• Korean Journal of Heritage: History & Science
• /
• 제57권2호
• /
• pp.6-25
• /
• 2024

This study concentrated on a report on the results of smelting experiments conducted eight times by the Jungwon National Research Institute of Cultural Heritage, put together the goals and results of the operation, and examined changes in the content of experiments and in the experimental results. First, changes related to operation, such as the ratio of raw materials to fuel and the presence or absence of additives, were reviewed depending on the operation goal. In addition, the results of metallurgical analysis of raw materials, formations, and byproducts were summarized and reviewed by comparing them with materials excavated from the ruins. The operation method varied up to the eighth smelting experiment in terms of iron ore roasting, additives, and raw material/fuel ratio. After reviewing the results again, pure iron with a low carbon content began to be confirmed through metallurgical analysis. As a result, it was confirmed that the charging ratio of raw materials and fuel plays an important role depending on the purpose of production. In addition, most of the products are gray cast iron, and it was deemed that this is due to changes in the internal structure of the pig iron while it was left in the furnace for a long time. The iron was an ingot that was in a molten state even though the carbon content did not reach 4.3%, where the process reaction takes place, and it was deemed to have been caused by excessive operating temperature. Based on the previously reviewed results and the structure and shape of the experimental furnace used in other ironmaking technology restoration experiments, this study finally attempted to restore the structure of an ancient iron smelting furnace, including the furnace's upper structure. By comprehensively referring to the remaining conditions of the excavated iron smelting furnace and the characteristics of the blow pipe, the form of the ancient iron smelting furnace was subdivided into six categories: furnace wall thickness, furnace height, blower height, blow pipe size, furnace inner wall shape, and top shape, and a restoration plan was proposed. To improve the problems of the restoration plan and the Jungwon National Research Institute of Cultural Heritage's experiments that have been conducted through continuous trial and error, an experiment that reflects changes in operating methods by lowering the furnace height and controlling the blowing volume is necessary.

• Journal of Internet Computing and Services
• /
• 제25권1호
• /
• pp.99-107
• /
• 2024

Along with economic growth and industrial development, there is an increasing demand for various electronic components and device production of semiconductor, SMT component, and electrical battery products. However, these products may contain foreign substances coming from manufacturing process such as iron, aluminum, plastic and so on, which could lead to serious problems or malfunctioning of the product, and fire on the electric vehicle. To solve these problems, it is necessary to determine whether there are foreign materials inside the product, and may tests have been done by means of non-destructive testing methodology such as ultrasound ot X-ray. Nevertheless, there are technical challenges and limitation in acquiring X-ray images and determining the presence of foreign materials. In particular Small-sized or low-density foreign materials may not be visible even when X-ray equipment is used, and noise can also make it difficult to detect foreign objects. Moreover, in order to meet the manufacturing speed requirement, the x-ray acquisition time should be reduced, which can result in the very low signal- to-noise ratio(SNR) lowering the foreign material detection accuracy. Therefore, in this paper, we propose a five-step approach to overcome the limitations of low resolution, which make it challenging to detect foreign substances. Firstly, global contrast of X-ray images are increased through histogram stretching methodology. Second, to strengthen the high frequency signal and local contrast, we applied local contrast enhancement technique. Third, to improve the edge clearness, Unsharp masking is applied to enhance edges, making objects more visible. Forth, the super-resolution method of the Residual Dense Block (RDB) is used for noise reduction and image enhancement. Last, the Yolov5 algorithm is employed to train and detect foreign objects after learning. Using the proposed method in this study, experimental results show an improvement of more than 10% in performance metrics such as precision compared to low-density images.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제37권1호
• /
• pp.67-76
• /
• 2024

In this paper, we present a DIP-MLS testing method that combines digital image processing with a rigid body-based MLS differencing approach to measure mechanical variables and analyze the impact of target location and image resolution. This method assesses the displacement of the target attached to the sample through digital image processing and allocates this displacement to the node displacement of the MLS differencing method, which solely employs nodes to calculate mechanical variables such as stress and strain of the studied object. We propose an effective method to measure the displacement of the target's center of gravity using digital image processing. The calculation of mechanical variables through the MLS differencing method, incorporating image-based target displacement, facilitates easy computation of mechanical variables at arbitrary positions without constraints from meshes or grids. This is achieved by acquiring the accurate displacement history of the test specimen and utilizing the displacement of tracking points with low rigidity. The developed testing method was validated by comparing the measurement results of the sensor with those of the DIP-MLS testing method in a three-point bending test of a rubber beam. Additionally, numerical analysis results simulated only by the MLS differencing method were compared, confirming that the developed method accurately reproduces the actual test and shows good agreement with numerical analysis results before significant deformation. Furthermore, we analyzed the effects of boundary points by applying 46 tracking points, including corner points, to the DIP-MLS testing method. This was compared with using only the internal points of the target, determining the optimal image resolution for this testing method. Through this, we demonstrated that the developed method efficiently addresses the limitations of direct experiments or existing mesh-based simulations. It also suggests that digitalization of the experimental-simulation process is achievable to a considerable extent.

