarizable than the background, and the other is polarizable but has the same resistivity as the background. From the inverted section, we can cleary identify each anomalous body with different locations. Furthermore, in order to verify its efficiency to the real filed example, we apply the inversion algorithm to another three-layer model which includes phase anomaly in the second layer.

• Korean Chemical Engineering Research
• /
• 제45권3호
• /
• pp.242-248
• /
• 2007

For an optimal design of automotive electric system, it is important to have a reliable modeling tool to predict the charge-discharge behaviors of the automotive battery. In this work, a two-dimensional modeling was carried out to predict the charge-discharge behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experimental data of the charge-discharge behaviors of a lead-acid battery. The discharge behaviors were measured with three different discharge rates of C/5, C/10, and C/20 at operating temperature of $25^{\circ}C$. The batteries were charged with constant current of 30A until the charging voltage reached to a predetermined value of 14.24 V and then the charging voltage was kept constant. The discharge and charge curves from the measurements and modeling were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, the porosity of the electrodes, and the current density within the electrodes as well as the acid concentration can be predicted as a function of charge and discharge time.

• The Journal of Engineering Geology
• /
• 제24권1호
• /
• pp.23-38
• /
• 2014

The composition of carbonate sands from a sabkha at Ruwais in the UAE differs from that of silica sand, and these sands are crushed easily under low compression pressures. Accordingly, particle crushing of carbonate sand occurs under high pressure, which results in additional settlement and reduces the shear strength. In this study, consolidation and triaxial tests were conducted to analyze the characteristics of carbonate sands following particle crushing. The unusual shear strength graphs of the carbonate sands result from the degree of particle pre-crushing. For the range at p' > p in the p (p')-q diagram, negative (-) excess porewater pressures occur if the axial pressure causes particle crushing that induces exposure of the inner voids. In addition, the q value decreased after particle crushing. In conclusion, the unusual characteristics of the carbonate sands were induced by particle crushing. The triaxial tests revealed that the degree of particle pre-crushing influenced the excess porewater pressure.

• Korean Journal of Soil Science and Fertilizer
• /
• 제38권5호
• /
• pp.287-293
• /
• 2005

In this work, to develop soil inoculant which maintains stable viable cells and normalized quality, studies on micro-encapsulation with bacteria and yeast cells were performed by investigating materials and methods for micro-encapsulation as well as variation and stability of encapsulated cells. Preparation of capsule was conducted by application of extrusion system using micro-nozzle and peristaltic pump. K-carragenan and Na-alginate were selected as best carrier for gelation among K-carageenan, Na-alginate, locust bean gum, cellulose acetate phthalate (CAP), chitosan and gelatin tested. Comparing the gels prepared with Bacillus sp. KSIA-9 and carriers of 1.5% concentration, although viable cell of K-carragenan and Na-alginate was six times higher than those of other, Na-alginate was finally selected as carrier for gelation because it is seven times cheaper than K-carragenan. The gel of 1.5% Na-alginate was also observed to have the best morphology with circular hardness polymatrix and highest viable cell. When investigating the stability of encapsulated cells and the stabilizer effect, free cells were almost dead within 30 or 40 days whereas encapsulated cells decreased in 10% after 30 days and 15-30% even after 120 days. As stabilizer for maintaining viable cell, both 1% starch and zeolite appeared to possess the level of 70-80% cell for bacteria and yeast until after 120 days.

• Nuclear Engineering and Technology
• /
• 제26권4호
• /
• pp.461-470
• /
• 1994

Sorption experiments of $^{60}$ Co, $^{85}$ Sr. and $^{137}$ Cs onto sandstone particles in a batch were carried out to investigate the migration mobility. Sorption kinetics and reversibility as well as sorption mechanisms were examined. Sorption reaction occurred mostly within 10 hours on the outer surface of the sandstone particle but diffusion into the inner surface of the mineral has still occurred after that time. In order to distinguish sorption types of radionuclides, a sequential chemical extraction was introduced. The sorbed radionuclides were then extracted by applying different solutions of synthetic groundwater, CaCl$_2$, KCl and KOX-HA Especially KCl is adopted to extract the ion-exchanged cesium. Sorption types considered are reversible sorption under groundwater condition, ion exchange, association with ferro-manganese oxides or oxyhydroxides, and irreversible fixation. Strontium sorbs onto the sandstone surface mainly by fast and reversible ion exchange reaction. However, cobalt and cesium do not sorb by simple process. The main sorptive binding of cobalt was the association with ferro-manganese oxides and the secondary one was irreversible fixation. Diffusion into the lattice of minerals controlled the sorption rate of cobalt The main sorptin type of cesium was irreversible fixation, while ion exchange reaction was the secondary importance. Hence the oreder of migration mobility for the three radionuclides was Sr$^{2＋}$ ＞ Co$^{2＋}$ ＞ Cs$^{＋}$ in the sandstones.

• Journal of the Korean Recycled Construction Resources Institute
• /
• 제9권2호
• /
• pp.152-160
• /
• 2021

Converter steel slag(BOF slag) is a vast amount of solid waste generated in the steelmaking process which has very low utilization rate in Korea. Due to the presence of free CaO which can derive bad volume stability in BOF slag, it usually land filled. For recycling BOF and identify its applicability as fine aggregate, this study investigates the fundamental characteristics of mortar with cement replaced ferronickel slag(FNS), which has the potential to be used as a binder. The results suggest that the mineral phases of BOF slag mainly include larnite(CaSiO₄), mayenite(Ca₁₂Al₁₄O₃₃) and wuestite(FeO) while olivine crystallines are shown in FNS. The results of flow and setting time reveals that the flowability and process of hardening increased when the amount of FNS and BOF slag incorporated was increased. The length change shows that the amount of change in the length of the mortar was almost constant regardless of mix proportion while compressive strength was reduced. Micro structure test results revealed that FNS or/and BOF slag mix took a long time to react in the cement matrix to form a complete hydration products. To achieve the efficient utilization of B OF slag as construction materials, proper replacement rate is necessary.