• Journal of Venture Innovation
• /
• 제7권3호
• /
• pp.183-228
• /
• 2024

This study aimed to develop a competency evaluation scale tailored to the specific needs of key talent in the ICT startup sector. Existing competency assessment tools are mostly designed for environments in large corporations or traditional small and medium-sized enterprises, failing to adequately reflect the dynamic requirements of rapidly evolving startups. For startups, where a small number of individuals directly impact company success, key talent is a critical asset. Accordingly, this study sought to create a scale that measures the competencies suited to the challenges and opportunities faced by startups, helping domestic startups establish more effective talent management strategies. The research initially selected 71 items through a literature review and in-depth interviews. Based on expert feedback that emphasized the need for more precise and clear descriptions, the item descriptions were revised, and a total of 65 items were developed through four rounds of content validation. Following preliminary and main surveys, a final set of 58 items was developed. The main survey conducted further factor analysis based on the three broad competency factors?knowledge, skills, and attitude?identified in the preliminary survey. As a result, 10 latent factors emerged: 6 items for task comprehension, 6 items for practical experience (tacit knowledge), 6 items for collaboration, 9 items for management and problem-solving, 9 items for practical skills, 4 items for self-direction, 5 items for goal orientation, 5 items for adaptability, 5 items for relationship orientation, and 3 items for organizational loyalty. The developed scale comprehensively covers the multifaceted nature of competencies, allowing for a thorough evaluation of essential skills such as technical ability, teamwork, innovation, and leadership, which are critical for startups. Therefore, the scale provides a tool that helps startup managers objectively and accurately assess candidates' competencies. It also supports the growth of employees within startups, maximizing the overall organizational performance. By utilizing this tool, startups can build a strong internal talent pool and continuously enhance employees' competencies, thereby strengthening organizational competitiveness. In conclusion, the competency evaluation scale developed in this study is a customized tool that aligns with the characteristics of startups and plays a crucial role in securing sustainable competitiveness in rapidly changing market environments. Additionally, it offers practical guidance to support the successful growth of domestic startups and help them maintain their competitive edge in the market, contributing to the development of the startup ecosystem and the growth of the national economy.

• Journal of Sinology and China Studies
• /
• 제79권
• /
• pp.245-275
• /
• 2019

The Chinese language is a topic-prominent language and the ancient form of the language is not an exception. This literature examines the theta roles and cases of the arguments by setting sentence structures regarding 'TopP', which marks the eventuality meaning of 'DO', from the Analects of Confucius. Summary of the analysis is as follows: 1. Like the contemporary Chinese, ancient Chinese has two topic types; one is a base-generated topic(so called dangling topic) and the other is a topic generated by the interior movement in the TP. 2. The sentence structure of TopP from the Analects of Confucius that marks the eventuality meaning of 'DO' can be divided into seven categories which are: T+S+V+O', 'T+ES+V+EO', 'T+ES+V+EO', 'T+S+V+EC', 'T+ES+V+C', 'T+ES+V+O+C', 'T+S+V+EO+C'. 3. The predicate(V-v) of TopP from the Analects of Confucius that marks the eventuality meaning of 'DO' has a meaning characteristics of [+ will] and [+ progressive]. 4. The subject of TopP from the Analects of Confucius that marks the eventuality meaning of 'DO' is assigned a thematic role of an , and the object is assigned a thematic role of a . 5. The complement of TopP from the Analects of Confucius that marks the eventuality meaning of 'DO' is composed of overt preposition head and its complements, which receives diverse thematic roles from the preposition. However, it does not have a direct selective relationship but an indirect relationship with the main verb of the sentence. 6. Every argument, which is the subject, object, complement, and adverb, of TopP from the Analects of Confucius that marks the eventuality meaning of 'DO' can theoretically be moved in front of the subject and be topicalized. 7. The topic phrase from the Analects of Confucius that marks the eventuality meaning of 'DO' is derived in the order of predicate(V-v), object, complement, adjunct, subject, and topic, but when interpreting it in Korean it is in inverse order, which is in the order of topic, subject, adjunct, complement, object and predicate(V-v).

• Korean Journal of Heritage: History & Science
• /
• 제37권
• /
• pp.285-307
• /
• 2004

Synthesize and examine petrological characteristic and geochemical characteristic by weathering formation of rock and progress of weathering laying stress on stone cultural properties of Unjusa temple of Chonnam Hwasun county site in this research. Examine closely weathering element that influence mechanical, chemical, mineralogical and physical weathering of rocks that accomplish stone cultural properties and these do quantification, wish to utilize by a basic knowledge for conservation scientific research of stone cultural properties by these result. Enforced component analysis of rock and mineralogical survey about 18 samples (pyroclastic tuff; 7, ash tuff; 4, granite ; 4, granitic gneiss; 3) all to search petrological characteristic and geochemical characteristic by weathering of Unjusa temple precinct stone cultural properties and recorded deterioration degree about each stone cultural properties observing naked eye. Major rock that constitution Unjusa temple one great geological features has strike of N30-40W and dip of 10-20NE being pyroclastic tuff. This pyroclastic tuff is ranging very extensively laying center on Unjusa temple and stone cultural properties of precinct is modeled by this pyroclastic tuff. Stone cultural propertieses of present Unjusa temple precinct are accomplishing structural imbalance with serious crack, and because weathering of rock with serious biological pollution is gone fairly, rubble break away and weathering and deterioration phenomenon such as fall off of a particle of mineral are appearing extremely. Also, a piece of iron and cement mortar of stone cultural properties everywhere are forming precipitate of reddish brown and light gray being oxidized. About these stone cultural properties, most stone cultural propertieses show SD(severe damage) to MD(moderate damage) as result that record Deterioration degree. X-ray diffraction analysis result samples of each rock are consisted of mineral of quartz, orthoclase,plagioclase, calcite, magnetite etc. Quartz and feldspar alterated extremely in a microscopic analysis, and biotite that show crystalline form of anhedral shows state that become chloritization that is secondary weathering mineral being weathered. Also, see that show iron precipitate of reddish brown to crack zone of tuff everywhere preview rock that weathering is gone deep. Tuffs that accomplish stone cultural properties of study area is illustrated to field of Subalkaline and Peraluminous, $SiO_2$(wt.%) extent of samples pyroclastic tuff 70.08-73.69, ash tuff extent of 70.26-78.42 show. In calculate Chemical Index of Alteration(CIA) and Weathering Potential Index(WPI) about major elements extent of CIA pyroclastic tuff 55.05-60.75, ash tuff 52.10-58.70, granite 49.49-51.06 granitic gneiss shows value of 53.25-67.14 and these have high value gneiss and tuffs. WPI previews that is see as thing which is illustrated being approximated in 0 lines and 0 lines low samples of tuffs and gneiss is receiving esaily weathering process as appear in CIA. As clay mineral of smectite, zeolite that is secondary weathering produce of rock as result that pick powdering of rock and clothing material of stone cultural properties observed by scanning electron micrographs (SEM). And roots of lichen and spore of hyphae that is weathering element are observed together. This rock deep organism being coating to add mechanical weathering process of stone cultural properties do, and is assumed that change the clay mineral is gone fairly in stone cultural properties with these. As the weathering of rocks is under a serious condition, the damage by the natural environment such as rain, wind, trees and the ground is accelerated. As a counter-measure, the first necessary thing is to build the ground environment about protecting water invasion by making the drainage and checking the surrounding environment. The second thing are building hardening and extirpation process that strengthens the rock, dealing biologically by reducing lichens, and sticking crevice part restoration using synthetic resin. Moreover, it is assumed to be desirable to build the protection facility that can block wind, sunlight, and rain which are the cause of the weathering, and that goes well with the surrounding environment.

• Korean Journal of Soil Science and Fertilizer
• /
• 제14권3호
• /
• pp.117-129
• /
• 1981

An experiment with the tobacco plant was conducted in the pots. A sandy humic soil was used with 2 levels of pH, 3.5 and 5.8 with 2 kinds of anions, Cl as $NH_4Cl$ and $SO_4$ as $(NH_4)_2SO_4$, and with 4 levels of pF, 1.5, 2.0, 2.5, and 3.5. The pH-treatment created different N-forms; $NH_4$ at low pH(3.5) and $NO_3$ at high pH (5.8). The results are summarized as follows: 1. At low pH (3.5) with high concentration of $NH_4$ given as $NH_4Cl$, the high content of $NH_4$ and Cl in tobacco resulted in plants suffering from $NH_4$ and Cl toxicity as well as Mn toxicity. As a result of these toxicity, an extremly abnormal growth of tobacco was clearly appeared. In the tobacco grown at low pH with $NH_4$ given as $(NH_4)_2SO_4$, a large amount of the $NH_4$ uptake developed Mg and Ca deficiencies. $NH_4-N$, which had been applied to the soil of high pH (5.8), was almost completely transformed into $NO_3-N$ by nitrification and, on this low acidic soil, the plants were all healthy regardless of Cl or $SO_4$ added together with $NH_4-N$. However, dry matter production was higher and maturity faster when $SO_4$ was used as anion than when Cl was used. 2. High moisture content in soil, to some extent, is necessary for a good development and growth of the tobacco plant. Phosphate uptake seemed to be limited at higher moisture stress. The dry matter yield of tops and roots of tobacco were in the order of pF 1.8 > 2.1 > 2.6 > 3.6, respectively. 3. Data of chemical analysis and dry matter yields of tops and roots showed that the tobacco plant followed the normal (C-A) concept. In the normal growth of plants, the carboxylate content of tops was quite comparable to the estimated (C-A) values. If $NH_4$ content of plants remains in quite high quantities, it must be analysed and taken into consideration for the (C-A) calculation. Al is not transported toward tops in toxic amounts due to its high immobility, it mostly stay in or on the roots, probably due to precipitation as a aolt. When Al is present in high quantities, it has to be considered into the (C-A) calculation.

• Journal of Intelligence and Information Systems
• /
• 제23권1호
• /
• pp.23-46
• /
• 2017

Although there have been cases of evaluating the value of specific companies or projects which have centralized on developed countries in North America and Europe from the early 2000s, the system and methodology for estimating the economic value of individual technologies or patents has been activated on and on. Of course, there exist several online systems that qualitatively evaluate the technology's grade or the patent rating of the technology to be evaluated, as in 'KTRS' of the KIBO and 'SMART 3.1' of the Korea Invention Promotion Association. However, a web-based technology valuation system, referred to as 'STAR-Value system' that calculates the quantitative values of the subject technology for various purposes such as business feasibility analysis, investment attraction, tax/litigation, etc., has been officially opened and recently spreading. In this study, we introduce the type of methodology and evaluation model, reference information supporting these theories, and how database associated are utilized, focusing various modules and frameworks embedded in STAR-Value system. In particular, there are six valuation methods, including the discounted cash flow method (DCF), which is a representative one based on the income approach that anticipates future economic income to be valued at present, and the relief-from-royalty method, which calculates the present value of royalties' where we consider the contribution of the subject technology towards the business value created as the royalty rate. We look at how models and related support information (technology life, corporate (business) financial information, discount rate, industrial technology factors, etc.) can be used and linked in a intelligent manner. Based on the classification of information such as International Patent Classification (IPC) or Korea Standard Industry Classification (KSIC) for technology to be evaluated, the STAR-Value system automatically returns meta data such as technology cycle time (TCT), sales growth rate and profitability data of similar company or industry sector, weighted average cost of capital (WACC), indices of industrial technology factors, etc., and apply adjustment factors to them, so that the result of technology value calculation has high reliability and objectivity. Furthermore, if the information on the potential market size of the target technology and the market share of the commercialization subject refers to data-driven information, or if the estimated value range of similar technologies by industry sector is provided from the evaluation cases which are already completed and accumulated in database, the STAR-Value is anticipated that it will enable to present highly accurate value range in real time by intelligently linking various support modules. Including the explanation of the various valuation models and relevant primary variables as presented in this paper, the STAR-Value system intends to utilize more systematically and in a data-driven way by supporting the optimal model selection guideline module, intelligent technology value range reasoning module, and similar company selection based market share prediction module, etc. In addition, the research on the development and intelligence of the web-based STAR-Value system is significant in that it widely spread the web-based system that can be used in the validation and application to practices of the theoretical feasibility of the technology valuation field, and it is expected that it could be utilized in various fields of technology commercialization.

• Journal of Korean Society of Forest Science
• /
• 제51권1호
• /
• pp.56-65
• /
• 1981

The training of forest ranger level and forest worker level to push the sound forest management and to increase the employment effects in forestry will be done without delay as soon as possible. So several opinions to be considered are here discussed. 1. The ranger level will be at first completely trained with the technics developed and modernized, to process really the sound forest management based on the concept of ecological and economical technic. 2. The organization of vocational training and it's systematical training method will be newly adopted to increase the labour efficiency in forestry. The case of fulltime worker level should be more intensively trained and part-time worker or forest famer level should be trained by the forest ranger and skilled worker with visiting circularly their working place. And the daily employed workers and village people for working should be done by the skilled workers. 3. The training subjects for them at the beginning step will be exploited by the instructors and concerned experts with studying their current conditions. Their practical training is more reasonable to do in the practically managing forest and to carry out under the responsible of leader of this forest. 4. The instructors included rangers of training forest will get specially certain intensive training through the aids of outside experts or through the group instruction with them. 5. The training fields and their reasons to be learned by them are discussed in this paper from the basic knowledge to the skill technics. 6. In oder to systematize and mordernize more rapidly our forest technics that need for training them and also applying directly in the forest management, a total effort of certain type by scientists and technicians scattered individually all over the country is now earnestly demanded to synthesize their knowledge, technic and experience. So to do like this, the establishment of certain organization through which can do their total efforts together will be considered and assisted by the concerned authority. 7. For better lieving of full-time workers, the whole-round year working amount have to be supplied though the work technic-and working plan development. And under the conditions that the timber harvesting work is still not so enough and it has a bad climatic season, the in-side working system and side - job aids will be developed for their sound lieving. 8. The organization of labour management will be soon introduced in the concerning administrativ authority to solve the forest labour problems and to increase the employing effects in forestry in future. 9. The supply programm of improved and trained tools and maschines for forest work is also considered to use by the trained persons. If not to do so, the training results will return to the original condition and will get nothing any more.

• Applied Biological Chemistry
• /
• 제14권2호
• /
• pp.137-148
• /
• 1971

Studies were carried out to investigate the main fermentation microorganisms and their flora changes during Korean native soy-sauce fermentation. Korean native Maeju loaves collected from 5 Do's were separated into surface and inner parts. Four different soy-sauces-the surface part Maeju fermented soy-sauce, the inner part, the surface and inner part combined Maeju fermented soy-sauce, and the semi-Japanese type soy-sauce were fermented and the changes of fermentation microorganism flora and the various chemical components during the period of their fermentations were studied. Besides, 14 home-made soy-sauces collected from 14 different places all over Korea were examined in comparison with the laboratory soy-sauces and to determine the characteristics of Korean native soy-sauce. The results were as follows: 1. The main microorganisms in Korean native soy-sauce fermentation were determined as; Aerobic bacteria: Bacillus subtilis, Bacillus pumilus Lactic acid bacteria: Pediococcus halophilus, Leuconostoc mesenteroides Yeasts: Torulopsis datila, Saccharomyces rouxii 2. Microflora changes during Korean native soy-sauce fermentation were as follows; Aerobic bacteria increased until the 2nd week of fermentation and then gradually decreased. The lactic acid bacteria increased until the 3rd week, after which decreased. When the lactic acid fermentation lowered the pH value to below the 5.4, yeasts were able to grow and participate the fermentation. As the production of organic acids amounted, to a certain height, the growth of all microorganisms lead to the period of decline or death at about the 2nd month of fermentation. After boiling of soy-sauce most microorganisms except a few of Bacillus sp. disappeared. Occosionally yeasts and lactic acid bacteria survived depending upon the composition of soy-sauce. 3. Changes of general chemical components influencing the microflora were investigated for the period of Korean native soy-sauce fermentation. Tetal acidity, salt concentration and total nitrogen were increasing steadily over the entire period of fermentation. pH values were dropping to a certain degree of about 4.5. Salt concentration and pH value seemed to be the important factors influencing the microflora. 4. The microflora were influenced by chemical components of soy-sauce. Aerobic bacteria were able to survive in all soy-sauce as they made spores. Growth of lactic acid bacteria was inhited at 23-26% of salt concentration and pH 4.8. Soy-sauce yeasts started to grow only at pH below 5.4 and seemed to be inhibited at around 26% of salt concentration under pH 4.5-4.7. 5. The open kettle boiling of soy-sauce, the characteristic process of Korean native soy-sauce manufacturing, was effective to sterilize microorganisms, increase the salt concentration, and coagulate proteins. 6. The average viable cell counts of microorganism found in collected samples of home-made Korean native soy-sauces were; Aerobic bacteria: $53{\times}10^2\;cell/ml$ Lactic acid bacteria: 34 cell/ml Yeasts: 14 cell/ml The average values of chemical compositions of samples of home-made Korean native soy-sauce were; Salt concentration: 28.9% pH value: 4.79 Total acidity(lactic acid): 0.91g/100ml Total nitrogen: 1.09g/100ml